oxirane
CAS No.: 75-21-8 Formula: C2H4O Molecular Weight: 44.05260
Search Suppliers

oxirane

CAS No.: 75-21-8 Formula: C2H4O Molecular Weight: 44.05260
Suppliers: All (32) China Suppliers (32) Price Available (8) Contractor (3)

Basic Info

Chemical Name oxirane
Synonyms

ETHYLENE OXIDE; ETO; Merpol; Oxane; Oxiraan; E.O.; epoxyethane; T-Gas; 1,2-epoxyethane; Oxirane; C2H4O; oxacyclopropane; Oxiran; Expand

CAS No. 75-21-8
Molecular Formula C2H4O
Molecular Weight 44.05260
PSA 12.53000
LogP 0.01660

Properties

Appearance & Physical State COLOURLESS COMPRESSED LIQUEFIED GAS.
Density 0.994 g/cm3
Boiling Point 10.7ºC at 760 mmHg
Melting Point -111ºC(lit.)
Flash Point 低于-17.7ºC
Refractive Index n20/D 1.3597(lit.)
Storage Condition Refrigerator

Safety Info

RTECS KX2450000
Hazard Class 2.3
Safety Statements 53-45-36/37-16-24/25-23
HS Code 2910100000
WGK Germany 2
RIDADR UN 2037
Risk Statements R45
Hazard Codes F+; T
Hazard Declaration H220; H280; H315; H319; H331; H335; H340; H350
Caution Statement P201; P210; P261; P305 + P351 + P338; P311; P410 + P403
Symbol GHS02, GHS04, GHS06, GHS08
Signal Word Danger
SDS 1.0 Expand

SDS 1.0

Collapse
Download/Modify | Technical supported by XiXisys.com. For US version, EU version (23 languages) and more, please refer to xixisys.com/en/sds/search

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 16, 2017

Revision Date: Aug 16, 2017

1.Identification

1.1 GHS Product identifier

Product name oxirane

1.2 Other means of identification

Product number -
Other names ETO

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only. Ethylene oxide is used mainly as a chemical intermediate in the manufacture of textiles, detergents, polyurethane foam, antifreeze, solvents, medicinals, adhesives, and other products. Relatively small amounts of ethylene oxide are used as a fumigant, a sterilant for food (spices) and cosmetics, and in hospital sterilization of surgical equipment and plastic devices that cannot be sterilized by steam.
Uses advised against no data available

1.4 Supplier's details

Company MOLBASE (Shanghai) Biotechnology Co., Ltd.
Address Floor 4 & 5, Building 12, No. 1001 North Qinzhou Road,
Xuhui District, Shanghai, China
Telephone +86(21)64956998
Fax +86(21)54365166

1.5 Emergency phone number

Emergency phone number +86-400-6021-666
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

2.Hazard identification

2.1 Classification of the substance or mixture

Gases under pressure: Compressed gas

Flammable gases, Category 1

Skin irritation, Category 2

Eye irritation, Category 2

Acute toxicity - Inhalation, Category 3

Specific target organ toxicity – single exposure, Category 3

Germ cell mutagenicity, Category 1B

Carcinogenicity, Category 1B

2.2 GHS label elements, including precautionary statements

Pictogram(s)
Signal word

Danger

Hazard statement(s)

H220 Extremely flammable gas

H315 Causes skin irritation

H319 Causes serious eye irritation

H331 Toxic if inhaled

H335 May cause respiratory irritation

H340 May cause genetic defects

H350 May cause cancer

Precautionary statement(s)
Prevention

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P264 Wash ... thoroughly after handling.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

P271 Use only outdoors or in a well-ventilated area.

P201 Obtain special instructions before use.

P202 Do not handle until all safety precautions have been read and understood.

Response

P377 Leaking gas fire: Do not extinguish, unless leak can be stopped safely.

P381 In case of leakage, eliminate all ignition sources.

P302+P352 IF ON SKIN: Wash with plenty of water/...

P321 Specific treatment (see ... on this label).

P332+P313 If skin irritation occurs: Get medical advice/attention.

P362+P364 Take off contaminated clothing and wash it before reuse.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P337+P313 If eye irritation persists: Get medical advice/attention.

P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P311 Call a POISON CENTER/doctor/…

P312 Call a POISON CENTER/doctor/…if you feel unwell.

P308+P313 IF exposed or concerned: Get medical advice/ attention.

Storage

P410+P403 Protect from sunlight. Store in a well-ventilated place.

P403 Store in a well-ventilated place.

P403+P233 Store in a well-ventilated place. Keep container tightly closed.

P405 Store locked up.

Disposal

P501 Dispose of contents/container to ...

2.3 Other hazards which do not result in classification

none

3.Composition/information on ingredients

3.1 Substances

Chemical name Common names and synonyms CAS number EC number Concentration
oxirane oxirane 75-21-8 none 100%

4.First-aid measures

4.1 Description of necessary first-aid measures

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

Fresh air, rest. Refer for medical attention.

In case of skin contact

Remove contaminated clothes. ON FROSTBITE: rinse with plenty of water, do NOT remove clothes. Rinse skin with plenty of water or shower. Refer for medical attention .

In case of eye contact

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

If swallowed

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

4.2 Most important symptoms/effects, acute and delayed

It can cause death. Lowest inhalation concentration causing toxic effects is 12500 ppm/10 seconds. It is a strong skin irritant. Neurological disorders and even death have been reported. (EPA, 1998)

4.3 Indication of immediate medical attention and special treatment needed, if necessary

Establish and maintain vital functions. ... Administer warm humidified oxygen and bronchodilators, if needed. Treat cardiac dysrhythmias and control convulsions with standard treatments. Monitor for several hours after exposure. Significant exposure usually causes effects that indicate hospital admission.

5.Fire-fighting measures

5.1 Extinguishing media

Suitable extinguishing media

GAS: Poisonous gases are produced in fire. Do not estinguish the fire unless the flow of gas can be stopped and any remaining gas is out of the line. Specially trained personnel may use fog lines to cool exposures and let the fire burn itself out. Vapors are heavier than air and will collect in low areas. Vapors may travel long distances to ignition sources and flashback. Vapors in confined area may explode in fire. Storage containers and parts of containers may rocket great distances, in many directions. If materials or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters. Notify local health and fire officials and pollution control agencies. From a secure, explosion-proof location, use water spray to cool exposed containers. If cooling streams are ineffective (venting sound increases in volume and pitch, tank discolors, or shows any signs of deforming), withdraw immediately to a secure position. If employees are expected to fight fires, they must be trained and equipped. LIQUID: Poisonous gases are produced in fire. Use dry chemical, carbon dioxide, or foam extinguishers. Although soluble in water, solutions will continue to burn until diluted to approximately 22 volumes of water to one volume of ethylene oxide. Vapors are heavier than air and will collect in low areas. Vapors may travel long distances to ignition sources and flashback. Vapors in confined area may explode in fire. Storage containers and parts of containers may rocket great distances, in many directions. If materials or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters. Notify local health and fire officials and pollution control agencies. From a secure, explosion-proof location, use water spray to cool exposed containers. If cooling streams are ineffective (venting sound increases in volume and pitch, tank discolors, or shows any signs of deforming), withdraw immediately to a secure position. If employees are expected to fight fires, they must be trained and equipped.

5.2 Specific hazards arising from the chemical

Severe explosion hazard when exposed to heat or flame. Irritating vapors are generated when heated. Vapor is heavier than air and may travel considerable distance to a source of ignition and flash back. Vapor forms explosive mixtures with air over a wide range. Liquid is not detonable but the vapor may be readily initiated into explosive decomposition. Avoid metal fittings containing copper, silver, mercury or magnesium; ammonia, oxidizing agents; acids, organic bases; amines; certain salts; alcohols; mercaptans, ferric chloride; magnesium perchlorate; m-nitroaniline; trimethylamine, potassium, tin chlorides; alkanethiols; bromoethane; aluminum chloride; aluminum oxide; iron chlorides; and iron oxides. Avoid air, heat, acids and bases, metal or metal chloride catalysts. Hazardous polymerization may occur. Avoid acids; covalent halides such as chlorides of aluminum, iron (III), tin (IV); basic materials like alkali hydrides, ammonia, amines, and potassium; catalytically active solids such as aluminum or iron oxides or rust, chlorides of boron, aluminum, tin, and iron; some carbonates; and metals such as copper and copper alloys (EPA, 1998)

5.3 Special protective actions for fire-fighters

Wear self-contained breathing apparatus for firefighting if necessary.

6.Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.

6.2 Environmental precautions

Evacuate danger area! Consult an expert! Personal protection: gas-tight chemical protection suit including self-contained breathing apparatus. Ventilation. Do NOT wash away into sewer. NEVER direct water jet on liquid. Remove gas with fine water spray.

6.3 Methods and materials for containment and cleaning up

GAS: Evacuate and restrict persons not wearing protective equipment from area of spill or leak until cleanup is complete. Remove all ignition sources. Establish forced ventilation to keep levels below explosive limit. Stop the flow of gas if it can be done safely. If source of leak us a cylinder and the leak cannot be stopped in place, remove leaking cylinder to a safe place in the open air, and repair leak or allow cylinder to empty. Keep this chemical out of a confined space, such as a sewer, because of the possibility of an explosion, unless the sewer is designed to prevent the build-up of explosive concentrations. LIQUID: For small spills flush area with flooding amounts of water. For large spills, dike spill for later disposal. Absorb liquids in vermiculite, dry sand, earth, or a similar non-organic materials and deposit in sealed containers. May also be covered with weak reducing agents; resulting sludge neutralized and flushed to sewer. Collect powdered material in the most convenient and safe manner and deposit in sealed containers. Ventilate area of spill or leak after clean-up is complete. It may be necessary to contain and dispose of this chemical as a hazardous waste. If material or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters. Contact your Department of Environmental Protection or your regional office of the federal EPA for specific recommendations. If employees are required to clean-up spills, they must be properly trained and equipped.

7.Handling and storage

7.1 Precautions for safe handling

Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities

Fireproof. Cool.Prior to working with this chemical you should be trained on its proper handling and storage. Before entering a confined space where this chemical may be present, check to make sure that an explosive concentration does not exist. It must be stored to avoid contact with even small amounts of acids (such as nitric or sulfuric acids); alkalis (such as sodium bydroxide or potassium hydroxide); cataylic anhydrous chlorides of iron, aluminum or tin; iron or aluminum oxide; or metallic potassium hydroxide); catalytic anhydrous chlorides of iron, aluminum or tin; iron or aluminum oxide; or metallic potassium hydroxide, since it may react by itself, liberating much heat and causing a possible explosion. Ethylene oxide should not contact oxidizers (such as perchlorates, perxoides, permanganates, chlorates, and nitrates) since an explosion could occur. Store in tightly closed containers in a cool, well-ventilated area away from heat, sparks, or sunlight. Sources of ignition such as smoking and open flames are prohibited where ethlyene oxide is handled, used, or stored. Metal containers involving the transfer of 5 gallons or more of ethylene oxide should br grounded and bonded. Drums must be equipped with self-closing valves, pressure vacuum bungs, and flame arresters. Use only non-sparking tools and equipment, especially when opening and closing containers of ethylene oxide . Wherever ethylene oxide is used, handled, manufactured, or stored, use explosion-proof electrical equipment and fittings.

8.Exposure controls/personal protection

8.1 Control parameters

Occupational Exposure limit values

Recommended Exposure Limit: 10 Hr Time-Weighted Avg: <0.1 ppm (<0.18 mg/cu m).

Recommended Exposure Limit: 10 min/day ceiling value: 5 ppm (9 mg/cu m).

NIOSH considers ethylene oxide to be a potential occupational carcinogen.

Biological limit values

no data available

8.2 Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

8.3 Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Respiratory protection

Wear dust mask when handling large quantities.

Thermal hazards

no data available

9.Physical and chemical properties

Physical state COLOURLESS COMPRESSED LIQUEFIED GAS.
Colour Colorless ... gas at ordinary room temp and pressure; liquid below 12°C
Odour Sweet
Melting point/ freezing point -111ºC(lit.)
Boiling point or initial boiling point and boiling range 10.7°C(lit.)
Flammability Flammable GasExtremely flammable.
Lower and upper explosion limit / flammability limit Lower flammable limit: 3.0% by volume; Upper flammable limit: 100% by volume
Flash point -20°C
Auto-ignition temperature 428.89°C (USCG, 1999)
Decomposition temperature no data available
pH no data available
Kinematic viscosity 9.45X10-3 mPa.s (25°C, gas) and 0.254 mPa.s (10°C, liquid)
Solubility Miscible
Partition coefficient n-octanol/water (log value) log Kow = -0.30
Vapour pressure 1095 mm Hg at 20°C (EPA, 1998)
Density and/or relative density 0.882g/mLat 25°C(lit.)
Relative vapour density 1.49 (EPA, 1998) (Relative to Air)
Particle characteristics no data available

10.Stability and reactivity

10.1 Reactivity

no data available

10.2 Chemical stability

HYDROLYZES SLOWLY IN AQ SOLN

10.3 Possibility of hazardous reactions

Flammable gas.The gas is heavier than air and may travel along the ground; distant ignition possible.Colorless gas at room temperature (b.p. 11° C), confirmed carcinogen. Highly flammable, severe explosion hazard when exposed to flame. The autoignition temperature may be as low as 140° C in presence of rust. Rapid compression of the vapor with air causes explosion. Ethylene oxide vapor may be initiated into explosive decomposition in absence of air [Hess, L. G., et al., Ind. Eng. Chem., 1950, 42, p. 1251]. Metal fittings containing magnesium, copper or silver should be avoided, since traces of acetylene in ethylene oxide may produce metal acetylides capable of detonating the vapor [MCA SD-38, 1971]. Violent polymerization occurs on contact with strong bases (alkali hydroxides, ammonia) or acids, amines, metallic potassium, oxides (aluminum oxide, iron oxide, rust), covalent halides (aluminum chloride, ferric chloride, tin(IV) chloride) [Gupta, A. K., J. Soc. Chem. Ind., 1949, 68, p. 179]. Violent reaction with m-nitroaniline, magnesium perchlorate, mercaptans, thiols, triethylamine [Bretherick, 5th ed., 1995, p. 316]. Ethylene oxide and SO2 can react violently in pyridine solution with pressurization if ethylene oxide is in excess (Nolan, 1983, Case History 51).

10.4 Conditions to avoid

no data available

10.5 Incompatible materials

Forms explosive mixture with air. Dangerously reactive; may rearrange chemically and/or polymerize violently with evolution of heat, when in contact with highly active catalytic surfaces such as anhydrous chlorides or iron, tin and aluminum, pure oxides of iron and aluminum, and alkali metal hydroxides. Even small amounts of strong acids, alkalis, oxidizers can cause a reaction. Avoid contact with copper. Protect container from physical damage, sun and heat. Attacks some plastics, rubber or coatings.

10.6 Hazardous decomposition products

Liquid ethylene oxide is not detonable, but the vapor may be readily initiated into explosive decomposition.

11.Toxicological information

Acute toxicity

  • Oral: LD50 Rat (male) oral 330 mg/kg /From table/
  • Inhalation: LC50 Rat inhalation 1462 ppm/4 hr (2.63 mg/L)
  • Dermal: no data available

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

NTP: Known to be a human carcinogen

Reproductive toxicity

Some evidence exists indicating that inhalation exposure to ethylene oxide can cause an increased rate of miscarriages in female workers. These effects could be seen from acute, as well as chronic, exposure. Various adverse reproductive effects have been noted in inhalation exposure studies of animals including decreased number of implantation sites, decreased testicular weights and sperm concentration, and testicular degeneration.

STOT-single exposure

no data available

STOT-repeated exposure

no data available

Aspiration hazard

no data available

12.Ecological information

12.1 Toxicity

  • Toxicity to fish: LC50; Species: Pimephales promelas (Fathead minnow); Conditions: freshwater, static, dechlorinated tap water, aerated; Concentration: 274000 ug/L for 24 hr (95% confidence interval: 150000-500000 ug/L) /formulated product
  • Toxicity to daphnia and other aquatic invertebrates: LC50; Species: Daphnia magna (Water flea); Conditions: freshwater, static; Concentration: 260000 ug/L for 24 hr /formulated product
  • Toxicity to algae: no data available
  • Toxicity to microorganisms: no data available

12.2 Persistence and degradability

AEROBIC: In a dilution bottle test, ethylene oxide 3-5% degradation was observed after 5 days and 52% degradation was observed after 20 days(1,2). In a river die-away test, half-life measurements for ethylene oxide in sterile and natural river water were not appreciably different, owing to the hydrolytic degradation of ethylene oxide being more rapid than biodegradation in aqueous media(4). Since ethylene oxide hydrolyzes to ethylene glycol which is readily biodegraded, the importance of biodegradation of ethylene oxide in aquatic environments is not able to be accurately assessed(2). Ethylene oxide biodegradation rate constants measured at a full-scale wastewater treatment plant were 0.38 and 0.59 ug/min-g biomass(3).

12.3 Bioaccumulative potential

An estimated BCF of 3 was calculated in fish for ethylene oxide(SRC), using a log Kow of -0.30(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).

12.4 Mobility in soil

Koc of ethylene oxide was reported to be 2.20(1). According to a classification scheme(2), this estimated Koc value suggests that ethylene oxide is expected to have very high mobility in soil(SRC).

12.5 Other adverse effects

no data available

13.Disposal considerations

13.1 Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

14.Transport information

14.1 UN Number

ADR/RID: UN1040 IMDG: UN1040 IATA: UN1040

14.2 UN Proper Shipping Name

ADR/RID: ETHYLENE OXIDE, or ETHYLENE OXIDE WITH NITROGEN up to a total pressure of 1 MPa (10 bar) at 50 °C
IMDG: ETHYLENE OXIDE, or ETHYLENE OXIDE WITH NITROGEN up to a total pressure of 1 MPa (10 bar) at 50 °C
IATA: ETHYLENE OXIDE, or ETHYLENE OXIDE WITH NITROGEN up to a total pressure of 1 MPa (10 bar) at 50 °C

14.3 Transport hazard class(es)

ADR/RID: 2.3 IMDG: 2.3 IATA: 2.3

14.4 Packing group, if applicable

ADR/RID: unknown IMDG: unknown IATA: unknown

14.5 Environmental hazards

ADR/RID: no IMDG: no IATA: no

14.6 Special precautions for user

no data available

14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

no data available

15.Regulatory information

15.1 Safety, health and environmental regulations specific for the product in question

Chemical name Common names and synonyms CAS number EC number
oxirane oxirane 75-21-8 none
European Inventory of Existing Commercial Chemical Substances (EINECS) Listed.
EC Inventory Listed.
United States Toxic Substances Control Act (TSCA) Inventory Listed.
China Catalog of Hazardous chemicals 2015 Listed.
New Zealand Inventory of Chemicals (NZIoC) Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS) Listed.
Vietnam National Chemical Inventory Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) Listed.

16.Other information

Information on revision

Creation Date Aug 16, 2017
Revision Date Aug 16, 2017

Abbreviations and acronyms

  • CAS: Chemical Abstracts Service
  • ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
  • RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
  • IMDG: International Maritime Dangerous Goods
  • IATA: International Air Transportation Association
  • TWA: Time Weighted Average
  • STEL: Short term exposure limit
  • LC50: Lethal Concentration 50%
  • LD50: Lethal Dose 50%
  • EC50: Effective Concentration 50%

References

  • IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
  • HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
  • IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
  • eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
  • CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
  • ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
  • ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
  • Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
  • ECHA - European Chemicals Agency, website: https://echa.europa.eu/

Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product.
MSDS Expand
1H NMR : parameter neatExpand

NMR Spectrum 1H NMR : parameter neat

Collapse

C2 H4 O neat
ethylene oxide

Parameter ppm Hz
D(A) 2.54

MORTIMER,F.S. J.MOL.SPECTROSC. 5, 199 (1960)
J(C-13,A):175.8HZ. J(A-CIS):4.45HZ. J(A-TRANS):3.1HZ.

GC Analysis

Total 9 Documents >>
Column type Active phase Temperature (°C) Retention Index (I) Temperature Control Method
Packed Apiezon L 120. 397. isothermal
Packed Apiezon L 160. 410. isothermal
Capillary OV-101 - 417. temperature ramp
Capillary Methyl Silicone - 417. custom temperature program
Capillary SPB-1 - 405. custom temperature program
Recommended Suppliers
More Suppliers>>
Other items you might be interested in
Category in MOLBASE