Recommended Suppliersmore
Tetrabutylammonium Azide
CAS No.: 993-22-6
Synonyms:
Formula: C16H36N4
Exact Mass: 284.29400
Molecular Weight: 284.48400
PSA: 37.39000
LogP: 5.32246
Reference Price: $2,360/kg Inquiry Now
Tetrabutylammonium Azide 993-22-6 MSDS
  Tetrabutylammonium Azide      Revision number: 5    
  SAFETY DATA SHEET

Section 1. IDENTIFICATION
  Product name:        Tetrabutylammonium Azide    
    
  Revision number:        5    

Section 2. HAZARDS IDENTIFICATION
  GHS classification
  PHYSICAL HAZARDS
    Category 2
  Flammable solids
  HEALTH HAZARDS
    Category 3
  Acute toxicity (Oral)
  Acute toxicity (Dermal)        Category 3    
    Category 3
  Acute toxicity (Inhalation)
  Skin corrosion/irritation        Category 2    
    Category 2A
  Serious eye damage/eye irritation
  ENVIRONMENTAL HAZARDS        Not classified    
  GHS label elements, including precautionary statements
  Pictograms or hazard symbols
    Danger
  Signal word
  Hazard statements        Flammable solid    
    Toxic if swallowed, in contact with skin or if inhaled
    Causes skin irritation
    Causes serious eye irritation
  Precautionary statements:
    Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
  [Prevention]
    Use explosion-proof electrical/ventilating/lighting equipment.
    Avoid breathing dust/fume/gas/mist/vapours/spray.
    Use only outdoors or in a well-ventilated area.
    Do not eat, drink or smoke when using this product.
    Wash hands thoroughly after handling.
    Wear protective gloves and eye/face protection.
  Tetrabutylammonium Azide

Section 2. HAZARDS IDENTIFICATION
  [Response]        IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for    
    breathing. Call a POISON CENTER or doctor/physician.
    IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Rinse
    mouth.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
    if present and easy to do. Continue rinsing.
    If eye irritation persists: Get medical advice/attention.
    IF ON SKIN: Gently wash with plenty of soap and water.
    If skin irritation occurs: Get medical advice/attention.
    Remove/Take off immediately all contaminated clothing.
    Wash contaminated clothing before reuse.
    Call a POISON CENTER or doctor/physician if you feel unwell.
  [Storage]        Store in a well-ventilated place. Keep container tightly closed.    
    Store locked up.
    Dispose of contents/container through a waste management company authorized by
  [Disposal]
    the local government.

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
    Substance
  Substance/mixture:
  Components:        Tetrabutylammonium Azide    
  Percent:        >95.0%(T)    
  CAS Number:        993-22-6    
  Chemical Formula:        C16H36N4    

Section 4. FIRST AID MEASURES
    Remove victim to fresh air and keep at rest in a position comfortable for breathing.
  Inhalation:
    Call a POISON CENTER or doctor/physician.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. Call a POISON CENTER or doctor/physician.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing. If eye irritation persists: Get medical
    advice/attention.
  Ingestion:        Immediately call a POISON CENTER or doctor/physician. Rinse mouth.    
  Protection of first-aiders:        A rescuer should wear personal protective equipment, such as rubber gloves and air-    
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, water spray, carbon dioxide.    
  media:
  Specific hazards arising Explosion risk in case of fire. Fight fire remotely due to the risk of explosion.
  from the chemical:        Take care as it may decompose upon combustion or in high temperatures to    
    generate poisonous fume.
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
    spraying with water. Eliminate all ignition sources if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions,        Use extra personal protective equipment (P3 filter respirator for toxic particles). Keep    
  protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should
  emergency procedures: be controlled around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Tetrabutylammonium Azide

Section 6. ACCIDENTAL RELEASE MEASURES
  Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
  containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
  up: appropriate laws and regulations.
  Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
  hazards:        case of a fire. Use spark-proof tools and explosion-proof equipment.    

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Be careful not to cause leakage, overflow, or dispersion. Steam should not be
    generated unnecessarily. Keep away from heat/sparks/open flame/hot surfaces. -No
    smoking. Take measures to prevent the build up of electrostatic charge. Use
    explosion-proof equipment. Avoid shock and friction. Wash hands and face before
    breaks and immediately after handling the product.
    Use a closed system if possible. Use a local exhaust if dust or aerosol will be
    generated.
  Advice on safe handling: Avoid contact with skin, eyes and clothing.
  Conditions for safe storage, including any
  incompatibilities
  Storage conditions:        Keep container tightly closed. Store in an explosion-poof refregerator.    
    Store under inert gas.
    Protect from moisture.
    Store locked up.
    Be sure not to give the container unexpected impacts, such as falling down or falling
    off.
    Store away from incompatible materials such as oxidizing agents.
    Heat-sensitive, Hygroscopic
  Packaging material:        Comply with laws.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust. Also install safety shower and eye bath.    
  Personal protective equipment
  Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator,
    etc. Use respirators approved under appropriate government standards and follow
    local and national regulations.
  Hand protection:        Impervious gloves.    
  Eye protection:        Safety goggles. A face-shield, if the situation requires.    
  Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Solid    
  Form:        Crystal- Powder    
  Colour:        White - Slightly pale yellow    
  Odour:        No data available    
  pH: No data available
  Melting point/freezing point:85°C
  Boiling point/range:        No data available    
  Flash point:        No data available    
  Flammability or explosive
  limits:
    No data available
  Lower:
  Upper:        No data available    
    No data available
  Relative density:
  Solubility(ies):
  [Water]        Soluble    
  [Other solvents]
  Soluble:        Benzene    
  Tetrabutylammonium Azide

Section 10. STABILITY AND REACTIVITY
  Chemical stability:        Stable under proper conditions.    
  Possibility of hazardous May explosively decompose on heating, shock, friction, etc.
  reactions:
  Conditions to avoid:        Heat, Spark, Open flame, Static discharge, Shock, Friction    
  Incompatible materials: Oxidizing agents, Acids, Metals
  Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx)
  products:

Section 11. TOXICOLOGICAL INFORMATION
    No data available
  Acute Toxicity:
  Skin corrosion/irritation: No data available
    No data available
  Serious eye
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
    No data available
  IARC =
  NTP =        No data available    
    No data available
  Reproductive toxicity:

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
  Fish:        No data available    
  Crustacea:        No data available    
  Algae:        No data available    
  Persistence / degradability: No data available
  Bioaccumulative        No data available    
  potential(BCF):
  Mobility in soil
  Log Pow:        No data available    
  Soil adsorption (Koc):        No data available    
  Henry's Law        No data available    
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities and an expert of disposal. You may be able
    to dissolve or mix material with a combustible solvent and little by little burn in a chemical incinerator equipped with
    an afterburner and scrubber system. If a large amount of the substance is burned at a time, an explosion may
    occur. Observe all federal, state and local regulations when disposing of the substance.

Section 14. TRANSPORT INFORMATION
  Hazards Class:        6.1: Toxic substance.    
  UN-No:        2811    
  Proper shipping name:        Toxic solid, organic, n.o.s.    
  Packing group:        III    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
    loading and unloading were prescribed.
  Tetrabutylammonium Azide


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220