Selleck ChemicalsPurity: 99%Lead Time: 3 Day
Nanjing Caobenyuan Biotechnolo...Purity: 98%Lead Time: 1 Day
Nanjing Zhi Bai Cui Biology Te...Purity: 98%Lead Time: 1 Day
hu bei wei de li hua xue ke ji...Purity: 98.5%Lead Time: 7 Day
Baoji Guokang Bio-Technology C...Purity: 99%Lead Time: 5 Day
|Name:||3-(2-Methoxyphenoxy)-1 2-propanediol 99% Material Safety Data Sheet|
|Synonym:||1,2-Dihydroxy-3-(2-methoxyphenoxy)propane; Glycero-guaiacol ether; Robitussin|
Synonym:1,2-Dihydroxy-3-(2-methoxyphenoxy)propane; Glycero-guaiacol ether; Robitussin
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 22
Section 3 - HAZARDS IDENTIFICATION
Harmful if swallowed.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
May cause eye irritation.
May cause skin irritation. May be harmful if absorbed through the skin.
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. May be harmful if swallowed.
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. May be harmful if inhaled.
No information found.
Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid.
In case of contact, flush skin with plenty of water. Remove contaminated clothing and shoes. Get medical aid if irritation develops and persists. Wash clothing before reuse.
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Use water spray, dry chemical, carbon dioxide, or chemical foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Minimize dust generation and accumulation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use only in a chemical fume hood.
Store in a cool, dry place. Store in a tightly closed container.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 93-14-1: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Powder
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 215 deg C @ 19 mmHg
Freezing/Melting Point: 80-82 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Solubility in water: Soluble.
Molecular Formula: C10H14O4
Molecular Weight: 198.22
Section 10 - STABILITY AND REACTIVITY
Conditions to Avoid:
Dust generation, exposure to moist air or water.
Incompatibilities with Other Materials:
Acid chlorides, acid anhydrides, chloroformates, oxidizing agents, reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 93-14-1: TY8400000 LD50/LC50:
CAS# 93-14-1: Oral, mouse: LD50 = 690 mg/kg; Oral, rabbit: LD50 = 2553 mg/kg; Oral, rat: LD50 = 1510 mg/kg.
3-(2-Methoxyphenoxy)-1,2-propanediol - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Not regulated as a hazardous material.
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
R 22 Harmful if swallowed.
WGK (Water Danger/Protection)
CAS# 93-14-1: No information available.
CAS# 93-14-1 is listed on Canada's DSL List.
CAS# 93-14-1 is not listed on Canada's Ingredient Disclosure List.
CAS# 93-14-1 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION