fentin acetate

CAS No.: 900-95-8
Formula: C20H18O2Sn
Exact Mass: 410.03300
Molecular Weight: 409.05700
PSA: 26.30000
LogP: 2.21660
fentin acetate 900-95-8 MSDS

Section 1: Product Identification
   Chemical Name:       Triphenyltin acetate, 97%    
   CAS Registry Number:       900-95-8    
   Formula:       (C6H5)3SnOOCCH3    
   EINECS Number:       212-984-0    
   Chemical Family:       organotin compound    
   Synonym:       Acetoxytriphenylstannane    

Section 2: Composition and Information on Ingredients
   Ingredient       CAS Number       Percent       ACGIH (TWA)       OSHA (PEL)    
   Title Compound       900-95-8       100%       0.1mg/m3       0.1mg/m3    

Section 3: Hazards Identification
   Organo tin compounds may act as delayed poisons, causing headache, dizziness; psycho-neurologic
   Emergency Overview:
   disturbances; sore throat, vomiting; urine retention; vision impairment; skin burns, liver and kidney damage.
   Primary Routes of Exposure:       Ingestion, inhalation, skin, eyes    
   Eye Contact:       May cause severe irritation of the eyes.    
   May cause slight to mild irritation of the skin. Prolonged contact may dry the skin and lead to rashes or more
   Skin Contact:
   severe irritation.
   May be irritating to the nose, mucous membranes and respiratory tract. May cause long term neurological
   damage. Very toxic by inhalatin.
   Delayed and permanent psycho-neurologic disturbances; impairment of vision, unsteadiness, nausea and
   vomiting. Toxic if swallowed.
   Irritating to skin, eyes and mucous membranes. Ingestion of certain organotin compounds may cause delayed
   Acute Health Affects:
   poisoning (4 days) with cerebral edema causing damage to the central nervous system.
   Repeated exposure to certain organic tin compounds may cause problems with vision, skin, respiratory
   Chronic Health Affects:
   system, central nervous system, liver, kidneys, urinary tract, and blood.
   NTP:       No    
   IARC:       No    
   OSHA:       No    

SECTION 4: First Aid Measures
   Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
   Eye Exposure:
   assistance in keeping their eye lids open. Get immediate medical attention.
   Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
   Skin Exposure:
   irritation persists.
   Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
   in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
   Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
   vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
   Flash Point:       no data    
   Autoignition Temperature:       no data    
   Explosion Limits:       no data    
   Extinguishing Medium:       carbon dioxide or dry powder    
   Fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus
   Special Fire Fighting Procedures:
   and full protective clothing.
   Hazardous Combustion and       carbon monoxide, carbon dioxide, soot, organic fumes and tin compounds.    
   Decomposion Products:
   Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
   Small spills can be mixed with vermiculite, ground limestone, sodium carbonate or other suitable
   Spill and Leak Procedures:
   noncombustible adsorbent and swept up.

SECTION 7: Handling and Storage
   Handling and Storage:       Store in a cool, dry, well ventilated area away from heat and direct sunlight. Keep containers tightly sealed.    

SECTION 8: Exposure Controls and Personal Protection
   Eye Protection:       Always wear approved safety glasses when handling a chemical substance in the laboratory.    
   Skin Protection:       Wear protective clothing and gloves. Consult with glove manufacturer to determine the proper type of glove.    
   Ventilation:       Work with this product in a well-ventilated area, preferably a fume hood.    
   If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
   Protection Program to be in compliance with 29 CFR 1910.134.
   Ventilation:       Work with this product in a well-ventilated area, preferably a fume hood.    
   Additional Protection:       No additional protection required.    

SECTION 9: Physical and Chemical Properties
   Color and Form:       white pwdr.    
   Molecular Weight:       409.05    
   Melting Point:       123°    
   Boiling Point:       no data    
   Vapor Pressure:       no data    
   Specific Gravity:       no data    
   Odor:       not determined    
   Solubility in Water:       insoluble    

SECTION 10: Stability and Reactivity
   Stability:       air and moisture stable    
   Hazardous Polymerization:       no hazardous polymerization    
   Conditions to Avoid:       none    
   Incompatibility:       strong oxidizing agents and halogens    
   Decomposition Products:       carbon monoxide, carbon dioxide, tin oxide, organic fumes.    

SECTION 11: Toxicological Information
   Oral (rat); LD50: 125 mg/kg. Administration onto the skin (rat); LD50: 450 mg/kg. Intraperitoneal (rat); LD50:
   8500 ug/kg. Intravenous (rat); LD50: 18 mg/kg. Oral (mouse); LD50: 81mg/kg. Intraperitoneal (mouse); LD50:
   RTECS Data:       7900ug/kg. Subcutaneous (mouse); LD50: 44mg/kg. Intravenous (mouse); LD50: 18mg/kg. Oral (rabbit);    
   LD50: 30mg/kg. Intraperitoneal (rabbit); LD50: 10mg/kg. Oral (guinea pig); LD50: 21mg/kg. Oral (rat); TDLo:
   320 mg/kg/4W-I. Hamster ovary; Mutation test systems-not otherwise specified: 60 ug/L.
   Carcinogenic Effects:       Tumorigen    
   Mutagenic Effects:       Mutagen    
   Tetratogenic Effects:       Reproductive effector    

SECTION 12: Ecological Information
   Ecological Information:       No information available    

SECTION 13: Disposal Considerations
   Disposal:       Dispose of according to federal, state, and local regulations.    

SECTION 14: Transportation
   Shipping Name (CFR):       Organotin compounds, solid, N.O.S.    
   Hazard Class (CFR):       6.1    
   Additional Hazard Class (CFR):       NA    
   Packaging Group (CFR):       III    
   UN ID Number (CFR):       UN# 3146    
   Shipping Name (IATA):       Organotin compound, solid, N.O.S.    
   Hazard Class (IATA):       6.1    
   Additional Hazard Class (IATA):       NA    
   Packaging Group (IATA):       III    
   UN ID Number (IATA):       UN# 3146    

SECTION 15: Regulatory Information
   TSCA:       Listed in the TSCA inventory.    
   SARA (Title 313):       Title compound not listed.    
   Second Ingredient:       none    


Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220