Recommended Suppliersmore
Dodecylbenzenesulfonyl Azide
CAS No.: 79791-38-1
Synonyms:
Formula: C18H29N3O2S
Exact Mass: 351.19800
Molecular Weight: 351.50700
PSA: 92.27000
LogP: 6.68256
Reference Price: $16,129/ton Inquiry Now
Dodecylbenzenesulfonyl Azide 79791-38-1 MSDS
  Dodecylbenzenesulfonyl Azide (soft type) (mixture)      Revision number: 5    
  SAFETY DATA SHEET

Section 1. IDENTIFICATION
  Product name:        Dodecylbenzenesulfonyl Azide (soft type) (mixture)    
    
  Revision number:        5    

Section 2. HAZARDS IDENTIFICATION
  GHS classification
  PHYSICAL HAZARDS        Not classified    
  HEALTH HAZARDS
  Skin corrosion/irritation        Category 2    
    Category 2A
  Serious eye damage/eye irritation
  ENVIRONMENTAL HAZARDS        Not classified    
  GHS label elements, including precautionary statements
  Pictograms or hazard symbols
  Signal word        Warning    
  Hazard statements        Causes skin irritation    
    Causes serious eye irritation
  Precautionary statements:
    Wash hands thoroughly after handling.
  [Prevention]
    Wear protective gloves/eye protection/face protection.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
  [Response]
    if present and easy to do. Continue rinsing.
    If eye irritation persists: Get medical advice/attention.
    IF ON SKIN: Gently wash with plenty of soap and water.
    If skin irritation occurs: Get medical advice/attention.
    Take off contaminated clothing and wash before reuse.

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Components:        Dodecylbenzenesulfonyl Azide (soft type) (mixture)    
  Percent:        ....    
  CAS Number:        79791-38-1    
  Chemical Formula:        C18H29N3O2S    

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Get medical advice/attention if you feel unwell.
  Dodecylbenzenesulfonyl Azide (soft type)
  (mixture)

Section 4. FIRST AID MEASURES
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. If skin irritation or rash occurs: Get medical advice/attention.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing. If eye irritation persists: Get medical
    advice/attention.
  Ingestion:        Get medical advice/attention if you feel unwell. Rinse mouth.    
    A rescuer should wear personal protective equipment, such as rubber gloves and air-
  Protection of first-aiders:
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, water spray, carbon dioxide.    
  media:
  Specific hazards arising Explosion risk in case of fire. Fight fire remotely due to the risk of explosion.
  from the chemical:        Take care as it may decompose upon combustion or in high temperatures to    
    generate poisonous fume.
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
    spraying with water. Eliminate all ignition sources if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
    Use personal protective equipment. Keep people away from and upwind of spill/leak.
  Personal precautions,
  protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
  emergency procedures: around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
  containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
  up: material should be promptly disposed of, in accordance with appropriate laws and
    regulations.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Be careful not to cause leakage, overflow, or dispersion. Steam should not be
    generated unnecessarily. Keep away from heat/sparks/open flame/hot surfaces. -No
    smoking. Take measures to prevent the build up of electrostatic charge. Use
    explosion-proof equipment. Avoid shock and friction. Wash hands and face before
    breaks and immediately after handling the product.
    Use a ventilation, local exhaust if vapour or aerosol will be generated.
  Advice on safe handling: Avoid contact with skin, eyes and clothing.
  Conditions for safe storage, including any
  incompatibilities
    Keep container tightly closed. Store in a cool and dark place.
  Storage conditions:
    Be sure not to give the container unexpected impacts, such as falling down or falling
    off.
    Store away from incompatible materials such as oxidizing agents.
    Comply with laws.
  Packaging material:

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust as possible so that workers should not be    
    exposed directly. Also install safety shower and eye bath.
  Personal protective equipment
  Respiratory protection: Vapor respirator. Follow local and national regulations.
  Dodecylbenzenesulfonyl Azide (soft type)
  (mixture)

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Hand protection:        Protective gloves.    
  Eye protection:        Safety glasses. A face-shield, if the situation requires.    
  Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Liquid    
  Form:        Clear    
  Colour:        Pale yellow - Reddish yellow    
  Odour:        No data available    
  pH: No data available
  Melting point/freezing point:No data available
  Boiling point/range:        No data available    
  Flash point:        No data available    
  Flammability or explosive
  limits:
  Lower:        No data available    
  Upper:        No data available    
  Relative density:        No data available    
  Solubility(ies):
  [Water]        Insoluble    
  [Other solvents]
  Soluble:        Organic solvents    
  Decomposition        140 °C    
  temperature:

Section 10. STABILITY AND REACTIVITY
  Chemical stability:        Stable under proper conditions.    
  Possibility of hazardous May explosively decompose on heating, shock, friction, etc.
  reactions:
    Heat, Shock, Friction
  Conditions to avoid:
  Incompatible materials: Oxidizing agents, Acids, Bases
  Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx), Sulfur oxides
  products:

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        No data available    
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
  NTP =        No data available    
  Reproductive toxicity:        No data available    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
  Fish:        No data available    
    No data available
  Crustacea:
  Algae:        No data available    
  Persistence / degradability: No data available
  Bioaccumulative        No data available    
  potential(BCF):
  Mobility in soil
    No data available
  Log Pow:
  Soil adsorption (Koc):        No data available    
  Dodecylbenzenesulfonyl Azide (soft type)
  (mixture)

Section 12. ECOLOGICAL INFORMATION
  Henry's Law        No data available    
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities and an expert of disposal. You may be able
    to dissolve or mix material with a combustible solvent and little by little burn in a chemical incinerator equipped with
    an afterburner and scrubber system. If a large amount of the substance is burned at a time, an explosion may
    occur. Observe all federal, state and local regulations when disposing of the substance.

Section 14. TRANSPORT INFORMATION
  Hazards Class:        Does not correspond to the classification standard of the United Nations    
  UN-No:        Not listed    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
    loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220