Wuhan Jadechem International T...Purity: 96%Lead Time: -
Nanjing Caobenyuan Biotechnolo...Purity: 56%Lead Time: 1 Day
Nanjing Zhi Bai Cui Biology Te...Purity: 56%Lead Time: -
mian yang shi shen long zhong ...Purity: 94%Lead Time: 7 Day
si chuan lan jian hua gong ji...Purity: 94%Lead Time: 3 Day
|Name:||Sodium Tripolyphosphate Tech. 85% Material Safety Data Sheet|
|Synonym:||Sodium Triphosphate; Sodium Tripolyphosphate|
Synonym:Sodium Triphosphate; Sodium Tripolyphosphate
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 36/37/38
Section 3 - HAZARDS IDENTIFICATION
Irritating to eyes, respiratory system and skin.Hygroscopic (absorbs moisture from the air).
Potential Health Effects
Causes eye irritation. May cause chemical conjunctivitis.
Causes skin irritation.
May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Can produce delayed pulmonary edema.
Effects may be delayed.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation. Wash clothing before reuse.
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 7758-29-4: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
pH: 9.7-9.8 @ 1% soln.
Vapor Pressure: Not applicable.
Viscosity: Not applicable.
Boiling Point: Not applicable.
Freezing/Melting Point: 1152F decomposes.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 1152 deg F
Solubility in water: 20% @ 25C
Specific Gravity/Density: >1.5
Molecular Formula: Na5P3O10
Molecular Weight: 367.8644
Section 10 - STABILITY AND REACTIVITY
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, exposure to air, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, strong oxidizing agents.
Hazardous Decomposition Products:
Oxides of phosphorus, irritating and toxic fumes and gases, toxic fumes of sodium oxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 7758-29-4: YK4570000 LD50/LC50:
CAS# 7758-29-4: Draize test, rabbit, skin: 500 mg/24H Moderate; Oral, mouse: LD50 = 3100 mg/kg; Oral, rat: LD50 = 3120 mg/kg; Skin, rabbit: LD50 = >4640 mg/kg.
Pentasodium Triphosphate - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Shipping Name: Not regulated.
USA RQ: CAS# 7758-29-4: 5000 lb final RQ (Listed under Sodium phosphate, tribasi
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
R 36/37/38 Irritating to eyes, respiratory system
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
WGK (Water Danger/Protection)
CAS# 7758-29-4: 1
CAS# 7758-29-4 is listed on Canada's DSL List.
CAS# 7758-29-4 is not listed on Canada's Ingredient Disclosure List.
CAS# 7758-29-4 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION