Recommended Suppliersmore
dichloromethane 75-09-2 MSDS

SECTION 1: Identification of the substance/mixture and of the company/undertaking
  Product identifiers
    Product name        : Dichloromethane    
    REACH No.        : 01-2119480404-41-XXXX    
    CAS-No.        : 75-09-2    
  Relevant identified uses of the substance or mixture and uses advised against
    Identified uses        : Laboratory chemicals, Manufacture of substances    

SECTION 2: Hazards identification
  Classification of the substance or mixture
  Classification according to Regulation (EC) No 1272/2008
    Skin irritation (Category 2), H315
    Eye irritation (Category 2), H319
    Carcinogenicity (Category 2), H351
    Specific target organ toxicity - single exposure (Category 3), Respiratory system, Central nervous system,
    H335, H336
    Specific target organ toxicity - repeated exposure (Category 2), H373
    For the full text of the H-Statements mentioned in this Section, see Section 16.
  Classification according to EU Directives 67/548/EEC or 1999/45/EC
    R36/37/38, R67
    For the full text of the R-phrases mentioned in this Section, see Section 16.
  Label elements
  Labelling according Regulation (EC) No 1272/2008
    Signal word        Warning    
    Hazard statement(s)
    H315        Causes skin irritation.    
    H319        Causes serious eye irritation.    
    H335        May cause respiratory irritation.    
    H336        May cause drowsiness or dizziness.    
    H351        Suspected of causing cancer.    
    H373        May cause damage to organs through prolonged or repeated exposure.    
    Precautionary statement(s)
    P261        Avoid breathing vapours.    
    P281        Use personal protective equipment as required.    
    P305 + P351 + P338        IF IN EYES: Rinse cautiously with water for several minutes. Remove    
    contact lenses, if present and easy to do. Continue rinsing.
    Supplemental Hazard        none    
  Other hazards - none

SECTION 3: Composition/information on ingredients
    Synonyms        : Methylene chloride    
    Formula        : CH2Cl2 CH2Cl2    
    Molecular Weight        : 84,93 g/mol    
    CAS-No.        : 75-09-2    
    EC-No.        : 200-838-9    
    Registration number        : 01-2119480404-41-XXXX    
  Hazardous ingredients according to Regulation (EC) No 1272/2008
    Component        Classification        Concentration    
  Methylene chloride
    CAS-No.        75-09-2        Skin Irrit. 2; Eye Irrit. 2; Carc.        <= 100 %    
    EC-No.        200-838-9        2; STOT SE 3; STOT RE 2;    
    Index-No.        602-004-00-3        H315, H319, H335, H336,    
    H351, H373, H373
  Hazardous ingredients according to Directive 1999/45/EC
    Component        Classification        Concentration    
  Methylene chloride
    CAS-No.        75-09-2        Xn, Carc.Cat.3, Xi, R36/37/38 <= 100 %    
    EC-No.        200-838-9        - R40 - R67    
    Index-No.        602-004-00-3    
    For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
  Description of first aid measures
  General advice
    Consult a physician. Show this safety data sheet to the doctor in attendance.
  If inhaled
    If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
  In case of skin contact
    Wash off with soap and plenty of water. Consult a physician.
  In case of eye contact
    Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
  If swallowed
    Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
  Most important symptoms and effects, both acute and delayed
    The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
    section 11
  Indication of any immediate medical attention and special treatment needed
    no data available

SECTION 5: Firefighting measures
  Extinguishing media
  Suitable extinguishing media
    Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
  Special hazards arising from the substance or mixture
    Carbon oxides, Hydrogen chloride gas
  Advice for firefighters
    Wear self contained breathing apparatus for fire fighting if necessary.
  Further information
    no data available

SECTION 6: Accidental release measures
  Personal precautions, protective equipment and emergency procedures
    Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
    Evacuate personnel to safe areas.
    For personal protection see section 8.
  Environmental precautions
    Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
  Methods and materials for containment and cleaning up
    Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
    containers for disposal.
  Reference to other sections
    For disposal see section 13.

SECTION 7: Handling and storage
  Precautions for safe handling
    Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
    For precautions see section 2.2.
  Conditions for safe storage, including any incompatibilities
    Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
    opened must be carefully resealed and kept upright to prevent leakage.
    Heat sensitive. Store under inert gas.
  Specific end use(s)
    A part from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
  Control parameters
  Components with workplace control parameters
  Exposure controls
  Appropriate engineering controls
    Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
    at the end of workday.
  Personal protective equipment
  Eye/face protection
    Face shield and safety glasses Use equipment for eye protection tested and approved under
    appropriate government standards such as NIOSH (US) or EN 166(EU).
  Skin protection
    Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
    (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
    contaminated gloves after use in accordance with applicable laws and good laboratory practices.
    Wash and dry hands.
    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
    the standard EN 374 derived from it.
    Splash contact
    Material: Fluorinated rubber
    Minimum layer thickness: 0,7 mm
    Break through time: 148 min
    Material tested:Vitoject® (KCL 890 / Z677698, Size M)
    data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300,     test method: EN374
    If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
    contact the supplier of the CE approved gloves. This recommendation is advisory only and must
    be evaluated by an industrial hygienist and safety officer familiar with the specific situation of
    anticipated use by our customers. It should not be construed as offering an approval for any
    specific use scenario.
  Body Protection
    Complete suit protecting against chemicals, The type of protective equipment must be selected
    according to the concentration and amount of the dangerous substance at the specific workplace.
  Respiratory protection
    Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
    with multi-purpose combination (US) or type AXBEK (EN 14387) respirator cartridges as a backup
    to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
    respirator. Use respirators and components tested and approved under appropriate government
    standards such as NIOSH (US) or CEN (EU).
  Control of environmental exposure
    Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

SECTION 9: Physical and chemical properties
  Information on basic physical and chemical properties
    a) Appearance        Form: liquid    
    Colour: colourless
    b) Odour        no data available    
    c) Odour Threshold        no data available    
    d) pH        no data available    
    e) Melting point/freezing        Melting point/range: -97 °C - lit.    
    f) Initial boiling point and 39,8 - 40 °C - lit.
    boiling range
    g) Flash point        no data available    
    h) Evapouration rate        0,71    
    i) Flammability (solid, gas) no data available
    j) Upper/lower        Upper explosion limit: 19 %(V)    
    flammability or        Lower explosion limit: 12 %(V)    
    explosive limits
    k) Vapour pressure        470,9 hPa at 20,0 °C    
    l) Vapour density        2,93 - (Air = 1.0)    
    m) Relative density        1,325 g/cm3 at 25 °C    
    n) Water solubility        slightly soluble    
    o) Partition coefficient: n- log Pow: 1,25
    p) Auto-ignition        556,1 °C    
    temperature        662,0 °C    
    q) Decomposition        no data available    
    r) Viscosity        no data available    
    s) Explosive properties        no data available    
    t) Oxidizing properties        no data available    
  Other safety information
    Relative vapour density 2,93 - (Air = 1.0)

SECTION 10: Stability and reactivity
    no data available
  Chemical stability
    Stable under recommended storage conditions.
    Contains the following stabiliser(s):
    2-Methyl-2-butene (0,005 %)
  Possibility of hazardous reactions
    no data available
  Conditions to avoid
    Heat, flames and sparks. Exposure to sunlight.
  Incompatible materials
    Alkali metals, Aluminum, Strong oxidizing agents, Bases, Amines, Magnesium, Strong acids and strong
    bases, Vinyl compounds
  Hazardous decomposition products
    Other decomposition products - no data available
    In the event of fire: see section 5

SECTION 11: Toxicological information
  Information on toxicological effects
  Acute toxicity
    LD50 Oral - rat - > 2.000 mg/kg
    LC50 Inhalation - rat - 52.000 mg/m3
    LD50 Dermal - rat - > 2.000 mg/kg
    (OECD Test Guideline 402)
  Skin corrosion/irritation
    Skin - rabbit
    Result: Irritating to skin. - 24 h
    (Draize Test)
  Serious eye damage/eye irritation
    Eyes - rabbit
    Result: Irritating to eyes. - 24 h
    (Draize Test)
  Respiratory or skin sensitisation
    no data available
  Germ cell mutagenicity
    DNA damage
    Carcinogenicity - rat - Inhalation
    Tumorigenic:Carcinogenic by RTECS criteria. Endocrine:Tumors.
    Limited evidence of carcinogenicity in animal studies
    Suspected human carcinogens
    IARC:        2B - Group 2B: Possibly carcinogenic to humans (Methylene chloride)    
  Reproductive toxicity
    no data available
  Specific target organ toxicity - single exposure
    May cause respiratory irritation.
    May cause drowsiness or dizziness.
  Specific target organ toxicity - repeated exposure
    Inhalation - May cause damage to organs through prolonged or repeated exposure. - Central nervous
    Oral - May cause damage to organs through prolonged or repeated exposure. - Liver, Blood
  Aspiration hazard
    no data available
  Additional Information
    RTECS: PA8050000
    Dichloromethane is metabolized in the body producing carbon monoxide which increases and sustains
    carboxyhemoglobin levels in the blood, reducing the oxygen-carrying capacity of the blood., Acts as a
    simple asphyxiant by displacing air., anesthetic effects, Difficulty in breathing, Headache, Dizziness,
    Prolonged or repeated contact with skin may cause:, defatting, Dermatitis, Contact with eyes can cause:,
    Redness, Blurred vision, Provokes tears., Effects due to ingestion may include:, Gastrointestinal
    discomfort, Central nervous system depression, Paresthesia., Drowsiness, Convulsions, Conjunctivitis.,
    Pulmonary edema. Effects may be delayed., Irregular breathing., Stomach/intestinal disorders, Nausea,
    Vomiting, Increased liver enzymes., Weakness, Heavy or prolonged skin exposure may result in the
    absorption of harmful amounts of material., Abdominal pain

SECTION 12: Ecological information
    Toxicity to fish        LC50 - Pimephales promelas (fathead minnow) - 193,00 mg/l - 96 h    
    NOEC - Cyprinodon variegatus (sheepshead minnow) - 130 mg/l - 96 h
    Toxicity to daphnia and EC50 - Daphnia magna (Water flea) - 1.682,00 mg/l - 48 h
    other aquatic
  Persistence and degradability
    no data available
  Bioaccumulative potential
    no data available
  Mobility in soil
    no data available
  Results of PBT and vPvB assessment
    PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
  Other adverse effects

SECTION 13: Disposal considerations
  Waste treatment methods
    Offer surplus and non-recyclable solutions to a licensed disposal company.
  Contaminated packaging
    Dispose of as unused product.

SECTION 14: Transport information
  UN number
    ADR/RID: 1593        IMDG: 1593        IATA: 1593    
  UN proper shipping name
    IATA:        Dichloromethane    
  Transport hazard class(es)
    ADR/RID: 6.1        IMDG: 6.1        IATA: 6.1    
  Packaging group
    ADR/RID: III        IMDG: III        IATA: III    
  Environmental hazards
    ADR/RID: no        IMDG Marine pollutant: no        IATA: no    
  Special precautions for user
    no data available



Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220