Recommended Suppliersmore
tetrakis(prop-2-enyl)stannane 7393-43-3 MSDS
  Tetraallyltin      Revision number: 5    
  SAFETY DATA SHEET

Section 1. IDENTIFICATION
  Product name:        Tetraallyltin    
    
  Revision number:        5    

Section 2. HAZARDS IDENTIFICATION
  GHS classification
  PHYSICAL HAZARDS
    Category 4
  Flammable liquids
  HEALTH HAZARDS
    Category 3
  Acute toxicity (Oral)
  Acute toxicity (Dermal)        Category 3    
    Category 3
  Acute toxicity (Inhalation)
  ENVIRONMENTAL HAZARDS        Not classified    
  GHS label elements, including precautionary statements
  Pictograms or hazard symbols
  Signal word        Danger    
  Hazard statements        Combustible liquid    
    Toxic if swallowed, in contact with skin or if inhaled
  Precautionary statements:
    Keep away from flames and hot surfaces.
  [Prevention]
    Avoid breathing dust/fume/gas/mist/vapours/spray.
    Use only outdoors or in a well-ventilated area.
    Do not eat, drink or smoke when using this product.
    Wash hands thoroughly after handling.
    Wear protective gloves and eye/face protection.
    IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
  [Response]
    breathing. Call a POISON CENTER or doctor/physician.
    IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Rinse
    mouth.
    IF ON SKIN: Gently wash with plenty of soap and water.
    Remove/Take off immediately all contaminated clothing.
    Wash contaminated clothing before reuse.
    Call a POISON CENTER or doctor/physician if you feel unwell.
  [Storage]        Store in a well-ventilated place. Keep container tightly closed.    
    Store locked up.
  [Disposal]        Dispose of contents/container through a waste management company authorized by    
    the local government.
  Tetraallyltin

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Components:        Tetraallyltin    
  Percent:        >97.0%(GC)    
  CAS Number:        7393-43-3    
  Chemical Formula:        C12H20Sn    

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Call a POISON CENTER or doctor/physician.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. Call a POISON CENTER or doctor/physician.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing. If eye irritation persists: Get medical
    advice/attention.
  Ingestion:        Immediately call a POISON CENTER or doctor/physician. Rinse mouth.    
    A rescuer should wear personal protective equipment, such as rubber gloves and air-
  Protection of first-aiders:
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, water spray, carbon dioxide.    
  media:
  Unsuitable extinguishing Solid streams of water
  media:
  Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
  from the chemical:        generate poisonous fume.    
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Remove movable
    containers if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions,        Use extra personal protective equipment (self-contained breathing apparatus). Keep    
  protective equipment and people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-
  emergency procedures: involved personnel should be controlled around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
  containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
  up: material should be promptly disposed of, in accordance with appropriate laws and
    regulations.
  Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
  hazards:        case of a fire. Use spark-proof tools and explosion-proof equipment.    

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent generation of vapour or mist. Keep away from flames and hot surfaces. Take
    measures to prevent the build up of electrostatic charge. Use explosion-proof
    equipment. Wash hands and face thoroughly after handling.
    Use a closed system, ventilation.
  Advice on safe handling: Avoid contact with skin, eyes and clothing.
  Conditions for safe storage, including any
  incompatibilities
  Storage conditions:        Keep container tightly closed. Store in a cool, dark and well-ventilated place.    
  Tetraallyltin

Section 7. HANDLING AND STORAGE
    Store under inert gas.
    Store locked up.
    Store away from incompatible materials such as oxidizing agents.
    Air-sensitive
  Packaging material:        Comply with laws.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust. Also install safety shower and eye bath.    
  Exposure limits:
    0.1 mg(Sn)/m3 (skin)
  ACGIH TLV(TWA):
    0.2 mg(Sn)/m3 (skin)
  ACGIH TLV(STEL):
    0.1 mg(Sn)/m3
  OSHA PEL(TWA):
  Personal protective equipment
  Respiratory protection: Half or full facepiece respirator, self-contained breathing apparatus(SCBA), supplied
    air respirator, etc. Use respirators approved under appropriate government standards
    and follow local and national regulations.
    Impervious gloves.
  Hand protection:
  Eye protection:        Safety goggles. A face-shield, if the situation requires.    
  Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Liquid    
  Form:        Clear    
    Colorless - Slightly pale yellow
  Colour:
  Odour:        No data available    
  pH: No data available
  Melting point/freezing point:No data available
    70°C/0.2kPa
  Boiling point/range:
  Flash point:        75°C    
  Flammability or explosive
  limits:
    No data available
  Lower:
  Upper:        No data available    
    1.19
  Relative density:
  Solubility(ies):
    No data available
  [Water]
  [Other solvents]        No data available    

Section 10. STABILITY AND REACTIVITY
  Chemical stability:        Stable under proper conditions.    
  Possibility of hazardous No special reactivity has been reported.
  reactions:
  Conditions to avoid:        Open flame    
  Incompatible materials: Oxidizing agents
  Hazardous decomposition Carbon monoxide, Carbon dioxide, Tin oxides
  products:

Section 11. TOXICOLOGICAL INFORMATION
    No data available
  Acute Toxicity:
  Skin corrosion/irritation: No data available
    No data available
  Serious eye
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
    No data available
  IARC =
  NTP =        No data available    
  Tetraallyltin

Section 11. TOXICOLOGICAL INFORMATION
  Reproductive toxicity:        No data available    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
  Fish:        No data available    
  Crustacea:        No data available    
  Algae:        No data available    
  Persistence / degradability: No data available
    No data available
  Bioaccumulative
  potential(BCF):
  Mobility in soil
  Log Pow:        No data available    
  Soil adsorption (Koc):        No data available    
  Henry's Law        No data available    
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
    incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
    disposing of the substance.

Section 14. TRANSPORT INFORMATION
  Hazards Class:        6.1: Toxic substance.    
  UN-No:        2788    
  Proper shipping name:        Organotin compound, liquid, n.o.s.    
  Packing group:        III    
  Marine pollutant        Y    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
    loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220