Xinxiang Aurora Biotechnology ...Purity: 98%Lead Time: 7 Day
Hunan Yunbang Biomedical Co.,L...Purity: 98%Lead Time: 14 Day
yi chang shi yong nuo yao ye y...Purity: 99%Lead Time: 7 Day
shandong xiya chemical technol...Purity: 99%Lead Time: -
Zhu Hai Shuangbojie Tech.LTD.CPurity: 99%Lead Time: 3 Day
|Name:||Ampicillin Sodium Salt Material Safety Data Sheet|
|Synonym:||Alpen-N; Amcill-S; D-Alpha-aminobenxylpenicillin sodium salt; Ampicillin sodium sal|
Synonym:Alpen-N; Amcill-S; D-Alpha-aminobenxylpenicillin sodium salt; Ampicillin sodium sal
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 36/37/38 42/43
Section 3 - HAZARDS IDENTIFICATION
Irritating to eyes, respiratory system and skin. May cause sensitization by inhalation and skin contact.
Potential Health Effects
Causes eye irritation.
Causes skin irritation. May cause skin sensitization, an allergic reaction, which becomes evident upon re-exposure to this material.
May be harmful if absorbed through the skin.
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May be harmful if swallowed.
Causes respiratory tract irritation. May cause allergic respiratory reaction. May be harmful if inhaled.
No information found.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid.
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with skin and eyes. Keep container tightly closed. Avoid ingestion and inhalation.
Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 69-52-3: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: white to off-white
Odor: none reported
pH: 8.0-10.0 @ 1% solu.
Vapor Pressure: Not applicable.
Viscosity: Not applicable.
Boiling Point: Not available.
Freezing/Melting Point: 419 deg F
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Very soluble in water.
Specific Gravity/Density: Not available.
Molecular Formula: C16H18N3O4SNa
Molecular Weight: 371.1935
Section 10 - STABILITY AND REACTIVITY
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, incompatible materials, dust generation, moisture.
Incompatibilities with Other Materials:
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 69-52-3: XH8400000 LD50/LC50:
CAS# 69-52-3: Oral, mouse: LD50 = >5314 mg/kg; Oral, rat: LD50 = >5314 mg/kg.
Ampicillin Sodium - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Other No information available.
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
R 36/37/38 Irritating to eyes, respiratory system
R 42/43 May cause sensitization by inhalation and
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 69-52-3: No information available.
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 69-52-3 is not listed on Canada's Ingredient Disclosure List.
CAS# 69-52-3 is not listed on the TSCA inventory.
It is for research and development use only.
SECTION 16 - ADDITIONAL INFORMATION