Recommended Suppliersmore
Hexafluoroglutaryl chloride
CAS No.: 678-77-3
Synonyms:
Formula: C5Cl2F6O2
Exact Mass: 275.91800
Molecular Weight: 276.94900
PSA: 34.14000
LogP: 2.42310
Reference Price: $2,868/kg Inquiry Now
Hexafluoroglutaryl chloride 678-77-3 MSDS

Section I.Chemical Product and Company Identification
    Chemical Name 2,2,3,3,4,4-Hexafluoropentanedioyl Dichloride
    Portland OR
    Pentanedioyl dichloride, hexafluoro- (9CI)
    Synonym
    ClCO(CF2)3COCl
    Chemical Formula
    CAS Number        678-77-3    

Section II.        Composition and Information on Ingredients    
    Chemical Name        CAS Number Percent (%)        TLV/PEL        Toxicology Data    
    2,2,3,3,4,4-Hexafluoropentanedioyl Dichloride        678-77-3        Min. Not available.        Not available.    
    98.0%(GC)

Section III. Hazards Identification
    Acute Health Effects        Corrosive to skin, eyes, and respiratory system. Liquid or spray mist may produce tissue damage, particularly in mucous    
    membranes of the eyes, mouth and respiratory tract. Skin contact may produce burns. Eye contact can result in corneal
    damage or blindness. Inhalation of the spray mist may produce severe irritation of respiratory tract, characterized by
    coughing, choking, or shortness of breath. Corrosive materials may cause serious injury if ingested.
    Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.
    Chronic Health Effects        CARCINOGENIC EFFECTS : Not available.    
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    DEVELOPMENTAL TOXICITY: Not available.
    Repeated or prolonged contact with spray mist may produce chronic eye irritation and severe skin irritation. Repeated or
    prolonged exposure to spray mist may produce respiratory tract irritation leading to frequent attacks of bronchial
    infection.

Section IV.        First Aid Measures    
    Eye Contact        Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15    
    minutes. Get medical attention.
    Skin Contact        In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing    
    before reuse. Thoroughly clean shoes before reuse. Get medical attention.
    Inhalation        If the victim is not breathing, perform mouth-to-mouth resuscitation. Loosen tight clothing such as a collar, tie, belt or    
    waistband. If breathing is difficult, oxygen can be administered. Seek medical attention if respiration problems do not
    improve.
    Ingestion        DO NOT INDUCE VOMITING. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing,    
    perform mouth-to-mouth resuscitation. Examine the lips and mouth to ascertain whether the tissues are damaged, a
    possible indication that the toxic material was ingested; the absence of such signs, however, is not conclusive.

Section V.        Fire and Explosion Data    
    Auto-Ignition        Not available.    
    Flammability        May be combustible at high temperature.    
    Flash Points        Flammable Limits        Not available.    
    Not available.
    Combustion Products        These products include toxic carbon oxides (CO,CO2), halogenated compounds.    
    WARNING: Highly toxic HCl gas is produced during combustion.
    WARNING: Highly toxic HF gas is produced during combustion.
    Fire Hazards
    Not available.
    Risks of explosion of the product in presence of mechanical impact: Not available.
    Explosion Hazards
    Risks of explosion of the product in presence of static discharge: Not available.
    Fire Fighting Media
    SMALL FIRE: Use DRY chemical powder.
    LARGE FIRE: Use water spray, fog or foam. DO NOT use water jet.
    and Instructions
    Consult with local fire authorities before attempting large scale fire-fighting operations.
    Continued on Next Page
    2,2,3,3,4,4-Hexafluoropentanedioyl Dichloride

Section VI.        Accidental Release Measures    
    Spill Cleanup        Corrosive Material. Reacts Violently with Water.    
    Stop leak if without risk. Absorb with DRY earth, sand or other non-combustible material. DO NOT get water inside
    Instructions
    container. DO NOT touch spilled material. Use water spray curtain to divert vapor drift. Prevent entry into sewers,
    basements or confined areas; dike if needed. Eliminate all sources of ignition. Consult federal, state, and/or local
    authorities for assistance on disposal.

Section VII. Handling and Storage
    CORROSIVE. REACTS VIOLENTLY WITH WATER. STORE UNDER NITROGEN. Keep container dry. Keep away
    Handling and Storage
    from heat. Mechanical exhaust required. When not in use, tightly seal the container and store in a dry, cool place. Avoid
    Information
    excessive heat and light. Do not breathe gas/fumes/ vapor/spray. Never add water to this product. Wear suitable
    protective clothing. If you feel unwell, seek medical attention and show the label when possible. Treat symptomatically
    and supportively.
    Always store away from incompatible compounds such as oxidizing agents, moisture.

Section VIII. Exposure Controls/Personal Protection
    Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their
    Engineering Controls
    respective threshold limit value. Ensure that eyewash station and safety shower is proximal to the work-station location.
    Face shield. Lab coat. Vapor respirator. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a
    Personal Protection
    specialist BEFORE handling this product. Be sure to use a MSHA/NIOSH approved respirator or equivalent.
    Exposure Limits        Not available.    

Section IX. Physical and Chemical Properties
    Physical state @ 20°C        Liquid. (Clear, Colorless.)        Solubility        Not available.    
    1.64 (water=1)
    Specific Gravity
    Molecular Weight        276.95        Partition Coefficient        Not available.    
    Boiling Point        110°C (230°F)        Vapor Pressure        Not available.    
    Not available.        Not available.    
    Melting Point        Vapor Density    
    1.353 to 1.355        Not available.    
    Refractive Index        Volatility    
    Not available.
    Critical Temperature        Not available.        Odor    
    Not available.        Not available.    
    Viscosity        Taste    

Section X.        Stability and Reactivity Data    

This material is stable if stored under proper conditions. (See Section VII for instructions)
    Stability
    Conditions of Instability
    Avoid excessive heat and light.
    Incompatibilities
    Reactive with oxidizing agents, moisture.

Section XI. Toxicological Information
    RTECS Number        Not available.    
    Routes of Exposure        Eye Contact. Ingestion. Inhalation. Skin contact.    
    Not available.
    Toxicity Data
    CARCINOGENIC EFFECTS : Not available.
    Chronic Toxic Effects
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    DEVELOPMENTAL TOXICITY: Not available.
    Repeated or prolonged contact with spray mist may produce chronic eye irritation and severe skin irritation. Repeated or
    prolonged exposure to spray mist may produce respiratory tract irritation leading to frequent attacks of bronchial infection.
    Acute Toxic Effects        Corrosive to skin, eyes, and respiratory system. Liquid or spray mist may produce tissue damage, particularly in mucous    
    membranes of the eyes, mouth and respiratory tract. Skin contact may produce burns. Eye contact can result in corneal
    damage or blindness. Inhalation of the spray mist may produce severe irritation of respiratory tract, characterized by
    coughing, choking, or shortness of breath. Corrosive materials may cause serious injury if ingested.
    Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.
    Continued on Next Page
    2,2,3,3,4,4-Hexafluoropentanedioyl Dichloride

Section XII.        Ecological Information    
    Ecotoxicity        Not available.    
    Not available.
    Environmental Fate

Section XIII. Disposal Considerations
    Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a
    Waste Disposal
    combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all
    federal, state and local regulations when disposing of the substance.

Section XIV. Transport Information
    DOT Classification        DOT Class 8: Corrosive material.    
    PIN Number
    Proper Shipping Name
    Corrosive liquid, acidic, organic, n.o.s.
    Packing Group (PG)        III    
    DOT Pictograms

Section XV. Other Regulatory Information and Pictograms
    TSCA Chemical Inventory        This compound is ON the EPA Toxic Substances Control Act (TSCA) inventory list.    
    (EPA)
    WHMIS Classification        CLASS E: Corrosive liquid.    
    On NDSL.
    (Canada)
    EINECS Number (EEC)        211-651-7    
    EEC Risk Statements
    R14- Reacts violently with water.
    R34- Causes burns.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220