Recommended Suppliersmore
DL-Isoproterenol sulfate dihydrate
CAS No.: 6700-39-6
Formula: C22H40N2O12S
Exact Mass: 556.23000
Molecular Weight: 556.62400
PSA: 246.88000
LogP: 3.33960
Reference Price: $966/kg Inquiry Now
DL-Isoproterenol sulfate dihydrate 6700-39-6 MSDS

Section 1. Chemical Product and Company Identification
    Isoproterenol sulfate        Catalog    
    Common Name/
    Trade Name
    CAS#        6700-39-6    
    RTECS        Not available.    
    TSCA        TSCA 8(b) inventory: No    
    products were found.
    Commercial Name(s)        Not available.    
    CI# Not available.
    Synonym        4-[1-Hydroxy-2-[(1-methylethyl)amino]ethyl]-111,2-benzenediol sulfate    
    Not available.
    Chemical Name
    Chemical Family        Not available.        CALL (310) 516-8000    
    Chemical Formula

Section 2.Composition and Information on Ingredients
    Exposure Limits
    TWA (mg/m3)        STEL (mg/m3) CEIL (mg/m3)    
    Name        CAS #        % by Weight    
    1) Isoproterenol sulfate        6700-39-6        100    
    Toxicological Data        Isoproterenol sulfate    
    on Ingredients        LD50: Not available.    
    LC50: Not available.

Section 3. Hazards Identification
    Potential Acute Health Effects Very hazardous in case of ingestion. Hazardous in case of skin contact (irritant, permeator), of eye contact
    (irritant). Slightly hazardous in case of inhalation.
    Potential Chronic Health        CARCINOGENIC EFFECTS: Not available.    
    Effects        MUTAGENIC EFFECTS: Not available.    
    TERATOGENIC EFFECTS: Not available.
    The substance is toxic to lungs, mucous membranes.
    Repeated or prolonged exposure to the substance can produce target organs damage.
    Isoproterenol sulfate

Section 4. First Aid Measures
    Eye Contact        Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes,    
    keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical attention.
    Skin Contact        After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin    
    with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin.
    Cold water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention.
    Wash contaminated clothing before reusing.
    Serious Skin Contact        Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical    
    Inhalation        Allow the victim to rest in a well ventilated area. Seek immediate medical attention.    
    Serious Inhalation        Not available.    
    Ingestion        Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not    
    breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
    Serious Ingestion        Not available.    

Section 5. Fire and Explosion Data
    Flammability of the Product May be combustible at high temperature.
    Auto-Ignition Temperature Not available.
    Flash Points        Not available.    
    Flammable Limits        Not available.    
    These products are carbon oxides (CO, CO2), nitrogen oxides (NO, NO2...), sulfur oxides (SO2, SO3...).
    Products of Combustion
    Fire Hazards in Presence of Not available.
    Various Substances
    Explosion Hazards in Presence Risks of explosion of the product in presence of mechanical impact: Not available.
    of Various Substances        Risks of explosion of the product in presence of static discharge: Not available.    
    Fire Fighting Media        SMALL FIRE: Use DRY chemical powder.    
    and Instructions        LARGE FIRE: Use water spray, fog or foam. Do not use water jet.    
    Special Remarks on        Not available.    
    Fire Hazards
    Special Remarks on Explosion Not available.

Section 6. Accidental Release Measures
    Small Spill        Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by    
    spreading water on the contaminated surface and dispose of according to local and regional authority
    Large Spill
    Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water
    on the contaminated surface and allow to evacuate through the sanitary system.
    Isoproterenol sulfate

Section 7. Handling and Storage
    Precautions        Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the    
    residue under a fume hood. Ground all equipment containing material. Do not breathe dust. Wear suitable
    protective clothing If you feel unwell, seek medical attention and show the label when possible. Avoid contact
    with skin and eyes
    Storage        Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly    
    closed. Keep in a cool, well-ventilated place. Combustible materials should be stored away from extreme heat
    and away from strong oxidizing agents.

Section 8. Exposure Controls/Personal Protection
    Engineering Controls        Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below    
    recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
    airborne contaminants below the exposure limit.
    Personal Protection        Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent.    
    Personal Protection in Case of Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used
    a Large Spill        to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist    
    BEFORE handling this product.
    Exposure Limits        Not available.    

Section 9. Physical and Chemical Properties
    Physical state and appearance Solid. (Solid crystalline powder.)        Odor        Odorless.    
    Taste        Not available.    
    556.62 g/mole
    Molecular Weight
    Color        White.    
    pH (1% soln/water)        5 [Acidic.]    
    Boiling Point        Decomposes.    
    Melting Point        128°C (262.4°F)    
    Critical Temperature        Not available.    
    Specific Gravity        Not available.    
    Not applicable.
    Vapor Pressure
    Vapor Density        Not available.    
    Volatility        Not available.    
    Odor Threshold        Not available.    
    Water/Oil Dist. Coeff.        Not available.    
    Not available.
    Ionicity (in Water)
    Dispersion Properties        See solubility in water.    
    Soluble in cold water.

Section 10. Stability and Reactivity Data
    The product is stable.
    Instability Temperature        Not available.    
    Not available.
    Conditions of Instability
    Incompatibility with various Not available.
    Isoproterenol sulfate
    Corrosivity        Non-corrosive in presence of glass.    
    Special Remarks on        Not available.    
    Special Remarks on        Not available.    
    Polymerization        No.    

Section 11. Toxicological Information
    Routes of Entry        Dermal contact. Eye contact. Ingestion.    
    Toxicity to Animals        LD50: Not available.    
    LC50: Not available.
    Chronic Effects on Humans The substance is toxic to lungs, mucous membranes.
    Other Toxic Effects on        Very hazardous in case of ingestion.    
    Humans        Hazardous in case of skin contact (irritant, permeator).    
    Slightly hazardous in case of inhalation.
    Special Remarks on        Not available.    
    Toxicity to Animals
    Special Remarks on        Not available.    
    Chronic Effects on Humans
    Special Remarks on other        Not available.    
    Toxic Effects on Humans

Section 12. Ecological Information
    Not available.
    Not available.
    BOD5 and COD
    Products of Biodegradation        Possibly hazardous short term degradation products are not likely. However, long term degradation products may    
    Toxicity of the Products        The products of degradation are more toxic.    
    of Biodegradation
    Not available.
    Special Remarks on the
    Products of Biodegradation

Section 13. Disposal Considerations
    Waste Disposal

Section 14. Transport Information
    DOT Classification        Not a DOT controlled material (United States).    
    Not applicable.
    Special Provisions for        Not applicable.    
    Isoproterenol sulfate
    DOT (Pictograms)

Section 15. Other Regulatory Information and Pictograms
    TSCA 8(b) inventory: No products were found.
    Federal and State
    Proposition 65
    Other Regulations        OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).    
    WHMIS (Canada) CLASS D-2A: Material causing other toxic effects (VERY TOXIC).
    Other Classifications
    DSCL (EEC)        R36/38- Irritating to eyes and skin.    
    Health Hazard
    HMIS (U.S.A.)        2 National Fire Protection    
    1 Flammability
    1 Association (U.S.A.)
    Fire Hazard
    2 0 Reactivity
    Specific hazard
    Personal Protection
    WHMIS (Canada)
    DSCL (Europe)
    TDG (Canada)
    ADR (Europe)
    Protective Equipment
    Lab coat.
    Dust respirator. Be sure to use an
    approved/certified respirator or
    equivalent. Wear appropriate respirator
    when ventilation is inadequate.
    Isoproterenol sulfate


Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220