Recommended Suppliersmore
Phenytoin sodium 630-93-3 MSDS

  Product identifiers
    Product name        : 5,5-Diphenylhydantoin sodium salt    
    CAS-No.        : 630-93-3    
  Relevant identified uses of the substance or mixture and uses advised against
    Identified uses        : Laboratory chemicals, Manufacture of substances    

  Classification of the substance or mixture
  Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
    Acute toxicity, Oral (Category 4)
    Skin sensitization (Category 1)
    Reproductive toxicity (Category 2)
  Classification according to EU Directives 67/548/EEC or 1999/45/EC
    Harmful if swallowed. May cause sensitization by skin contact. Possible risk of impaired fertility. Possible
    risk of harm to the unborn child.
  Label elements
  Labelling according Regulation (EC) No 1272/2008 [CLP]
    Signal word        Warning    
    Hazard statement(s)
    H302        Harmful if swallowed.    
    H317        May cause an allergic skin reaction.    
    H361        Suspected of damaging fertility or the unborn child.    
    Precautionary statement(s)
    P280        Wear protective gloves.    
    Supplemental Hazard        none    
  According to European Directive 67/548/EEC as amended.
    Hazard symbol(s)
    R22        Harmful if swallowed.    
    R43        May cause sensitization by skin contact.    
    R62        Possible risk of impaired fertility.    
    R63        Possible risk of harm to the unborn child.    
    S22        Do not breathe dust.    
    S36/37/39        Wear suitable protective clothing, gloves and eye/face protection.    
    S45        In case of accident or if you feel unwell, seek medical advice immediately    
    (show the label where possible).
  Other hazards - none

    Synonyms        : Phenytoin    
    Formula        : C15H11N2NaO2    
    Molecular Weight        : 274,25 g/mol    
    Component        Concentration    
  Phenytoin sodium
    CAS-No.        630-93-3        -    
    EC-No.        211-148-2    

  Description of first aid measures
  General advice
    Consult a physician. Show this safety data sheet to the doctor in attendance.
  If inhaled
    If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
  In case of skin contact
    Wash off with soap and plenty of water. Consult a physician.
  In case of eye contact
    Flush eyes with water as a precaution.
  If swallowed
    Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
  Most important symptoms and effects, both acute and delayed
    Gastrointestinal disturbance, Nausea, Dizziness, Headache, Ataxia., Blurred vision, Confusion.,
    Hallucinations., To the best of our knowledge, the chemical, physical, and toxicological properties have not
    been thoroughly investigated.
  Indication of any immediate medical attention and special treatment needed
    no data available

  Extinguishing media
  Suitable extinguishing media
    Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
  Special hazards arising from the substance or mixture
    Carbon oxides, nitrogen oxides (NOx), Sodium oxides
  Advice for firefighters
    Wear self contained breathing apparatus for fire fighting if necessary.
  Further information
    no data available

  Personal precautions, protective equipment and emergency procedures
    Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
    adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
  Environmental precautions
    Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
  Methods and materials for containment and cleaning up
    Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
    containers for disposal.
  Reference to other sections
    For disposal see section 13.

  Precautions for safe handling
    Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
    Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
  Conditions for safe storage, including any incompatibilities
    Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
  Specific end uses
    no data available

  Control parameters
  Components with workplace control parameters
  Exposure controls
  Appropriate engineering controls
    Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
    at the end of workday.
  Personal protective equipment
  Eye/face protection
    Face shield and safety glasses Use equipment for eye protection tested and approved under
    appropriate government standards such as NIOSH (US) or EN 166(EU).
  Skin protection
    Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
    (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
    contaminated gloves after use in accordance with applicable laws and good laboratory practices.
    Wash and dry hands.
    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
    the standard EN 374 derived from it.
    Immersion protection
    Material: Nitrile rubber
    Minimum layer thickness: 0,11 mm
    Break through time: > 480 min
    Material tested:Dermatril® ( Z677272, Size M)
    Splash protection
    Material: Nitrile rubber
    Minimum layer thickness: 0,11 mm
    Break through time: > 30 min
    Material tested:Dermatril® ( Z677272, Size M)
    data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 873000,     test method: EN374
    If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
    contact the supplier of the CE approved gloves. This recommendation is advisory only and must
    be evaluated by an Industrial Hygienist familiar with the specific situation of anticipated use by our
    customers. It should not be construed as offering an approval for any specific use scenario.
  Body Protection
    Complete suit protecting against chemicals, The type of protective equipment must be selected
    according to the concentration and amount of the dangerous substance at the specific workplace.
  Respiratory protection
    Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
    respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
    controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
    respirators and components tested and approved under appropriate government standards such
    as NIOSH (US) or CEN (EU).

  Information on basic physical and chemical properties
    a) Appearance        Form: solid    
    Colour: white
    b) Odour        no data available    
    c) Odour Threshold        no data available    
    d) pH        no data available    
    e) Melting point/freezing        Melting point/range: > 300 °C    
    f) Initial boiling point and no data available
    boiling range
    g) Flash point        no data available    
    h) Evaporation rate        no data available    
    i) Flammability (solid, gas) no data available
    j) Upper/lower        no data available    
    flammability or
    explosive limits
    k) Vapour pressure        no data available    
    l) Vapour density        no data available    
    m) Relative density        no data available    
    n) Water solubility        no data available    
    o) Partition coefficient: n- no data available
    p) Autoignition        no data available    
    q) Decomposition        no data available    
    r) Viscosity        no data available    
    s) Explosive properties        no data available    
    t) Oxidizing properties        no data available    
  Other safety information
    no data available

    no data available
  Chemical stability
    no data available
  Possibility of hazardous reactions
    no data available
  Conditions to avoid
    Avoid moisture. Light.
  Incompatible materials
  Hazardous decomposition products
    Other decomposition products - no data available

  Information on toxicological effects
  Acute toxicity
    LD50 Oral - rat - 1.530 mg/kg
  Skin corrosion/irritation
    no data available
  Serious eye damage/eye irritation
    no data available
  Respiratory or skin sensitization
    May cause sensitization by skin contact.
  Germ cell mutagenicity
    no data available
    This product is or contains a component that has been reported to be possibly carcinogenic based on its
    IARC, ACGIH, NTP, or EPA classification.
    IARC:        2B - Group 2B: Possibly carcinogenic to humans (Phenytoin sodium)    
    2B - Group 2B: Possibly carcinogenic to humans (Phenytoin sodium)
  Reproductive toxicity
    Possible risk of congenital malformation in the fetus.
    Suspected human reproductive toxicant
    Overexposure may cause reproductive disorder(s) based on tests with laboratory animals.
  Specific target organ toxicity - single exposure
    no data available
  Specific target organ toxicity - repeated exposure
    no data available
  Aspiration hazard
    no data available
  Potential health effects
  Inhalation        May be harmful if inhaled. May cause respiratory tract irritation.    
  Ingestion        Harmful if swallowed.    
  Skin        May be harmful if absorbed through skin. May cause skin irritation.    
  Eyes        May cause eye irritation.    
  Signs and Symptoms of Exposure
    Gastrointestinal disturbance, Nausea, Dizziness, Headache, Ataxia., Blurred vision, Confusion.,
    Hallucinations., To the best of our knowledge, the chemical, physical, and toxicological properties have not
    been thoroughly investigated.
  Additional Information
    RTECS: MU1400000

    no data available
  Persistence and degradability
    no data available
  Bioaccumulative potential
    no data available
  Mobility in soil
    no data available
  Results of PBT and vPvB assessment
    no data available
  Other adverse effects
    no data available

  Waste treatment methods
    Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
    professional waste disposal service to dispose of this material. Dissolve or mix the material with a
    combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
  Contaminated packaging
    Dispose of as unused product.

  UN number
    ADR/RID: 2811        IMDG: 2811        IATA: 2811    
  UN proper shipping name
    ADR/RID: TOXIC SOLID, ORGANIC, N.O.S. (Phenytoin sodium)
    IMDG: TOXIC SOLID, ORGANIC, N.O.S. (Phenytoin sodium)
    IATA:        Toxic solid, organic, n.o.s. (Phenytoin sodium)    
  Transport hazard class(es)
    ADR/RID: 6.1        IMDG: 6.1        IATA: 6.1    
  Packaging group
    ADR/RID: III        IMDG: III        IATA: III    
  Environmental hazards
    ADR/RID: no        IMDG Marine pollutant: no        IATA: no    
  Special precautions for user
    no data available

    This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
  Safety, health and environmental regulations/legislation specific for the substance or mixture
    no data available
  Chemical Safety Assessment
    no data available

  Further information
    Copyright 2012 Co. LLC. License granted to make unlimited paper copies for internal use
    The above information is believed to be correct but does not purport to be all inclusive and shall be
    used only as a guide. The information in this document is based on the present state of our knowledge
    and is applicable to the product with regard to appropriate safety precautions. It does not represent any
    guarantee of the properties of the product. Corporation and its Affiliates shall not be held
    liable for any damage resulting from handling or from contact with the above product. See
     and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220