Fuxin Xinqiu Xinrui Fine Chemi...Purity: 98%Lead Time: 14 Day
Fuxin Jinhongtai Chemical Co.,...Purity: 98%Lead Time: 21 Day
Panjin Honghe Chemical Company...Purity: 98%Lead Time: 14 Day
Shenzhen Baocheng Chemical Ind...Purity: 95%Lead Time: 7 Day
Xiangshui Kunpeng Chemical Co....Purity: 95%Lead Time: 14 Day
|Name:||4-Bromo-2-chloro-1-fluorobenzene 99% Material Safety Data Sheet|
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 22 38 50/53
Section 3 - HAZARDS IDENTIFICATION
Harmful if swallowed. Irritating to skin. Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.Dangerous for the environment.
Potential Health Effects
Causes eye irritation.
Causes skin irritation.
Harmful if swallowed. May cause irritation of the digestive tract.
Causes respiratory tract irritation.
No information found.
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid immediately.
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Antidote: None reported.
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible liquid.
Containers may explode when heated.
Use water spray to cool fire-exposed containers. Use water spray, dry chemical, carbon dioxide, or chemical foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Provide ventilation.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Use with adequate ventilation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 60811-21-4: Personal Protective Equipment Eyes: Wear chemical splash goggles.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: Not available.
Odor: aromatic odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 194 deg C @ 760mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 88 deg C ( 190.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Solubility in water: Insoluble.
Specific Gravity/Density: 1.7200g/cm3
Molecular Formula: BrC6H3(Cl)F
Molecular Weight: 209.45
Section 10 - STABILITY AND REACTIVITY
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide, hydrogen fluoride gas, hydrogen bromide.
Hazardous Polymerization: Will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 60811-21-4 unlisted.
4-Bromo-2-chlorofluorobenzene - Not listed by ACGIH, IARC, or NTP.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: XN N
R 22 Harmful if swallowed.
R 38 Irritating to skin.
R 50/53 Very toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37 Wear suitable protective clothing and
S 60 This material and its container must be
disposed of as hazardous waste.
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 60811-21-4: No information available.
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 60811-21-4 is not listed on Canada's Ingredient Disclosure List.
CAS# 60811-21-4 is not listed on the TSCA inventory.
It is for research and development use only.
SECTION 16 - ADDITIONAL INFORMATION