Infinium Pharmachem Pvt. Ltd.Purity: 99%Lead Time: 7 Day
Quzhou Mingfeng Chemical Co., ...Purity: 99%Lead Time: 15 Day
Lianyungang ZiYan chemical co....Purity: 98%Lead Time: 7 Day
Jiangsu Yonghua Fine Chemical ...Purity: 100%Lead Time: 1 Day
Jiangsu Z-ri Chemical Co.,LTDPurity: 98%Lead Time: 14 Day
|Name:||Iodobenzene 98% Material Safety Data Sheet|
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 22
Section 3 - HAZARDS IDENTIFICATION
Harmful if swallowed.Light sensitive.
Potential Health Effects
May cause eye irritation.
May cause skin irritation.
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May be harmful if swallowed.
May cause respiratory tract irritation.
No information found.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. If irritation develops, get medical aid.
Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Treat symptomatically and supportively.
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible liquid.
Containers may explode when heated.
In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from light.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Use adequate ventilation to keep airborne concentrations low. Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.
Exposure Limits CAS# 591-50-4: Personal Protective Equipment Eyes: Wear chemical splash goggles.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions. Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149.
Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: clear brown to yellow brown
pH: Not available.
Vapor Pressure: 1.96 hPa @ 30 C
Viscosity: Not available.
Boiling Point: 188 deg C @ 760.00mmHg
Freezing/Melting Point: -29 deg C
Autoignition Temperature: Not available.
Flash Point: 74 deg C ( 165.20 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Solubility in water: miscible with alcohol, chloroform and et
Specific Gravity/Density: 1.8230g/cm3
Molecular Formula: C6H5I
Molecular Weight: 204.01
Section 10 - STABILITY AND REACTIVITY
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, ignition sources, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 591-50-4: DA3390000 LD50/LC50:
CAS# 591-50-4: Inhalation, rat: LC50 = 16320 mg/m3; Oral, rat: LD50 = 1749 mg/kg.
Iodobenzene - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
R 22 Harmful if swallowed.
WGK (Water Danger/Protection)
CAS# 591-50-4: No information available.
CAS# 591-50-4 is listed on Canada's DSL List.
CAS# 591-50-4 is not listed on Canada's Ingredient Disclosure List.
CAS# 591-50-4 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION