Recommended Suppliersmore
Bis(2,2,6,6-tetramethyl-4-piperidyl)sebacate 52829-07-9 MSDS
  Bis(2,2,6,6-tetramethyl-4-piperidyl) Sebacate      Revision number: 5    
  SAFETY DATA SHEET

Section 1. IDENTIFICATION
  Product name:        Bis(2,2,6,6-tetramethyl-4-piperidyl) Sebacate    
    
  Revision number:        5    

Section 2. HAZARDS IDENTIFICATION
  GHS classification
  PHYSICAL HAZARDS        Not classified    
  HEALTH HAZARDS
  Acute toxicity (Inhalation)        Category 2    
    Category 2
  Skin corrosion/irritation
  Serious eye damage/eye irritation        Category 2A    
  ENVIRONMENTAL HAZARDS
  Acute aquatic hazard        Category 2    
  GHS label elements, including precautionary statements
  Pictograms or hazard symbols
  Signal word        Danger    
  Hazard statements        Fatal if inhaled    
    Causes skin irritation
    Causes serious eye irritation
    Toxic to aquatic life
  Precautionary statements:
    Do not breathe dust/fume/gas/mist/vapours/spray.
  [Prevention]
    Use only outdoors or in a well-ventilated area.
    Avoid release to the environment.
    Wash hands thoroughly after handling.
    Wear respiratory protection.
    Wear protective gloves/eye protection/face protection.
    IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
  [Response]
    breathing. Immediately call a POISON CENTER or doctor/physician.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
    if present and easy to do. Continue rinsing.
    If eye irritation persists: Get medical advice/attention.
    IF ON SKIN: Gently wash with plenty of soap and water.
    If skin irritation occurs: Get medical advice/attention.
    Take off contaminated clothing and wash before reuse.
  [Storage]        Store in a well-ventilated place. Keep container tightly closed.    
    Store locked up.

Section 2. HAZARDS IDENTIFICATION
  [Disposal]        Dispose of contents/container through a waste management company authorized by    
    the local government.

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Components:        Bis(2,2,6,6-tetramethyl-4-piperidyl) Sebacate    
    >98.0%(GC)
  Percent:
  CAS Number:        52829-07-9    
    Sebacic Acid Bis(2,2,6,6-tetramethyl-4-piperidyl) Ester , Decanedioic Acid
  Synonyms:
    Bis(2,2,6,6-tetramethyl-4-piperidyl) Ester
  Chemical Formula:        C28H52N2O4    

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Immediately call a POISON CENTER or doctor/physician.
    Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
  Skin contact:
    soap and water. If skin irritation or rash occurs: Get medical advice/attention.
    Rinse cautiously with water for several minutes. Remove contact lenses, if present
  Eye contact:
    and easy to do. Continue rinsing. If eye irritation persists: Get medical
    advice/attention.
  Ingestion:        Get medical advice/attention if you feel unwell. Rinse mouth.    
  Protection of first-aiders:        A rescuer should wear personal protective equipment, such as rubber gloves and air-    
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, water spray, carbon dioxide.    
  media:
  Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
    generate poisonous fume.
  from the chemical:
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Remove movable
    containers if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions,        Use extra personal protective equipment (self-contained breathing apparatus). Keep    
  protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should
  emergency procedures: be controlled around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
  containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
  up: appropriate laws and regulations.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
    Handling is performed in a well ventilated place. Wear suitable protective equipment.
  Technical measures:
    Prevent dispersion of dust. Wash hands and face thoroughly after handling.
    Use a closed system if possible. Use a local exhaust if dust or aerosol will be
    generated.
  Advice on safe handling: Avoid contact with skin, eyes and clothing.
  Conditions for safe storage, including any
  incompatibilities
  Storage conditions:        Keep container tightly closed. Store in a cool, dark and well-ventilated place.    
    Store locked up.

Section 7. HANDLING AND STORAGE
    Store away from incompatible materials such as oxidizing agents.
  Packaging material:        Comply with laws.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust. Also install safety shower and eye bath.    
  Personal protective equipment
  Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator,
    etc. Use respirators approved under appropriate government standards and follow
    local and national regulations.
  Hand protection:        Impervious gloves.    
  Eye protection:        Safety goggles. A face-shield, if the situation requires.    
  Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
    Solid
  Physical state (20°C):
  Form:        Crystal- Powder    
  Colour:        White - Almost white    
  Odour:        No data available    
  pH: No data available
  Melting point/freezing point:83°C
  Boiling point/range:        No data available    
  Flash point:        No data available    
  Flammability or explosive
  limits:
  Lower:        No data available    
    No data available
  Upper:
  Relative density:        No data available    
  Solubility(ies):
  [Water]        No data available    
  [Other solvents]
  Soluble:        Methanol    

Section 10. STABILITY AND REACTIVITY
    Stable under proper conditions.
  Chemical stability:
  Possibility of hazardous No special reactivity has been reported.
  reactions:
  Incompatible materials: Oxidizing agents
  Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx)
  products:

Section 11. TOXICOLOGICAL INFORMATION
    ihl-rat LC50:500 mg/m3/4H
  Acute Toxicity:
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
  NTP =        No data available    
  Reproductive toxicity:        No data available    
  RTECS Number:        HD8315000    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
    No data available
  Fish:
  Crustacea:        No data available    

Section 12. ECOLOGICAL INFORMATION
  Algae:        No data available    
  Persistence / degradability: No data available
  Bioaccumulative        No data available    
  potential(BCF):
  Mobility in soil
    No data available
  Log Pow:
  Soil adsorption (Koc):        No data available    
    No data available
  Henry's Law
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material
    with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
    Observe all federal, state and local regulations when disposing of the substance.

Section 14. TRANSPORT INFORMATION
    6.1: Toxic substance.
  Hazards Class:
  UN-No:        2811    
    Toxic solid, organic, n.o.s.
  Proper shipping name:
  Packing group:        II    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
    loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220