Recommended Suppliersmore
VINYL METHACRYLATE 4245-37-8 MSDS
  Vinyl Methacrylate (stabilized with MEHQ)      Revision number: 5    
  SAFETY DATA SHEET

Section 1. IDENTIFICATION
  Product name:        Vinyl Methacrylate (stabilized with MEHQ)    
    
  Revision number:        5    

Section 2. HAZARDS IDENTIFICATION
  GHS classification
  PHYSICAL HAZARDS
    Category 2
  Flammable liquids
  HEALTH HAZARDS
    Category 2
  Skin corrosion/irritation
  Serious eye damage/eye irritation        Category 2A    
    Not classified
  ENVIRONMENTAL HAZARDS
  GHS label elements, including precautionary statements
  Pictograms or hazard symbols
  Signal word        Danger    
  Hazard statements        Highly flammable liquid and vapour    
    Causes skin irritation
    Causes serious eye irritation
  Precautionary statements:
    Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
  [Prevention]
    Keep container tightly closed.
    Use explosion-proof electrical/ventilating/lighting equipment. Take precautionary
    measures against ignition by the static discharge and the spark.
    Wash hands thoroughly after handling.
    Wear protective gloves/eye protection/face protection.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
  [Response]
    if present and easy to do. Continue rinsing.
    If eye irritation persists: Get medical advice/attention.
    IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
    skin with water/shower.
    If skin irritation occurs: Get medical advice/attention.
    Take off contaminated clothing and wash before reuse.
  [Storage]        Store in a well-ventilated place. Keep cool.    
  [Disposal]        Dispose of contents/container through a waste management company authorized by    
    the local government.
  Other hazards which do not        May cause polimerization.    
  result in classification
  Vinyl Methacrylate (stabilized with MEHQ)

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Components:        Vinyl Methacrylate (stabilized with MEHQ)    
  Percent:        >98.0%(GC)    
  CAS Number:        4245-37-8    
  Synonyms:        Methacrylic Acid Vinyl Ester    
  Chemical Formula:        C6H8O2    

Section 4. FIRST AID MEASURES
    Remove victim to fresh air and keep at rest in a position comfortable for breathing.
  Inhalation:
    Get medical advice/attention if you feel unwell.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. If skin irritation or rash occurs: Get medical advice/attention.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing. If eye irritation persists: Get medical
    advice/attention.
  Ingestion:        Get medical advice/attention if you feel unwell. Rinse mouth.    
  Protection of first-aiders:        A rescuer should wear personal protective equipment, such as rubber gloves and air-    
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, carbon dioxide.    
  media:
  Unsuitable extinguishing Water (It may scatter and spread fire.)
  media:
  Specific hazards arising This substance may polimerize explosively when heated or involved in a fire.
  from the chemical:        Container may explode when heated. Combat fire from a sheltered position.    
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
    spraying with water. Eliminate all ignition sources if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
    Use personal protective equipment. Keep people away from and upwind of spill/leak.
  Personal precautions,
  protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
  emergency procedures: around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Absorb spilled material in dry sand or inert absorbent before recovering it into a
  containment and cleaning covered container. In case of large amount of spillage, contain a spill by bunding.
  up: Adhered or collected material should be promptly disposed of, in accordance with
    appropriate laws and regulations.
  Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
  hazards:        case of a fire. Use spark-proof tools and explosion-proof equipment.    

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent generation of vapour or mist. Keep away from heat/sparks/open flame/hot
    surfaces. -No smoking. Take measures to prevent the build up of electrostatic
    charge. Use explosion-proof equipment. Wash hands and face thoroughly after
    handling.
    Use a closed system if possible. Use a ventilation, local exhaust if vapour or aerosol
    will be generated.
  Advice on safe handling:        Avoid contact with skin, eyes and clothing.    
  Vinyl Methacrylate (stabilized with MEHQ)

Section 7. HANDLING AND STORAGE
  Conditions for safe storage, including any
  incompatibilities
  Storage conditions:        Keep container tightly closed. Store in a cool, dark and well-ventilated place.    
    Store away from incompatible materials such as oxidizing agents.
    Light-sensitive
  Packaging material:        Comply with laws.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
    Install a closed system or local exhaust. Also install safety shower and eye bath.
  Engineering controls:
  Personal protective equipment
  Respiratory protection: Vapor respirator. Follow local and national regulations.
  Hand protection:        Protective gloves.    
  Eye protection:        Safety glasses. A face-shield, if the situation requires.    
  Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
    Liquid
  Physical state (20°C):
  Form:        Clear    
  Colour:        Colorless    
  Odour:        No data available    
  pH: No data available
  Melting point/freezing point:No data available
  Boiling point/range:        112°C    
    16°C
  Flash point:
  Flammability or explosive
  limits:
  Lower:        1.8%    
    12.5%
  Upper:
  Relative density:        0.94    
  Solubility(ies):
  [Water]        No data available    
  [Other solvents]
  Soluble:        Methanol    

Section 10. STABILITY AND REACTIVITY
    Polymerization may occur under the influences of heat, light or on contact with
  Chemical stability:
    polymelization initiators such as peroxides etc.
  Possibility of hazardous No special reactivity has been reported.
  reactions:
  Conditions to avoid:        Heat, Spark, Open flame, Static discharge, Light    
  Incompatible materials: Oxidizing agents, Strong acids, Strong bases
  Hazardous decomposition Carbon monoxide, Carbon dioxide
  products:

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        No data available    
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
    No data available
  NTP =
  Reproductive toxicity:        No data available    
  Vinyl Methacrylate (stabilized with MEHQ)

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
  Fish:        No data available    
  Crustacea:        No data available    
  Algae:        No data available    
  Persistence / degradability: No data available
  Bioaccumulative        No data available    
  potential(BCF):
  Mobility in soil
  Log Pow:        No data available    
    No data available
  Soil adsorption (Koc):
  Henry's Law        No data available    
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
    incinerator equipped with an afterburner and scrubber system but exert extra care in igniting as this material is
    highly flammable. Observe all federal, state and local regulations when disposing of the substance

Section 14. TRANSPORT INFORMATION
  Hazards Class:        3: Flammable liquid.    
    3272
  UN-No:
  Proper shipping name:        Esters, n.o.s.    
  Packing group:        II    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
    loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220