Recommended Suppliersmore
4-Amino-1-methylpiperidine 41838-46-4 MSDS
  4-Amino-1-methylpiperidine      Revision number: 1    
  SAFETY DATA SHEET

Section 1. BASE INFORMATION
  Product name:        4-Amino-1-methylpiperidine    

  Revision number:        1    

Section 2. HAZARDS IDENTIFICATION
  Classification of the GHS
  PHYSICAL HAZARDS
  Flammable liquids        Category 3    
  HEALTH HAZARDS
  Skin corrosion/irritation        Category 1B    
    Category 1
  Serious eye damage/eye irritation
  ENVIRONMENTAL HAZARDS        Not classified    
  GHS label elements
  Pictograms or hazard symbols
  Signal word        Danger    
  Hazard statement        Flammable liquid and vapour    
    Causes severe skin burns and eye damage
  Precautionary statements
    Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
  [Prevention]
    Keep container tightly closed.
    Use explosion-proof electrical/ventilating/lighting equipment. Take precautionary
    measures against ignition by the static discharge and the spark.
    Do not breathe.
    Wash hands thoroughly after handling.
    Wear protective gloves/eye protection/face protection.
  [Response]        IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for    
    breathing.
    IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
    if present and easy to do. Continue rinsing.
    IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
    skin with water/shower.
    Wash contaminated clothing before reuse.
    Immediately call a POISON CENTER or doctor/physician.
  [Storage]        Store in a well-ventilated place. Keep cool.    
    Store locked up.
  [Disposal]        Dispose of contents/container through a waste management company authorized by    
    the local government
  4-Amino-1-methylpiperidine

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Component(s):        4-Amino-1-methylpiperidine    
  Percent:        >97.0%(GC)(T)    
  CAS Number:        41838-46-4    
  Chemical Formula:        C6H14N2    

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Immediately call a POISON CENTER or doctor/physician.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. Immediately call a POISON CENTER or doctor/physician.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing.Immediately call a POISON CENTER or
    doctor/physician.
  Ingestion:        Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT    
    induce vomiting.
  Protection of first-aiders:        A rescuer should wear personal protective equipment, such as rubber gloves and air-    
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, carbon dioxide.    
  media:
  Extinguishing media not to Water (It may scatter and spread fire.)
  be used:
  Specific hazards:        Take care as it may decompose upon combustion or in high temperatures to    
    generate poisonous fume.
  Specific methods:        Fire-extinguishing work is done from the windward and the suitable fire-extinguishing    
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
    spraying with water. Eliminate all ignition sources if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
    Use extra personal protective equipment (self-contained breathing apparatus). Keep
  Personal precautions,
  protective equipment and people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-
  emergency procedures: involved personnel should be controlled around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Absorb spilled material in dry sand or inert absorbent before recovering it into an
  containment and cleaning airtight container. In case of large amount of spillage, contain a spill by bunding.
  up: Adhered or collected material should be promptly disposed of, in accordance with
    appropriate laws and regulations.
  Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
  hazards:        case of a fire. Use spark-proof tools and explosion-proof equipment.    

Section 7. HANDLING AND STORAGE
  Handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent generation of vapor or mist. Keep away from heat/sparks/open flame/hot
    surfaces. -No smoking. Take measures to prevent the build up of electrostatic
    charge. Use explosion-proof equipment. Wash hands and face thoroughly after
    handling.
    Use a closed system if possible. Use a ventilation, local exhaust if vapor or aerosol
    will be generated.
  Advice on safe handling:        Avoid contact with skin, eyes and clothing.    
  Storage
  4-Amino-1-methylpiperidine

Section 7. HANDLING AND STORAGE
  Storage conditions:        Keep container tightly closed. Store in a cool, dark and well-ventilated place.    
    Store under inert gas.
    Store locked up.
    Store away from incompatible materials such as oxidizing agents.
  Packaging material:        Law is followed.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust. Also install safety shower and eye bath.    
  Personal protective equipment
  Respiratory protection: Half or full facepiece respirator, self-contained breathing apparatus(SCBA), supplied
    air respirator, etc. Use respirators approved under appropriate government standards
    and follow local and national regulations.
  Hand protection:        Impervious gloves.    
  Eye protection:        Safety goggles. A face-shield, if the situation requires.    
  Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Liquid    
  Form:        clear    
  Color:        Colorless - Yellow    
  Odor:        No data available    
  pH: No data available
  Melting point/freezing point:No data available
    83 °C/6.4kPa
  Boiling Point/Range:
  Flash Point:        No data available    
  Explosive limits
  Lower:        No data available    
  Upper:        No data available    
  Density:        0.91    
  Solubility:        No data available    

Section 10. STABILITY AND REACTIVITY
  Stability:        Stable under proper conditions.    
    No special reactivity has been reported.
  Reactivity:
  Conditions to avoid:        Air-sensitive    
  Incompartible materials: oxidizing agents, strong acids
  Hazardous Decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx)
  Products:

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        No data available    
  Skin corrosion/irritation: No data available
    No data available
  Serious eye
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
  NTP =        No data available    
  Reproductive toxicity:        No data available    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
    No data available
  Fish:
  Crustacea:        No data available    
    No data available
  Algae:
  Persistence / degradability: No data available
  4-Amino-1-methylpiperidine

Section 12. ECOLOGICAL INFORMATION
  Bioaccumulative        No data available    
  potential(BCF):
  Mobillity in soil
    No data available
  log Pow:
  Soil adsorption (Koc):        No data available    
    No data available
  Henry's Law
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
    incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
    disposing of the substance.

Section 14. TRANSPORT INFORMATION
    8: Corrosive.
  Hazards Class:
  Subsidiary risk:        3: Flammable liquid.    
    2920
  UN-No:
  Proper shipping name:        Corrosive liquid, flammable, n.o.s.    
    II
  Packing group:

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26,
  2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
    prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220