Recommended Suppliersmore
flunisolide 3385-03-3 MSDS

Section 1. Chemical Product and Company Identification
    Flunisolide, Anhydrous
    Common Name/
    Trade Name
    Flunisolide, Anhydrous

Section 4. First Aid Measures
    Eye Contact        Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at    
    least 15 minutes. Get medical attention.
    Skin Contact        In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove    
    contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get
    medical attention.
    Serious Skin Contact        Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek immediate    
    medical attention.
    Inhalation        If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get    
    medical attention.
    Serious Inhalation        Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or    
    waistband. Seek medical attention.
    Ingestion        If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by    
    mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical
    attention immediately.
    Serious Ingestion        Not available.    

Section 5. Fire and Explosion Data
    Flammability of the Product May be combustible at high temperature.
    Auto-Ignition Temperature Not available.
    Flash Points        Not available.    
    Flammable Limits        Not available.    
    Products of Combustion        These products are carbon oxides (CO, CO2), halogenated compounds.    
    Fire Hazards in Presence of Slightly flammable to flammable in presence of heat.
    Various Substances        Non-flammable in presence of shocks.    
    Explosion Hazards in Presence Risks of explosion of the product in presence of mechanical impact: Not available.
    of Various Substances        Risks of explosion of the product in presence of static discharge: Not available.    
    Fire Fighting Media        SMALL FIRE: Use DRY chemical powder.    
    and Instructions        LARGE FIRE: Use water spray, fog or foam. Do not use water jet.    
    Special Remarks on        Not available.    
    Fire Hazards
    Special Remarks on Explosion Not available.

Section 6. Accidental Release Measures
    Small Spill        Use appropriate tools to put the spilled solid in a convenient waste disposal container.    
    Large Spill        Poisonous solid.    
    Stop leak if without risk. Do not get water inside container. Do not touch spilled material. Use water spray to
    reduce vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Eliminate all ignition
    Flunisolide, Anhydrous

Section 7. Handling and Storage
    Precautions        Keep locked up.. Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk,    
    evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not
    breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory
    equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with
    skin and eyes.
    Storage        Keep container tightly closed. Keep container in a cool, well-ventilated area. Do not store above 25°C (77°F).    

Section 8. Exposure Controls/Personal Protection
    Engineering Controls        Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below    
    recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
    airborne contaminants below the exposure limit.
    Personal Protection        Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent.    
    Personal Protection in Case of Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used
    a Large Spill        to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist    
    BEFORE handling this product.
    Exposure Limits        Not available.    

Section 9. Physical and Chemical Properties
    Physical state and appearance Solid.        Odor        Not available.    
    Not available.
    Molecular Weight        434.51 g/mole    
    Not available.
    Not available.
    pH (1% soln/water)
    Boiling Point        Not available.    
    Not available.
    Melting Point
    Critical Temperature        Not available.    
    Specific Gravity        Not available.    
    Vapor Pressure        Not applicable.    
    Vapor Density        Not available.    
    Not available.
    Odor Threshold        Not available.    
    Water/Oil Dist. Coeff.        Not available.    
    Ionicity (in Water)        Not available.    
    Dispersion Properties        Not available.    
    Solubility        Not available.    

Section 10. Stability and Reactivity Data
    Stability        The product is stable.    
    Instability Temperature        Not available.    
    Conditions of Instability        Excess heat    
    Incompatibility with various Not available.
    Flunisolide, Anhydrous
    Corrosivity        Not available.    
    Special Remarks on        Not available.    
    Special Remarks on        Not available.    
    Polymerization        Will not occur.    

Section 11. Toxicological Information
    Routes of Entry        Inhalation. Ingestion.    
    Toxicity to Animals        Acute oral toxicity (LD50): >0.5 mg/kg [Mouse].    
    Chronic Effects on Humans Not available.
    Other Toxic Effects on        Hazardous in case of skin contact (irritant), of ingestion, of inhalation.    
    Special Remarks on        Not available.    
    Toxicity to Animals
    Special Remarks on        May cause adverse reproductive effects (paternal and maternal effects, fetotoxicity) and birth defects based on    
    Chronic Effects on Humans        animal data. No human data found at this time.    
    Special Remarks on other        Acute Potential Health Effects:    
    Toxic Effects on Humans        Skin: May cause skin irritation.    
    Eyes: May cause eye irritation.
    Inhalation: May cause respiratory tract irritation. May cause ulceration of nasal septum.
    Ingestion: Harmful if swallowed. May cause gastrointestinal tract irritation. May affect behavior/Central Nervous
    system (somnolence). May also affect metabolism (weight loss or decreased weight gain),and blood(aplastic

Section 12. Ecological Information
    Ecotoxicity        Not available.    
    BOD5 and COD        Not available.    
    Products of Biodegradation        Possibly hazardous short term degradation products are not likely. However, long term degradation products may    
    Toxicity of the Products        The products of degradation are as toxic as the product itself.    
    of Biodegradation
    Not available.
    Special Remarks on the
    Products of Biodegradation

Section 13. Disposal Considerations
    Waste Disposal        Waste must be disposed of in accordance with federal, state and local environmental    
    control regulations.
    Flunisolide, Anhydrous

Section 14. Transport Information
    DOT Classification        CLASS 6.1: Poisonous material.    
    Identification        : Toxic Solid, Organic, n.o.s. (Flunisolide) UNNA: 2811 PG: III    
    Not available.
    Special Provisions for
    DOT (Pictograms)

Section 15. Other Regulatory Information and Pictograms
    California prop. 65: This product contains the following ingredients for which the State of California has found to
    Federal and State
    cause cancer, birth defects or other reproductive harm, which would require a warning under the statute:
    Flunisolide, Anhydrous
    California prop. 65: This product contains the following ingredients for which the State of California has found to
    cause reproductive harm (female) which would require a warning under the statute: Flunisolide, Anhydrous
    California prop. 65: This product contains the following ingredients for which the State of California has found to
    cause birth defects which would require a warning under the statute: Flunisolide, Anhydrous
    California prop. 65: This product contains the following ingredients for which the State of California has found
    Proposition 65
    to cause birth defects which would require a warning under the statute: Flunisolide, Anhydrous
    Other Regulations        OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).    
    EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances.
    WHMIS (Canada) Not controlled under WHMIS (Canada).
    Other Classifications
    DSCL (EEC)        R28- Very toxic if swallowed.        S1/2- Keep locked up and out of the reach of    
    R36/38- Irritating to eyes and skin.        children.    
    S28- After contact with skin, wash immediately
    with plenty of water.
    S36/37- Wear suitable protective clothing and
    S45- In case of accident or if you feel unwell,
    seek medical advice immediately (show the
    label where possible).
    S46- If swallowed, seek medical advice
    immediately and show this container or label.
    Health Hazard
    HMIS (U.S.A.)        2 National Fire Protection    
    1 Flammability
    1 Association (U.S.A.)
    Fire Hazard
    2 0 Reactivity
    Specific hazard
    Personal Protection
    WHMIS (Canada)
    DSCL (Europe)
    Flunisolide, Anhydrous
    TDG (Canada)
    ADR (Europe)
    Protective Equipment
    Lab coat.
    Dust respirator. Be sure to use an
    approved/certified respirator or


Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220