Recommended Suppliersmore
9-Anthrylmethyl Methacrylate 31645-35-9 MSDS
  9-Anthrylmethyl Methacrylate
  SAFETY DATA SHEET

Section 1. IDENTIFICATION
  Product name:        9-Anthrylmethyl Methacrylate    

Section 2. HAZARDS IDENTIFICATION
  GHS classification
  PHYSICAL HAZARDS        Not classified    
  HEALTH HAZARDS
  Skin corrosion/irritation        Category 2    
    Category 2A
  Serious eye damage/eye irritation
  Germ cell mutagenicity        Category 2    
    Not classified
  ENVIRONMENTAL HAZARDS
  GHS label elements, including precautionary statements
  Pictograms or hazard symbols
  Signal word        Warning    
  Hazard statements        Causes skin irritation    
    Causes serious eye irritation
    Suspected of causing genetic defects
  Precautionary statements:
    Obtain special instructions before use.
  [Prevention]
    Do not handle until all safety precautions have been read and understood.
    Wash hands thoroughly after handling.
    Wear protective gloves/eye protection/face protection.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
  [Response]
    if present and easy to do. Continue rinsing.
    If eye irritation persists: Get medical advice/attention.
    IF ON SKIN: Gently wash with plenty of soap and water.
    If skin irritation occurs: Get medical advice/attention.
    Take off contaminated clothing and wash before reuse.
    IF exposed or concerned: Get medical advice/attention.
  [Storage]        Store locked up.    
  [Disposal]        Dispose of contents/container through a waste management company authorized by    
    the local government.
  Other hazards which do not        May cause polimerization.    
  result in classification
  9-Anthrylmethyl Methacrylate

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Components:        9-Anthrylmethyl Methacrylate    
  Percent:        >98.0%(LC)    
  CAS Number:        31645-35-9    
  Synonyms:        Methacrylic Acid 9-Anthrylmethyl Ester    
  Chemical Formula:        C19H16O2    

Section 4. FIRST AID MEASURES
    Remove victim to fresh air and keep at rest in a position comfortable for breathing.
  Inhalation:
    Get medical advice/attention.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. Get medical advice/attention.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Get medical advice/attention.
  Ingestion:        Get medical advice/attention.Rinse mouth.    
    A rescuer should wear personal protective equipment, such as rubber gloves and air-
  Protection of first-aiders:
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, water spray, carbon dioxide.    
  media:
  Specific hazards arising This substance may polimerize explosively when heated or involved in a fire.
  from the chemical:        Container may explode when heated. Combat fire from a sheltered position.    
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
    spraying with water. Eliminate all ignition sources if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions,        Use extra personal protective equipment (P3 filter respirator for toxic particles). Keep    
  protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should
  emergency procedures: be controlled around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
  containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
  up: appropriate laws and regulations.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent dispersion of dust. Wash hands and face thoroughly after handling.
    Use a closed system if possible. Use a local exhaust if dust or aerosol will be
    generated.
  Advice on safe handling: Avoid all contact!
  Conditions for safe storage, including any
  incompatibilities
  Storage conditions:        Keep container tightly closed. Store in a cool and dark place.    
    Store locked up.
    Store away from incompatible materials such as oxidizing agents.
    Light-sensitive
  Packaging material:        Comply with laws.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
    Install a closed system or local exhaust. Also install safety shower and eye bath.
  Engineering controls:
  9-Anthrylmethyl Methacrylate

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Personal protective equipment
  Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator,
    etc. Use respirators approved under appropriate government standards and follow
    local and national regulations.
  Hand protection:        Impervious gloves.    
    Safety goggles. A face-shield, if the situation requires.
  Eye protection:
  Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Solid    
    Crystal- Powder
  Form:
  Colour:        Slightly pale yellow - Yellow    
    No data available
  Odour:
  pH: No data available
  Melting point/freezing point:88°C
  Boiling point/range:        No data available    
  Flash point:        No data available    
  Flammability or explosive
  limits:
  Lower:        No data available    
  Upper:        No data available    
  Relative density:        No data available    
  Solubility(ies):
  [Water]        No data available    
  [Other solvents]
  Soluble:        Toluene    

Section 10. STABILITY AND REACTIVITY
  Chemical stability:        Polymerization may occur under the influences of heat, light or on contact with    
    polymelization initiators such as peroxides etc.
  Possibility of hazardous No special reactivity has been reported.
  reactions:
  Conditions to avoid:        Heat, Light    
  Incompatible materials: Oxidizing agents
  Hazardous decomposition Carbon monoxide, Carbon dioxide
  products:

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        No data available    
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
  NTP =        No data available    
  Reproductive toxicity:        No data available    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
  Fish:        No data available    
  Crustacea:        No data available    
    No data available
  Algae:
  Persistence / degradability: No data available
    No data available
  Bioaccumulative
  potential(BCF):
  9-Anthrylmethyl Methacrylate

Section 12. ECOLOGICAL INFORMATION
  Mobility in soil
    No data available
  Log Pow:
  Soil adsorption (Koc):        No data available    
    No data available
  Henry's Law
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material
    with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
    Observe all federal, state and local regulations when disposing of the substance.

Section 14. TRANSPORT INFORMATION
    Does not correspond to the classification standard of the United Nations
  Hazards Class:
  UN-No:        Not listed    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
    loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220