Recommended Suppliersmore
1,1-Di(tert-butylperoxy)cyclohexane
CAS No.: 3006-86-8
Synonyms:
Formula: C14H28O4
Exact Mass: 260.19900
Molecular Weight: 260.37000
PSA: 36.92000
LogP: 4.14020
Reference Price: $184/kg Inquiry Now
1,1-Di(tert-butylperoxy)cyclohexane 3006-86-8 MSDS
Name: 1 1-Di(tert-butylperoxy)cyclohexane 50% solution in mineral oil Material Safety Data Sheet
Synonym:
CAS: 3006-86-8
Section 1 - Chemical Product   MSDS Name:1 1-Di(tert-butylperoxy)cyclohexane 50% solution in mineral oil Material Safety Data Sheet
Synonym:

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
3006-86-8 1,1-Di(tert-butylperoxy)cyclohexane, 5 221-111-2
Hazard Symbols: O
Risk Phrases: 7

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
May cause fire.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.

Section 4 - FIRST AID MEASURES
  Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Strong oxidizer. Contact with other material may cause fire.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Remove all sources of ignition.

Section 7 - HANDLING and STORAGE
  Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Avoid mechanical shock and friction.
Storage:
Do not store near combustible materials. Store in a tightly closed container. Store in a dry area. Keep refrigerated. (Store below 4C/39F.) Keep away from reducing agents.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Use explosion-proof ventilation equipment.
Exposure Limits CAS# 3006-86-8: Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Clear liquid
Color: Not available.
Odor: faint odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: 35 mPa.s @ 20 deg C
Boiling Point: 52 - 54 deg C @ 0.1 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: 350 deg C ( 662.00 deg F)
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Miscible.
Specific Gravity/Density: 0.95
Molecular Formula: C14H28O4
Molecular Weight: 260.37

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
A dangerous self-accelerating decomposition reaction and, under certain circumstances, explosion or fire can be caused by direct contact with incompatible substances or by thermal decomposition at and above the SADT (see Section 16).
Conditions to Avoid:
Incompatible materials, ignition sources, combustible materials.
Incompatibilities with Other Materials:
Oxidizing agents, reducing agents, acids, bases, rust, heavy metals.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, acetone, methane.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 3006-86-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1,1-Di(tert-butylperoxy)cyclohexane, 50% solution in mineral oil - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION
  Other No information available.

Section 13 - DISPOSAL CONSIDERATIONS
  Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION
 
IATA
Shipping Name: ORGANIC PEROXIDE TYPE D, LIQUID
Hazard Class: 5.2
UN Number: 3105
Packing Group:
IMO
Shipping Name: ORGANIC PEROXIDE TYPE D, LIQUID
Hazard Class: 5.2
UN Number: 3105
Packing Group: II
RID/ADR
No information available.

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: O
Risk Phrases:
R 7 May cause fire.
Safety Phrases:
S 3/7 Keep container tightly closed in a cool,
well-ventilated place.
S 14A Keep away from acids, reducing agents and
polymerisation catalysts.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 3006-86-8: No information available.
Canada
CAS# 3006-86-8 is listed on Canada's DSL List.
CAS# 3006-86-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3006-86-8 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220