Recommended Suppliersmore
3-methyl-1-phenylbutan-2-one 2893-05-2 MSDS
  3-Methyl-1-phenyl-2-butanone      Revision number: 1    
  SAFETY DATA SHEET

Section 1. BASE INFORMATION
  Product name:        3-Methyl-1-phenyl-2-butanone    

  Revision number:        1    

Section 2. HAZARDS IDENTIFICATION
  Classification of the GHS
  PHYSICAL HAZARDS        Not classified    
  HEALTH HAZARDS        Not classified    
    Not classified
  ENVIRONMENTAL HAZARDS
  GHS label elements
    None
  Pictograms or hazard symbols
  Signal word        No signal word    
    None
  Hazard statement
  Precautionary statements        None    

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Component(s):        3-Methyl-1-phenyl-2-butanone    
  Percent:        >98.0%(GC)    
  CAS Number:        2893-05-2    
  Synonyms:        Benzyl Isopropyl Ketone    
  Chemical Formula:        C11H14O    

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Get medical advice/attention if you feel unwell.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Rinse skin with    
    water/shower. If skin irritation or rash occurs: Get medical advice/attention.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing. If eye irritation persists: Get medical
    advice/attention.
  Ingestion:        Get medical advice/attention if you feel unwell. Rinse mouth.    
    A rescuer should wear personal protective equipment, such as rubber gloves and air-
  Protection of first-aiders:
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, carbon dioxide.    
  media:
  Extinguishing media not to Water (It may scatter and spread fire.)
  be used:
  3-Methyl-1-phenyl-2-butanone

Section 5. FIRE-FIGHTING MEASURES
  Specific methods:        Fire-extinguishing work is done from the windward and the suitable fire-extinguishing    
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Remove movable
    containers if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
    Use personal protective equipment. Keep people away from and upwind of spill/leak.
  Personal precautions,
  protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
  emergency procedures: around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
  containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
  up: material should be promptly disposed of, in accordance with appropriate laws and
    regulations.

Section 7. HANDLING AND STORAGE
  Handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent generation of vapor or mist. Wash hands and face thoroughly after handling.
    Use a ventilation, local exhaust if vapor or aerosol will be generated.
  Advice on safe handling:        Avoid contact with skin, eyes and clothing.    
  Storage
    Keep container tightly closed. Store in a cool and dark place.
  Storage conditions:
    Store away from incompatible materials such as oxidizing agents.
    Law is followed.
  Packaging material:

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust as possible so that workers should not be    
    exposed directly. Also install safety shower and eye bath.
  Personal protective equipment
  Respiratory protection: Vapor respirator. Follow local and national regulations.
  Hand protection:        Protective gloves.    
  Eye protection:        Safety glasses. A face-shield, if the situation requires.    
  Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Liquid    
  Form:        clear    
  Color:        Very pale yellow - Yellow    
  Odor:        No data available    
  pH: No data available
  Melting point/freezing point:No data available
  Boiling Point/Range:        240 °C    
  Flash Point:        No data available    
  Explosive limits
  Lower:        No data available    
  Upper:        No data available    
  Density:        0.97    
  Solubility:        No data available    

Section 10. STABILITY AND REACTIVITY
  Stability:        Stable under proper conditions.    
    No special reactivity has been reported.
  Reactivity:
  Incompartible materials: oxidizing agents
  3-Methyl-1-phenyl-2-butanone

Section 10. STABILITY AND REACTIVITY
  Hazardous Decomposition Carbon monoxide, Carbon dioxide
  Products:

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        No data available    
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
  NTP =        No data available    
  Reproductive toxicity:        No data available    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
    No data available
  Fish:
  Crustacea:        No data available    
    No data available
  Algae:
  Persistence / degradability: No data available
    No data available
  Bioaccumulative
  potential(BCF):
  Mobillity in soil
  log Pow:        No data available    
    No data available
  Soil adsorption (Koc):
  Henry's Law        No data available    
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
    incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
    disposing of the substance.

Section 14. TRANSPORT INFORMATION
  Hazards Class:        Does not correspond to the classification standard of the United Nations    
    Not Listed
  UN-No:

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26,
  2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
    prescribed.
  3-Methyl-1-phenyl-2-butanone


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220