Recommended Suppliersmore
potassium,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-heptadecafluorooctane-1-sulfonate 2795-39-3 MSDS

Section 1: Product Identification
   Chemical Name:       Perfluorooctanesulphonic acid,potassium salt, 97%    
   CAS Registry Number:       2795-39-3    
   Formula:       C8F17SO3K    
   EINECS Number:       220-528-7    
   Chemical Family:       organofluorine compounds    
   Synonym:       1-Octanesulfonic acid, 1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-heptadecafluoro-, potassium salt    

Section 2: Composition and Information on Ingredients
   Ingredient       CAS Number       Percent       ACGIH (TWA)       OSHA (PEL)    
   Title Compound       2795-39-3       100%       2.5mg/m3 (as F)       2.5mg/m3 (as F)    

Section 3: Hazards Identification
   Emergency Overview:       Dust may be irritating to the respiratory tract, skin and eyes. May be harmful if swallowed.    
   Primary Routes of Exposure:       Ingestion, inhalation, eyes and skin    
   Eye Contact:       May cause irritation of the eyes.    
   Skin Contact:       May cause irritation of the skin. May cause redness, itching and pain.    
   Inhalation:       May be irritating to the nose, mucous membranes and respiratory tract.    
   No specific information is available on the physiological effects of ingestion. May cause gastrointestinal
   irritation, nausea, and vomiting.
   Acute Health Affects:       May be irritating to skin, eyes and respiratory tract. Do not breath dust.    
   Product contains fluorine which under certain conditions of use, decomposition, or metabolism, may generate
   Chronic Health Affects:       fluoride ion, causing, nausea, vomiting, labored breathing, hypocalcaemia, deterioration of bone and tooth    
   structure, kidney and liver damage.
   NTP:       No    
   IARC:       No    
   OSHA:       No    

SECTION 4: First Aid Measures
   Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
   Eye Exposure:
   assistance in keeping their eye lids open. Get immediate medical attention.
   Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
   Skin Exposure:
   irritation persists.
   Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
   in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
   Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
   vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
   Flash Point:       not applicable    
   Autoignition Temperature:       no data    
   Explosion Limits:       no data    
   Extinguishing Medium:       none required    
   If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure
   Special Fire Fighting Procedures:
   self-contained breathing apparatus and full protective clothing.
   Hazardous Combustion and       If involved in a fire, this material may emit toxic organic fumes, and corrosive hydrogen and carbonyl fluorides.    
   Decomposion Products:
   Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
   To avoid raising dust, small spills may be mixed with diatomaceous earth, sand, vermiculite or other suitable
   Spill and Leak Procedures:
   inert material and swept up.

SECTION 7: Handling and Storage
   Handling and Storage:       Store in a tightly sealed container in a cool well ventilated area.    

SECTION 8: Exposure Controls and Personal Protection
   Eye Protection:       Always wear approved safety glasses when handling a chemical substance in the laboratory.    
   Skin Protection:       Wear protective clothing and gloves.    
   Ventilation:       Material may form a fine dust. If possible, handle the material in an efficient fume hood.    
   If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
   Protection Program to be in compliance with 29 CFR 1910.134.
   Ventilation:       Material may form a fine dust. If possible, handle the material in an efficient fume hood.    
   Additional Protection:       No additional protection required.    

SECTION 9: Physical and Chemical Properties
   Color and Form:       white pwdr.    
   Molecular Weight:       538.21    
   Melting Point:       no data    
   Boiling Point:       no data    
   Vapor Pressure:       not applicable    
   Specific Gravity:       no data    
   Odor:       no data    
   Solubility in Water:       slightly soluble    

SECTION 10: Stability and Reactivity
   Stability:       air and moisture stable    
   Hazardous Polymerization:       no hazardous polymerization    
   Conditions to Avoid:       None    
   Incompatibility:       active metals, strong oxidizing agents, strong alkali.    
   Decomposition Products:       carbon monoxide, organic fumes, hydrogen fluoride, bromine, and carbonyl fluoride    

SECTION 11: Toxicological Information
   RTECS Data:       No information available in the RTECS files.    
   Carcinogenic Effects:       No data available    
   Mutagenic Effects:       No data available    
   Tetratogenic Effects:       No data available    

SECTION 12: Ecological Information
   Ecological Information:       No information available    

SECTION 13: Disposal Considerations
   Disposal:       Dispose of according to local, state and federal regulations.    

SECTION 14: Transportation
   Shipping Name (CFR):       Non-hazardous    
   Hazard Class (CFR):       NA    
   Additional Hazard Class (CFR):       NA    
   Packaging Group (CFR):       NA    
   UN ID Number (CFR):       NA    
   Shipping Name (IATA):       Non-hazardous    
   Hazard Class (IATA):       NA    
   Additional Hazard Class (IATA):       NA    
   Packaging Group (IATA):       NA    
   UN ID Number (IATA):       NA    

SECTION 15: Regulatory Information
   TSCA:       Listed in the TSCA inventory.    
   SARA (Title 313):       Title compound not listed.    
   Second Ingredient:       none    


Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220