Recommended Suppliersmore
tridecyl 2-methylprop-2-enoate 2495-25-2 MSDS
  Tridecyl Methacrylate (mixture of branched chain      Revision number: 5    
  isomers) (stabilized with MEHQ)
  SAFETY DATA SHEET

Section 1. IDENTIFICATION
  Product name:        Tridecyl Methacrylate (mixture of branched chain isomers) (stabilized with MEHQ)    
                  
  Revision number:        5    

Section 2. HAZARDS IDENTIFICATION
  GHS classification
  PHYSICAL HAZARDS        Not classified    
    Not classified
  HEALTH HAZARDS
  ENVIRONMENTAL HAZARDS        Not classified    
  GHS label elements, including precautionary statements
  Pictograms or hazard symbols        None    
  Signal word        No signal word    
  Hazard statements        None    
  Precautionary statements:        None    
  Other hazards which do not        May cause polimerization.    
  result in classification

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
    Substance
  Substance/mixture:
  Components:        Tridecyl Methacrylate (mixture of branched chain isomers) (stabilized with MEHQ)    
    ....
  Percent:
  CAS Number:        2495-25-2    
    Methacrylic Acid Tridecyl Ester
  Synonyms:
  Chemical Formula:        C17H32O2    

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Get medical advice/attention if you feel unwell.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Rinse skin with    
    water/shower. If skin irritation or rash occurs: Get medical advice/attention.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing. If eye irritation persists: Get medical
    advice/attention.
    Get medical advice/attention if you feel unwell. Rinse mouth.
  Ingestion:
  Protection of first-aiders:        A rescuer should wear personal protective equipment, such as rubber gloves and air-    
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
    Dry chemical, foam, carbon dioxide.
  Suitable extinguishing
  media:
  Tridecyl Methacrylate (mixture of branched
  chain isomers) (stabilized with MEHQ)

Section 5. FIRE-FIGHTING MEASURES
  Unsuitable extinguishing Water (It may scatter and spread fire.)
  media:
  Specific hazards arising This substance may polimerize explosively when heated or involved in a fire.
  from the chemical:        Container may explode when heated. Combat fire from a sheltered position.    
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
    spraying with water. Eliminate all ignition sources if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
    Use personal protective equipment. Keep people away from and upwind of spill/leak.
  Personal precautions,
  protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
  emergency procedures: around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Absorb spilled material in dry sand or inert absorbent before recovering it into a
  containment and cleaning covered container. In case of large amount of spillage, contain a spill by bunding.
  up: Adhered or collected material should be promptly disposed of, in accordance with
    appropriate laws and regulations.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent generation of vapour or mist. Wash hands and face thoroughly after
    handling.
    Use a ventilation, local exhaust if vapour or aerosol will be generated.
  Advice on safe handling: Avoid contact with skin, eyes and clothing.
  Conditions for safe storage, including any
  incompatibilities
  Storage conditions:        Keep container tightly closed. Store in a cool and dark place.    
    Store away from incompatible materials such as oxidizing agents.
    Light-sensitive
    Comply with laws.
  Packaging material:

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust as possible so that workers should not be    
    exposed directly. Also install safety shower and eye bath.
  Personal protective equipment
  Respiratory protection: Vapor respirator. Follow local and national regulations.
  Hand protection:        Protective gloves.    
    Safety glasses. A face-shield, if the situation requires.
  Eye protection:
  Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Liquid    
    Clear
  Form:
  Colour:        Colorless - Very pale yellow    
    No data available
  Odour:
  pH: No data available
  Melting point/freezing point:No data available
  Boiling point/range:        No data available    
  Flash point:        150°C    
  Flammability or explosive
  limits:
  Lower:        No data available    
  Tridecyl Methacrylate (mixture of branched
  chain isomers) (stabilized with MEHQ)

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Upper:        No data available    
  Relative density:        0.88    
  Solubility(ies):
    No data available
  [Water]
  [Other solvents]        No data available    

Section 10. STABILITY AND REACTIVITY
  Chemical stability:        Polymerization may occur under the influences of heat, light or on contact with    
    polymelization initiators such as peroxides etc.
  Possibility of hazardous No special reactivity has been reported.
  reactions:
  Conditions to avoid:        Heat, Light    
  Incompatible materials: Oxidizing agents
  Hazardous decomposition Carbon monoxide, Carbon dioxide
  products:

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        No data available    
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
    No data available
  NTP =
  Reproductive toxicity:        No data available    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
  Fish:        No data available    
  Crustacea:        No data available    
  Algae:        No data available    
  Persistence / degradability: No data available
  Bioaccumulative        No data available    
  potential(BCF):
  Mobility in soil
  Log Pow:        No data available    
  Soil adsorption (Koc):        No data available    
  Henry's Law        No data available    
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
    incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
    disposing of the substance.

Section 14. TRANSPORT INFORMATION
  Hazards Class:        Does not correspond to the classification standard of the United Nations    
  UN-No:        Not listed    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
    loading and unloading were prescribed.
  Tridecyl Methacrylate (mixture of branched
  chain isomers) (stabilized with MEHQ)


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220