Recommended Suppliersmore
3-[[3-aminopropyl(dimethyl)silyl]oxy-dimethylsilyl]propan-1-amine 2469-55-8 MSDS
  1,3-Bis(3-aminopropyl)tetramethyldisiloxane [Monomer Revision number: 1
  for silicon modified polyamides]
  SAFETY DATA SHEET

Section 1. BASE INFORMATION
  Product name:        1,3-Bis(3-aminopropyl)tetramethyldisiloxane [Monomer for silicon modified    
    polyamides]
             
  Revision number:        1    

Section 2. HAZARDS IDENTIFICATION
  Classification of the GHS
  PHYSICAL HAZARDS
    Category 4
  Flammable liquids
  HEALTH HAZARDS
    Category 1C
  Skin corrosion/irritation
  Serious eye damage/eye irritation        Category 1    
  ENVIRONMENTAL HAZARDS        Not classified    
  GHS label elements
  Pictograms or hazard symbols
  Signal word        Danger    
    Combustible liquid
  Hazard statement
    Causes severe skin burns and eye damage
  Precautionary statements
  [Prevention]        Keep away from flames and hot surfaces.    
    Do not breathe.
    Wash hands thoroughly after handling.
    Wear protective gloves and eye/face protection.
  [Response]        IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for    
    breathing.
    IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
    if present and easy to do. Continue rinsing.
    IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
    skin with water/shower.
    Wash contaminated clothing before reuse.
    Immediately call a POISON CENTER or doctor/physician.
  [Storage]        Store in a well-ventilated place. Keep cool.    
    Store locked up.
  [Disposal]        Dispose of contents/container through a waste management company authorized by    
    the local government
  1,3-Bis(3-aminopropyl)tetramethyldisiloxane
  [Monomer for silicon modified polyamides]

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Component(s):        1,3-Bis(3-aminopropyl)tetramethyldisiloxane [Monomer for silicon modified    
    polyamides]
  Percent:        >80.0%(GC)    
  CAS Number:        2469-55-8    
  Synonyms:        Tetramethyl-1,3-bis(3-aminopropyl)disiloxane    
  Chemical Formula:        C10H28N2OSi2    

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Immediately call a POISON CENTER or doctor/physician.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. Immediately call a POISON CENTER or doctor/physician.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing.Immediately call a POISON CENTER or
    doctor/physician.
  Ingestion:        Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT    
    induce vomiting.
  Symptoms/effects:        burning sensation, cough, wheezing, laryngitis, shortness of breath, headache,    
    nausea, vomiting, redness, pain, burn
  Protection of first-aiders:        A rescuer should wear personal protective equipment, such as rubber gloves and air-    
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, carbon dioxide.    
  media:
  Extinguishing media not to Water (It may scatter and spread fire.)
  be used:
  Specific hazards:        Take care as it may decompose upon combustion or in high temperatures to    
    generate poisonous fume.
    Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
  Specific methods:
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Remove movable
    containers if safe to do so.
    When extinguishing fire, be sure to wear personal protective equipment.
  Special protective
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions,        Use extra personal protective equipment (self-contained breathing apparatus). Keep    
  protective equipment and people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-
  emergency procedures: involved personnel should be controlled around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
  containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
  up: material should be promptly disposed of, in accordance with appropriate laws and
    regulations.
  Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
    case of a fire. Use spark-proof tools and explosion-proof equipment.
  hazards:

Section 7. HANDLING AND STORAGE
  Handling
    Handling is performed in a well ventilated place. Wear suitable protective equipment.
  Technical measures:
    Prevent generation of vapor or mist. Keep away from flames and hot surfaces. Take
    measures to prevent the build up of electrostatic charge. Use explosion-proof
    equipment. Wash hands and face thoroughly after handling.
  1,3-Bis(3-aminopropyl)tetramethyldisiloxane
  [Monomer for silicon modified polyamides]

Section 7. HANDLING AND STORAGE
    Use a closed system, ventilation.
  Advice on safe handling: Avoid contact with skin, eyes and clothing.
  Storage
    Keep container tightly closed. Store in a cool, dark and well-ventilated place.
  Storage conditions:
    Store under inert gas.
    Protect from moisture.
    Store locked up.
    Store away from incompatible materials such as oxidizing agents.
  Packaging material:        Law is followed.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust. Also install safety shower and eye bath.    
  Personal protective equipment
  Respiratory protection: Half or full facepiece respirator, self-contained breathing apparatus(SCBA), supplied
    air respirator, etc. Use respirators approved under appropriate government standards
    and follow local and national regulations.
  Hand protection:        Impervious gloves.    
  Eye protection:        Safety goggles. A face-shield, if the situation requires.    
  Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Liquid    
  Form:        clear    
  Color:        Colorless - Pale yellow    
  Odor:        Amine-like    
  pH: No data available
  Melting point/freezing point:No data available
  Boiling Point/Range:        142 °C/1.5kPa    
  Flash Point:        91°C    
  Explosive limits
  Lower:        No data available    
  Upper:        No data available    
  Vapor Pressure:        <133Pa/20°C    
  Vapor Density:        >1    
  Density:        0.90    
  Solubility:        No data available    

Section 10. STABILITY AND REACTIVITY
  Stability:        Stable under proper conditions.    
    No special reactivity has been reported.
  Reactivity:
  Conditions to avoid:        Moisture-sensitive, Air-sensitive    
  Incompartible materials: oxidizing agents, water
  Hazardous Decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx), Silicon oxides
  Products:

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        ipr-mus LD50:80 mg/kg    
    orl-rat LDLo:500 mg/kg
    skn-rbt LD:>2 g/kg
  Skin corrosion/irritation: skn-rbt 500 uL/24H SEV
    eye-rbt 100 uL/24H SEV
  Serious eye
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
  NTP =        No data available    
  1,3-Bis(3-aminopropyl)tetramethyldisiloxane
  [Monomer for silicon modified polyamides]

Section 11. TOXICOLOGICAL INFORMATION
  Reproductive toxicity:        No data available    
  RTECS Number:        JM9235000    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
  Fish:        No data available    
    No data available
  Crustacea:
  Algae:        No data available    
  Persistence / degradability: No data available
  Bioaccumulative        No data available    
  potential(BCF):
  Mobillity in soil
  log Pow:        No data available    
  Soil adsorption (Koc):        No data available    
    No data available
  Henry's Law
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
    incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
    disposing of the substance.

Section 14. TRANSPORT INFORMATION
  Hazards Class:        8: Corrosive.    
  UN-No:        2735    
    Amines, liquid, corrosive, n.o.s.
  Proper shipping name:
  Packing group:        III    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26,
  2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
    prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220