Recommended Suppliersmore
2-(dimethylamino)ethyl prop-2-enoate 2439-35-2 MSDS
  2-(Dimethylamino)ethyl Acrylate (stabilized with MEHQ) Revision number: 6
  SAFETY DATA SHEET

Section 1. IDENTIFICATION
  Product name:        2-(Dimethylamino)ethyl Acrylate (stabilized with MEHQ)    
    
  Revision number:        6    

Section 2. HAZARDS IDENTIFICATION
  GHS classification
  PHYSICAL HAZARDS        Not classified    
  HEALTH HAZARDS
  Acute toxicity (Oral)        Category 4    
    Category 3
  Acute toxicity (Dermal)
  Acute toxicity (Inhalation)        Category 1    
    Category 1B
  Skin corrosion/irritation
  Serious eye damage/eye irritation        Category 1    
    Category 1
  Skin sensitization
  Reproductive toxicity        Category 2    
    Respiratory system, Central nervous system
  Specific target organ toxicity
  - Single exposure [Category 1]
    Category 2
  Aspiration hazard
  ENVIRONMENTAL HAZARDS
  Acute aquatic hazard        Category 1    
  GHS label elements, including precautionary statements
  Pictograms or hazard symbols
  Signal word        Danger    
    Harmful if swallowed
  Hazard statements
    Toxic in contact with skin
    Fatal if inhaled
    Causes severe skin burns and eye damage
    May cause an allergic skin reaction
    Suspected of damaging fertility or the unborn child
    Causes damage to organs : Respiratory system Central
    nervous system
    May be harmful if swallowed and enters airways
    Very toxic to aquatic life
  Precautionary statements:
  MEHQ)

Section 2. HAZARDS IDENTIFICATION
  [Prevention]        Obtain special instructions before use.    
    Do not handle until all safety precautions have been read and understood.
    Do not breathe dust/fume/gas/mist/vapours/spray.
    Use only outdoors or in a well-ventilated area.
    Avoid release to the environment.
    Do not eat, drink or smoke when using this product.
    Contaminated work clothing should not be allowed out of the workplace.
    Wash hands thoroughly after handling.
    Wear respiratory protection.
    Wear protective gloves and eye/face protection.
  [Response]        IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for    
    breathing. Immediately call a POISON CENTER or doctor/physician.
    IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Do NOT
    induce vomiting.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
    if present and easy to do. Continue rinsing.
    IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
    skin with water/shower.
    If skin irritation or rash occurs: Get medical advice/attention.
    Remove/Take off immediately all contaminated clothing.
    Wash contaminated clothing before reuse.
    Immediately call a POISON CENTER or doctor/physician.
    Collect spillage.
  [Storage]        Store in a well-ventilated place. Keep container tightly closed.    
    Store locked up.
  [Disposal]        Dispose of contents/container through a waste management company authorized by    
    the local government.
  Other hazards which do not        May cause polimerization.    
  result in classification

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
    Substance
  Substance/mixture:
  Components:        2-(Dimethylamino)ethyl Acrylate (stabilized with MEHQ)    
    >97.0%(GC)
  Percent:
  CAS Number:        2439-35-2    
    Acrylic Acid 2-(Dimethylamino)ethyl Ester (stabilized with MEHQ)
  Synonyms:
  Chemical Formula:        C7H13NO2    

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Immediately call a POISON CENTER or doctor/physician.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. Immediately call a POISON CENTER or doctor/physician.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing.Immediately call a POISON CENTER or
    doctor/physician.
    Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT
  Ingestion:
    induce vomiting.
  Protection of first-aiders:        A rescuer should wear personal protective equipment, such as rubber gloves and air-    
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, water in large amounts, carbon dioxide.    
  media:
  MEHQ)

Section 5. FIRE-FIGHTING MEASURES
  Specific hazards arising This substance may polimerize explosively when heated or involved in a fire.
  from the chemical:        Container may explode when heated. Combat fire from a sheltered position.    
    Take care as it may decompose upon combustion or in high temperatures to
    generate poisonous fume.
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
    spraying with water. Eliminate all ignition sources if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
    Use extra personal protective equipment (self-contained breathing apparatus). Keep
  Personal precautions,
  protective equipment and people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-
  emergency procedures: involved personnel should be controlled around the leakage area by roping off, etc.
  Environmental precautions: Be careful not to let it flow into rivers, etc., since adverse effects on the environment
    are concerned.
  Methods and materials for Absorb spilled material in dry sand or inert absorbent before recovering it into a
  containment and cleaning covered container. In case of large amount of spillage, contain a spill by bunding.
  up: Adhered or collected material should be promptly disposed of, in accordance with
    appropriate laws and regulations.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent generation of vapour or mist. Wash hands and face thoroughly after
    handling.
    Use a closed system if possible. Use a ventilation, local exhaust if vapour or aerosol
    will be generated.
  Advice on safe handling: Avoid all contact!
  Conditions for safe storage, including any
  incompatibilities
  Storage conditions:        Keep container tightly closed. Store in a cool, dark and well-ventilated place.    
    Store locked up.
    Store away from incompatible materials such as oxidizing agents.
    Light-sensitive
  Packaging material:        Comply with laws.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust. Also install safety shower and eye bath.    
  Personal protective equipment
  Respiratory protection: Half or full facepiece respirator, self-contained breathing apparatus(SCBA), supplied
    air respirator, etc. Use respirators approved under appropriate government standards
    and follow local and national regulations.
  Hand protection:        Impervious gloves.    
    Safety goggles. A face-shield, if the situation requires.
  Eye protection:
  Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Liquid    
    Clear
  Form:
  Colour:        Colorless - Pale yellow    
  Odour:        No data available    
  pH: No data available
  Melting point/freezing point:No data available
  Boiling point/range:        161°C    
  MEHQ)

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Flash point:        58°C    
  Flammability or explosive
  limits:
  Lower:        No data available    
  Upper:        No data available    
  Relative density:        0.94    
  Solubility(ies):
    Soluble
  [Water]
  [Other solvents]
  Soluble:        Alcohols, Benzene    

Section 10. STABILITY AND REACTIVITY
  Chemical stability:        Polymerization may occur under the influences of heat, light or on contact with    
    polymelization initiators such as peroxides etc.
  Possibility of hazardous No special reactivity has been reported.
  reactions:
    Heat, Light
  Conditions to avoid:
  Incompatible materials: Oxidizing agents, Strong bases, Reducing agents
  Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx)
  products:

Section 11. TOXICOLOGICAL INFORMATION
    ihl-rat LC50:66 mg/m3/4H
  Acute Toxicity:
    orl-rat LD50:455 mg/kg
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: cyt-hmn-lym 130 mg/L (-S9)
    cyt-hmn-lym 25 mg/L (-S9)
  Carcinogenicity:
  IARC =        No data available    
  NTP =        No data available    
  Reproductive toxicity:        No data available    
  RTECS Number:        AS8578000    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
    No data available
  Fish:
  Crustacea:        No data available    
    No data available
  Algae:
  Persistence / degradability: No data available
    No data available
  Bioaccumulative
  potential(BCF):
  Mobility in soil
  Log Pow:        No data available    
    No data available
  Soil adsorption (Koc):
  Henry's Law        No data available    
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
    incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
    disposing of the substance.

Section 14. TRANSPORT INFORMATION
  Hazards Class:        6.1: Toxic substance.    
  MEHQ)

Section 14. TRANSPORT INFORMATION
  UN-No:        3302    
  Proper shipping name:        2-Dimethylaminoethyl acrylate    
  Packing group:        II    
  Marine pollutant        Y    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
    loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220