Recommended Suppliersmore
2-tert-Butyl-6-methylphenol 2219-82-1 MSDS
  6-tert-Butyl-o-cresol      Revision number: 1    
  SAFETY DATA SHEET

Section 1. BASE INFORMATION
  Product name:        6-tert-Butyl-o-cresol    

  Revision number:        1    

Section 2. HAZARDS IDENTIFICATION
  Classification of the GHS
  PHYSICAL HAZARDS        Not classified    
  HEALTH HAZARDS
    Category 5
  Acute toxicity (Oral)
  Acute toxicity (Dermal)        Category 5    
    Category 1B
  Skin corrosion/irritation
  Serious eye damage/eye irritation        Category 1    
    Not classified
  ENVIRONMENTAL HAZARDS
  GHS label elements
  Pictograms or hazard symbols
  Signal word        Danger    
  Hazard statement        May be harmful in contact with skin and if swallowed    
    Causes severe skin burns and eye damage
  Precautionary statements
  [Prevention]        Do not breathe.    
    Wash hands thoroughly after handling.
    Wear protective gloves/eye protection/face protection.
    IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
  [Response]
    breathing.
    IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
    if present and easy to do. Continue rinsing.
    IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
    skin with water/shower.
    Wash contaminated clothing before reuse.
    Immediately call a POISON CENTER or doctor/physician.
  [Storage]        Store locked up.    
  [Disposal]        Dispose of contents/container through a waste management company authorized by    
    the local government

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
    6-tert-Butyl-o-cresol
  Component(s):
  6-tert-Butyl-o-cresol

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Percent:        >95.0%(GC)    
  CAS Number:        2219-82-1    
  Synonyms:        2-tert-Butyl-6-methylphenol    
  Chemical Formula:        C11H16O    

Section 4. FIRST AID MEASURES
    Remove victim to fresh air and keep at rest in a position comfortable for breathing.
  Inhalation:
    Immediately call a POISON CENTER or doctor/physician.
    Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
  Skin contact:
    soap and water. Immediately call a POISON CENTER or doctor/physician.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing.Immediately call a POISON CENTER or
    doctor/physician.
  Ingestion:        Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT    
    induce vomiting.
    A rescuer should wear personal protective equipment, such as rubber gloves and air-
  Protection of first-aiders:
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, water spray, carbon dioxide.    
  media:
  Specific methods:        Fire-extinguishing work is done from the windward and the suitable fire-extinguishing    
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Remove movable
    containers if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions,        Use extra personal protective equipment (P3 filter respirator for toxic particles). Keep    
  protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should
  emergency procedures: be controlled around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
  containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
  up: appropriate laws and regulations.

Section 7. HANDLING AND STORAGE
  Handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent dispersion of dust. Wash hands and face thoroughly after handling.
    Use a closed system if possible. Use a local exhaust if dust or aerosol will be
    generated.
  Advice on safe handling:        Avoid contact with skin, eyes and clothing.    
  Storage
  Storage conditions:        Keep container tightly closed. Store in a cool and dark place.    
    Store locked up.
    Store away from incompatible materials such as oxidizing agents.
  Packaging material:        Law is followed.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust. Also install safety shower and eye bath.    
  Personal protective equipment
  6-tert-Butyl-o-cresol

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator,
    etc. Use respirators approved under appropriate government standards and follow
    local and national regulations.
  Hand protection:        Impervious gloves.    
  Eye protection:        Safety goggles. A face-shield, if the situation requires.    
  Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
    Solid
  Physical state (20°C):
  Form:        crystal    
  Color:        White - Slightly pale reddish yellow    
  Odor:        No data available    
  pH: No data available
  Melting point/freezing point:28°C (Freezing point)
  Boiling Point/Range:        No data available    
  Flash Point:        No data available    
  Explosive limits
  Lower:        No data available    
  Upper:        No data available    
  Vapor Density:        5.7    
  Density:        No data available    
  Solubility:        Soluble in : Ethanol Benzene Hexane    
    Insoluble in: Water

Section 10. STABILITY AND REACTIVITY
    Stable under proper conditions.
  Stability:
  Reactivity:        No special reactivity has been reported.    
    Light-sensitive
  Conditions to avoid:
  Incompartible materials: oxidizing agents, acid chlorides, acid anhydrides, bases
  Hazardous Decomposition Carbon monoxide, Carbon dioxide
  Products:

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        ivn-mus LD50:120 mg/kg    
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
  NTP =        No data available    
  Reproductive toxicity:        No data available    
  RTECS Number:        SK1578200    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
    96h LC50:62 mg/L (Oryzias latipes)
  Fish:
  Crustacea:        No data available    
    No data available
  Algae:
  Persistence / degradability: 9 % (by BOD)
    43 (conc. 200 ug/L), 42 (conc. 20 ug/L)
  Bioaccumulative
  potential(BCF):
  Mobillity in soil
  log Pow:        No data available    
    No data available
  Soil adsorption (Koc):
  6-tert-Butyl-o-cresol

Section 12. ECOLOGICAL INFORMATION
  Henry's Law        No data available    
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material
    with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
    Observe all federal, state and local regulations when disposing of the substance.

Section 14. TRANSPORT INFORMATION
  Hazards Class:        8: Corrosive.    
    2430
  UN-No:
  Proper shipping name:        Alkylphenols, solid, n.o.s.    
  Packing group:        II    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26,
  2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
    prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220