Recommended Suppliersmore
N,N'-bis[2,6-di(propan-2-yl)phenyl]methanediimine 2162-74-5 MSDS
  Bis(2,6-diisopropylphenyl)carbodiimide      Revision number: 1    
  SAFETY DATA SHEET

Section 1. BASE INFORMATION
  Product name:        Bis(2,6-diisopropylphenyl)carbodiimide    

  Revision number:        1    

Section 2. HAZARDS IDENTIFICATION
  Classification of the GHS
  PHYSICAL HAZARDS        Not classified    
  HEALTH HAZARDS
    Category 3
  Acute toxicity (Oral)
  ENVIRONMENTAL HAZARDS        Not classified    
  GHS label elements
  Pictograms or hazard symbols
  Signal word        Danger    
  Hazard statement        Toxic if swallowed    
  Precautionary statements
  [Prevention]        Do not eat, drink or smoke when using this product.    
    Wash hands thoroughly after handling.
  [Response]        IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Rinse    
    mouth.
  [Storage]        Store locked up.    
    Dispose of contents/container through a waste management company authorized by
  [Disposal]
    the local government

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Component(s):        Bis(2,6-diisopropylphenyl)carbodiimide    
  Percent:        >98.0%(N)    
  CAS Number:        2162-74-5    
  Chemical Formula:        C25H34N2    

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Get medical advice/attention if you feel unwell.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Rinse skin with    
    water/shower. If skin irritation or rash occurs: Get medical advice/attention.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing. If eye irritation persists: Get medical
    advice/attention.
  Bis(2,6-diisopropylphenyl)carbodiimide

Section 4. FIRST AID MEASURES
  Ingestion:        Immediately call a POISON CENTER or doctor/physician. Rinse mouth.    
  Protection of first-aiders:        A rescuer should wear personal protective equipment, such as rubber gloves and air-    
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, water spray, carbon dioxide.    
  media:
  Specific hazards:        Take care as it may decompose upon combustion or in high temperatures to    
    generate poisonous fume.
  Specific methods:        Fire-extinguishing work is done from the windward and the suitable fire-extinguishing    
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Remove movable
    containers if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
    Use extra personal protective equipment (P3 filter respirator for toxic particles). Keep
  Personal precautions,
  protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should
  emergency procedures: be controlled around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
  containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
  up: appropriate laws and regulations.

Section 7. HANDLING AND STORAGE
  Handling
    Handling is performed in a well ventilated place. Wear suitable protective equipment.
  Technical measures:
    Prevent dispersion of dust. Wash hands and face thoroughly after handling.
    Use a closed system if possible. Use a local exhaust if dust or aerosol will be
    generated.
  Advice on safe handling:        Avoid contact with skin, eyes and clothing.    
  Storage
    Keep container tightly closed. Store in a cool and dark place.
  Storage conditions:
    Store locked up.
    Store away from incompatible materials such as oxidizing agents.
  Packaging material:        Law is followed.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust. Also install safety shower and eye bath.    
  Personal protective equipment
  Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator,
    etc. Use respirators approved under appropriate government standards and follow
    local and national regulations.
  Hand protection:        Impervious gloves.    
  Eye protection:        Safety goggles. A face-shield, if the situation requires.    
  Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Solid    
  Form:        crystal - powder    
  Color:        White - Very pale yellow    
  Odor:        No data available    
  pH: No data available
  Melting point/freezing point:51 °C
  Boiling Point/Range:        No data available    
  Bis(2,6-diisopropylphenyl)carbodiimide

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Flash Point:        No data available    
  Explosive limits
  Lower:        No data available    
    No data available
  Upper:
  Density:        No data available    
    No data available
  Solubility:
  Autoignition Temperature:        430°C    

Section 10. STABILITY AND REACTIVITY
  Stability:        Stable under proper conditions.    
  Reactivity:        No special reactivity has been reported.    
  Incompartible materials: oxidizing agents
  Hazardous Decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx)
  Products:

Section 11. TOXICOLOGICAL INFORMATION
    orl-rat LD50:200 mg/kg
  Acute Toxicity:
  Skin corrosion/irritation: No data available
    No data available
  Serious eye
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
    No data available
  IARC =
  NTP =        No data available    
    No data available
  Reproductive toxicity:
  RTECS Number:        CY0887250    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
  Fish:        No data available    
  Crustacea:        No data available    
  Algae:        No data available    
  Persistence / degradability: No data available
  Bioaccumulative        No data available    
  potential(BCF):
  Mobillity in soil
  log Pow:        No data available    
  Soil adsorption (Koc):        No data available    
  Henry's Law        No data available    
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material
    with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
    Observe all federal, state and local regulations when disposing of the substance.

Section 14. TRANSPORT INFORMATION
  Hazards Class:        6.1: Toxic substance.    
  UN-No:        2811    
  Proper shipping name:        Toxic solid, organic, n.o.s.    
  Packing group:        III    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26,
  2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
    prescribed.
  Bis(2,6-diisopropylphenyl)carbodiimide


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220