|Name:||Dipentylamine 99% Material Safety Data Sheet|
|Synonym:||Diamylamine; 1-Pentanamine, N-pentyl-; Di-n-amylamine|
Synonym:Diamylamine; 1-Pentanamine, N-pentyl-; Di-n-amylamine
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 10 22 24 36/37/38
Section 3 - HAZARDS IDENTIFICATION
Flammable. Harmful if swallowed. Toxic in contact with skin.
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Causes eye burns. Vapor or mist may cause irritation and severe burns. May cause chemical conjunctivitis and corneal damage.
Harmful if absorbed through the skin. Causes skin burns. May cause cyanosis of the extremities. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Harmful if swallowed. May cause severe and permanent damage to the digestive tract. May cause burns to the gastrointestinal tract.
Ingestion of large amounts may cause CNS depression. May cause systemic effects.
Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema. May cause burns to the respiratory tract. May cause systemic effects. May cause burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting.
Effects may be delayed.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Induce vomiting only when instructed to do so by a physician.
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do not use mouth-to-mouth resuscitation if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Flammable liquid and vapor. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Runoff from fire control or dilution water may cause pollution.
For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Do not use combustible materials such as sawdust. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Do not ingest or inhale. Use only in a chemical fume hood. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area. Keep containers tightly closed.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels.
Exposure Limits CAS# 2050-92-2: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Clear liquid
Color: clear, colorless
pH: Not available.
Vapor Pressure: 0.153 mm Hg @ 25 C
Viscosity: Not available.
Boiling Point: 202.0 - 203.0 deg C @ 760.00m
Freezing/Melting Point: -7.85 deg C
Autoignition Temperature: Not applicable.
Flash Point: 52 deg C ( 125.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: slightly soluble
Specific Gravity/Density: .7770g/cm3
Molecular Formula: C10H23N
Molecular Weight: 157.30
Section 10 - STABILITY AND REACTIVITY
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong acids, strong oxidizing agents, acid chlorides, acid anhydrides, plastics, Absorbs CO2 from the air..
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 2050-92-2: RZ9100000 LD50/LC50:
CAS# 2050-92-2: Oral, rat: LD50 = 270 mg/kg; Skin, rabbit: LD50 = 350 uL/kg.
Inhalation, rat: LCLo = 63 Carcinogenicity:
Dipentylamine - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Other No information available.
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
Shipping Name: Di-n-AMYLAMINE
Hazard Class: 3 (6.1)
UN Number: 2841
Packing Group: III
Shipping Name: Di-normal-AMYLAMINE
Hazard Class: 3.3 (6.1)
UN Number: 2841
Packing Group: III
Shipping Name: Di-n-AMYLAMINE
Hazard Class: 3
UN Number: 2841
Packing group: III
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: T
R 10 Flammable.
R 22 Harmful if swallowed.
R 24 Toxic in contact with skin.
R 36/37/38 Irritating to eyes, respiratory system
S 16 Keep away from sources of ignition - No
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 2050-92-2: No information available.
CAS# 2050-92-2 is listed on Canada's DSL List.
CAS# 2050-92-2 is listed on Canada's Ingredient Disclosure List.
CAS# 2050-92-2 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION