Recommended Suppliersmore
2-(propan-2-ylsulfanylmethyl)furan 1883-78-9 MSDS

Section I.Chemical Product and Company Identification
    Chemical Name Furfuryl Isopropyl Sulfide
    Portland OR
    Synonym        2-(Isopropylthiomethyl)furan    
    Chemical Formula        C8H12OS    
    1883-78-9
    CAS Number

Section II.        Composition and Information on Ingredients    
    Toxicology Data
    Chemical Name        CAS Number Percent (%)        TLV/PEL    
    Furfuryl Isopropyl Sulfide        1883-78-9 Min. 98.0 (GC) Not available.        Not available.    

Section III. Hazards Identification
    Acute Health Effects        Irritating to eyes and skin on contact. Inhalation causes irritation of the lungs and respiratory system. Inflammation of the    
    eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening, or,
    occasionally, blistering.
    Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.
    Chronic Health Effects        CARCINOGENIC EFFECTS : Not available.    
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    DEVELOPMENTAL TOXICITY: Not available.
    Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.

Section IV.        First Aid Measures    
    Eye Contact        Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15    
    minutes. Get medical attention.
    Skin Contact        In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing    
    before reuse. Thoroughly clean shoes before reuse. Get medical attention.
    If the victim is not breathing, perform mouth-to-mouth resuscitation. Loosen tight clothing such as a collar, tie, belt or
    Inhalation
    waistband. If breathing is difficult, oxygen can be administered. Seek medical attention if respiration problems do not
    improve.
    INDUCE VOMITING by sticking finger in throat. Lower the head so that the vomit will not reenter the mouth and throat.
    Ingestion
    Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth
    resuscitation. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the toxic
    material was ingested; the absence of such signs, however, is not conclusive.

Section V.        Fire and Explosion Data    
    Not available.
    Combustible.        Auto-Ignition    
    Flammability
    Flash Points        Flammable Limits        Not available.    
    76°C (168.8°F).
    These products are toxic carbon oxides (CO, CO2), sulfur oxides (SOx).
    Combustion Products
    Fire Hazards
    Not available.
    Risks of explosion of the product in presence of mechanical impact: Not available.
    Explosion Hazards
    Risks of explosion of the product in presence of static discharge: Not available.
    Fire Fighting Media
    SMALL FIRE: Use DRY chemical powder.
    LARGE FIRE: Use water spray, fog or foam. DO NOT use water jet.
    and Instructions
    Consult with local fire authorities before attempting large scale fire-fighting operations.
    Continued on Next Page
    Furfuryl Isopropyl Sulfide

Section VI.        Accidental Release Measures    
    Spill Cleanup        Irritating material. Combustible material. Air sensitive material.    
    Keep away from heat. Mechanical exhaust required. Stop leak if without risk. Absorb with an inert material and put the
    Instructions
    spilled material in an appropriate waste disposal. Consult federal, state, and/or local authorities for assistance on disposal.

Section VII. Handling and Storage
    Handling and Storage        IRRITANT. COMBUSTIBLE. AIR SENSITIVE. STORE UNDER ARGON. Keep away from heat. Mechanical exhaust    
    required. Avoid excessive heat and light. Do not breathe gas/fumes/ vapor/spray.
    Information

Section VIII. Exposure Controls/Personal Protection
    Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective
    Engineering Controls
    threshold limit value. Ensure that eyewash station and safety shower is proximal to the work-station location.
    Splash goggles. Lab coat. Vapor respirator. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a
    Personal Protection
    specialist BEFORE handling this product. Be sure to use a MSHA/NIOSH approved respirator or equivalent.
    Not available.
    Exposure Limits

Section IX. Physical and Chemical Properties
    Physical state @ 20°C        Liquid. (Clear. Colorless - very pale        Solubility    
    Not available.
    yellow.)
    1.02 (water=1)
    Specific Gravity
    Molecular Weight        156.24        Partition Coefficient        Not available.    
    Boiling Point        80°C (176°F) @ 12 mmHg        Vapor Pressure        Not available.    
    Melting Point        Not available.        Vapor Density        Not available.    
    1.50        Not available.    
    Refractive Index        Volatility    
    Critical Temperature        Not available.        Odor        Garlic-like.    
    Not available.        Not available.    
    Viscosity        Taste    

Section X.        Stability and Reactivity Data    
    Stability    
This material is stable if stored under proper conditions. (See Section VII for instructions)    
    Conditions of Instability        Avoid excessive heat and light.    
    Incompatibilities        Reactive with strong oxidizing agents, strong alkalis (bases).    

Section XI. Toxicological Information
    RTECS Number        Not available.    
    Eye Contact. Ingestion. Inhalation.
    Routes of Exposure
    Not available.
    Toxicity Data
    CARCINOGENIC EFFECTS : Not available.
    Chronic Toxic Effects
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    DEVELOPMENTAL TOXICITY: Not available.
    Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.
    Acute Toxic Effects        Irritating to eyes and skin on contact. Inhalation causes irritation of the lungs and respiratory system. Inflammation of the eye    
    is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening, or,
    occasionally, blistering.
    Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.

Section XII.        Ecological Information    
    Not available.
    Ecotoxicity
    Not available.
    Environmental Fate
    Continued on Next Page
    Furfuryl Isopropyl Sulfide

Section XIII. Disposal Considerations
    Waste Disposal        Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a    
    combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all
    federal, state and local regulations when disposing of the substance.

Section XIV. Transport Information
    Not a DOT controlled material (United States).
    DOT Classification
    PIN Number        Not applicable.    
    Proper Shipping Name        Not applicable.    
    Packing Group (PG)        Not applicable.    
    DOT Pictograms

Section XV. Other Regulatory Information and Pictograms
    TSCA Chemical Inventory        This compound is ON the EPA Toxic Substances Control Act (TSCA) inventory list.    
    (EPA)
    WHMIS Classification        CLASS B-3: Combustible liquid with a flash point between 37.8°C (100°F) and 93.3°C (200°F).    
    On DSL.
    (Canada)
    EINECS Number (EEC)        Not available.    
    EEC Risk Statements        R36/37/38- Irritating to eyes, respiratory system and skin.    


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220