Recommended Suppliersmore
N-(butoxymethyl)prop-2-enamide 1852-16-0 MSDS
  N-(Butoxymethyl)acrylamide (stabilized with MEHQ) Revision number: 1
  SAFETY DATA SHEET

Section 1. BASE INFORMATION
  Product name:        N-(Butoxymethyl)acrylamide (stabilized with MEHQ)    

  Revision number:        1    

Section 2. HAZARDS IDENTIFICATION
  Classification of the GHS
  PHYSICAL HAZARDS
  Flammable liquids        Category 4    
  HEALTH HAZARDS
  Acute toxicity (Oral)        Category 4    
    Not classified
  ENVIRONMENTAL HAZARDS
  GHS label elements
  Pictograms or hazard symbols
  Signal word        Warning    
  Hazard statement        Combustible liquid    
    Harmful if swallowed
  Precautionary statements
  [Prevention]        Keep away from flames and hot surfaces.    
    Do not eat, drink or smoke when using this product.
    Wash hands thoroughly after handling.
    Wear protective gloves and eye/face protection.
  [Response]        IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.    
    Rinse mouth.
  [Storage]        Store in a well-ventilated place. Keep cool.    
    Dispose of contents/container through a waste management company authorized by
  [Disposal]
    the local government
    May cause polimerization.
  Other hazards which do not
  result in classification

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Component(s):        N-(Butoxymethyl)acrylamide (stabilized with MEHQ)    
  Percent:        >96.0%(T)    
  CAS Number:        1852-16-0    
  Chemical Formula:        C8H15NO2    
  N-(Butoxymethyl)acrylamide (stabilized with
  MEHQ)

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Get medical advice/attention if you feel unwell.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Rinse skin with    
    water/shower. If skin irritation or rash occurs: Get medical advice/attention.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing. If eye irritation persists: Get medical
    advice/attention.
  Ingestion:        Call a POISON CENTER or doctor/physician if you feel unwell. Rinse mouth.    
    A rescuer should wear personal protective equipment, such as rubber gloves and air-
  Protection of first-aiders:
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, carbon dioxide.    
  media:
  Extinguishing media not to Water (It may scatter and spread fire.)
  be used:
  Specific hazards:        This substance may polimerize explosively when heated or involved in a fire.    
    Container may explode when heated. Combat fire from a sheltered position.
    Take care as it may decompose upon combustion or in high temperatures to
    generate poisonous fume.
  Specific methods:        Fire-extinguishing work is done from the windward and the suitable fire-extinguishing    
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
    spraying with water. Eliminate all ignition sources if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions,        Use personal protective equipment. Keep people away from and upwind of spill/leak.    
  protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
  emergency procedures: around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Absorb spilled material in dry sand or inert absorbent before recovering it into a
  containment and cleaning covered container. In case of large amount of spillage, contain a spill by bunding.
  up: Adhered or collected material should be promptly disposed of, in accordance with
    appropriate laws and regulations.
  Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
  hazards:        case of a fire. Use spark-proof tools and explosion-proof equipment.    

Section 7. HANDLING AND STORAGE
  Handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent generation of vapor or mist. Keep away from flames and hot surfaces. Take
    measures to prevent the build up of electrostatic charge. Use explosion-proof
    equipment. Wash hands and face thoroughly after handling.
    Use a closed system, ventilation.
    Avoid contact with skin, eyes and clothing.
  Advice on safe handling:
  Storage
  Storage conditions:        Keep container tightly closed. Store in a cool, dark and well-ventilated place.    
    Store away from incompatible materials such as oxidizing agents.
    Law is followed.
  Packaging material:

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust as possible so that workers should not be    
    exposed directly. Also install safety shower and eye bath.
  N-(Butoxymethyl)acrylamide (stabilized with
  MEHQ)

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Personal protective equipment
  Respiratory protection: Vapor respirator. Follow local and national regulations.
  Hand protection:        Protective gloves.    
    Safety glasses. A face-shield, if the situation requires.
  Eye protection:
  Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Liquid    
    clear
  Form:
  Color:        Colorless - Very pale yellow    
    No data available
  Odor:
  pH: No data available
  Melting point/freezing point:No data available
  Boiling Point/Range:        No data available    
  Flash Point:        78°C    
  Explosive limits
    No data available
  Lower:
  Upper:        No data available    
    0.98
  Density:
  Solubility:        No data available    

Section 10. STABILITY AND REACTIVITY
  Stability:        Polymerization may occur under the influences of heat, light or upon contact with    
    polymelization initiator such as peroxides etc.
  Reactivity:        No special reactivity has been reported.    
  Incompartible materials: oxidizing agents
  Hazardous Decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx)
  Products:

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        orl-rat LD50:1030 mg/kg    
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
    No data available
  NTP =
  Reproductive toxicity:        No data available    
    AS3450000
  RTECS Number:

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
  Fish:        No data available    
  Crustacea:        No data available    
  Algae:        No data available    
  Persistence / degradability: 76 % (by BOD), 95 % (by TOC), 100 % (by HPLC)
  Bioaccumulative        No data available    
  potential(BCF):
  Mobillity in soil
  log Pow:        No data available    
  Soil adsorption (Koc):        No data available    
  Henry's Law        No data available    
  constant(PaM3/mol):
  N-(Butoxymethyl)acrylamide (stabilized with
  MEHQ)

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
    incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
    disposing of the substance.

Section 14. TRANSPORT INFORMATION
  Hazards Class:        Does not correspond to the classification standard of the United Nations    
    Not Listed
  UN-No:

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26,
  2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
    prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220