Recommended Suppliersmore
(R)-6,6'-Dibromo-2,2'-bis(methoxymethoxy)-1,1'-binaphthyl 179866-74-1 MSDS

Section 1: Product Identification
   Chemical Name:       (R)-(+)-6,6'-Dibromo-2,2'-bis(methoxymethoxy)-1,1'-binaphthyl, min. 98%    
   CAS Registry Number:       179866-74-1    
   Formula:       C24H20Br2O4    
   EINECS Number:       none    
   Chemical Family:       organic alcohol    
   Synonym:       R-(+)-6,6'-Dibromo-2,2'-bis-methoxymethoxy-[1,1']binaphthalenyl    

Section 2: Composition and Information on Ingredients
   Ingredient       CAS Number       Percent       ACGIH (TWA)       OSHA (PEL)    
   Title compound       179866-74-1       100%       no data       no data    

Section 3: Hazards Identification
   Emergency Overview:       Irritating to eyes and skin. May be harmful if swallowed or inhaled.    
   Primary Routes of Exposure:       Ingestion    
   Eye Contact:       Causes mild irritation of the eyes.    
   Skin Contact:       Causes slight irritation of the skin.    
   Inhalation:       Inhalation of dust may lead to irritation of the respiratory tract.    
   Ingestion:       No information is available on the physiological effects of ingestion. May be harmful if swallowed.    
   Acute Health Affects:       Irritating to eyes and skin. May be harmful if swallowed or inhaled.    
   Chronic Health Affects:       No information available on long-term chronic effects.    
   NTP:       No    
   IARC:       No    
   OSHA:       No    

SECTION 4: First Aid Measures
   Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
   Eye Exposure:
   assistance in keeping their eye lids open. Get immediate medical attention.
   Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
   Skin Exposure:
   irritation persists.
   Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in
   breathing, coughing, wheezing or pain. In such cases seek immediate medical assistance.
   Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
   vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
   Flash Point:       no data    
   Autoignition Temperature:       no data    
   Explosion Limits:       no data    
   Extinguishing Medium:       dry chemical, carbon dioxide, water or foam.    
   If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure
   Special Fire Fighting Procedures:
   self- contained breathing apparatus and full protective clothing.
   Hazardous Combustion and       If involved in a fire this material may emit irritating fumes of hydrogen bromide.    
   Decomposion Products:
   Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
   Small spills can be mixed with vermiculite, sodium carbonate or other suitable non combustible adsorbent and
   Spill and Leak Procedures:
   swept up.

SECTION 7: Handling and Storage
   Handling and Storage:       Store in a tightly sealed container. Keep away from heat and direct sunlight.    

SECTION 8: Exposure Controls and Personal Protection
   Eye Protection:       Always wear approved safety glasses when handling a chemical substance in the laboratory.    
   Skin Protection:       Wear protective clothing and gloves. Consult with glove manufacturer to determine the proper type of glove.    
   Ventilation:       Material may form a fine dust. If possible, handle the material in an efficient fume hood.    
   If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators
   requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
   Ventilation:       Material may form a fine dust. If possible, handle the material in an efficient fume hood.    
   Additional Protection:       No additional protection required.    

SECTION 9: Physical and Chemical Properties
   Color and Form:       white powder    
   Molecular Weight:       532.22    
   Melting Point:       133°    
   Boiling Point:       no data    
   Vapor Pressure:       no data    
   Specific Gravity:       no data    
   Odor:       not determined    
   Solubility in Water:       slightly soluble    

SECTION 10: Stability and Reactivity
   Stability:       air and moisture stable    
   Hazardous Polymerization:       no hazardous polymerization    
   Conditions to Avoid:       none    
   Incompatibility:       oxidizing agents    
   Decomposition Products:       carbon dioxide, carbon monoxide, organic fumes, and hydrogen bromide.    

SECTION 11: Toxicological Information
   RTECS Data:       No information available in the RTECS files.    
   Carcinogenic Effects:       no data    
   Mutagenic Effects:       no data    
   Tetratogenic Effects:       no data    

SECTION 12: Ecological Information
   Ecological Information:       No information available    

SECTION 13: Disposal Considerations
   Disposal:       Dispose of according to local, state and federal regulations.    

SECTION 14: Transportation
   Shipping Name (CFR):       Non-hazardous    
   Hazard Class (CFR):       NA    
   Additional Hazard Class (CFR):       NA    
   Packaging Group (CFR):       NA    
   UN ID Number (CFR):       NA    
   Shipping Name (IATA):       Non-hazardous    
   Hazard Class (IATA):       NA    
   Additional Hazard Class (IATA):       NA    
   Packaging Group (IATA):       NA    
   UN ID Number (IATA):       NA    

SECTION 15: Regulatory Information
   TSCA:       Not listed in the TSCA inventory.    
   SARA (Title 313):       Title compound not listed.    
   Second Ingredient:       none    


Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220