Recommended Suppliersmore
Panthenol 16485-10-2 MSDS

Section 1. Chemical Product and Company Identification
    Common Name/
    Trade Name

Section 4. First Aid Measures
    Eye Contact        Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at    
    least 15 minutes. Cold water may be used. Get medical attention if irritation occurs.
    Skin Contact        Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops.    
    Cold water may be used.
    Serious Skin Contact        Not available.    
    Inhalation        If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get    
    medical attention.
    Serious Inhalation        Not available.    
    Ingestion        Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an    
    unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight
    clothing such as a collar, tie, belt or waistband.
    Serious Ingestion        Not available.    

Section 5. Fire and Explosion Data
    Flammability of the Product May be combustible at high temperature.
    Auto-Ignition Temperature Not available.
    Flash Points        Not available.    
    Flammable Limits        Not available.    
    These products are carbon oxides (CO, CO2), nitrogen oxides (NO, NO2...).
    Products of Combustion
    Fire Hazards in Presence of Slightly flammable to flammable in presence of heat.
    Various Substances        Non-flammable in presence of shocks.    
    Explosion Hazards in Presence Slightly explosive in presence of open flames and sparks.
    of Various Substances        Non-explosive in presence of shocks.    
    Fire Fighting Media        SMALL FIRE: Use DRY chemical powder.    
    and Instructions        LARGE FIRE: Use water spray, fog or foam. Do not use water jet.    
    Special Remarks on        As with most organic solids, fire is possible at elevated temperatures    
    Fire Hazards
    Special Remarks on Explosion Fine dust dispersed in air in sufficient concentrations, and in the presences of an ignition source is a potential dust
    Hazards        explosion hazard.    

Section 6. Accidental Release Measures
    Small Spill        Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by    
    spreading water on the contaminated surface and dispose of according to local and regional authority
    Large Spill
    Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water
    on the contaminated surface and allow to evacuate through the sanitary system.

Section 7. Handling and Storage
    Precautions        Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the    
    residue under a fume hood. Ground all equipment containing material. Do not breathe dust.
    Storage        Keep container tightly closed. Keep container in a cool, well-ventilated area. Hygroscopic    

Section 8. Exposure Controls/Personal Protection
    Engineering Controls        Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below    
    recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
    airborne contaminants below the exposure limit.
    Personal Protection
    Safety glasses. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
    Personal Protection in Case of Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used
    a Large Spill        to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist    
    BEFORE handling this product.
    Exposure Limits        Not available.    

Section 9. Physical and Chemical Properties
    Physical state and appearance Solid. (Crystalline powder.)        Odor        Characteristic. (Slight.)    
    Taste        Not available.    
    Molecular Weight        205.25 g/mole    
    Color        White. Off-white.    
    pH (1% soln/water)        Not available.    
    Boiling Point        Not available.    
    Melting Point        64.5°C (148.1°F) - 69 C    
    Critical Temperature        Not available.    
    Not available.
    Specific Gravity
    Vapor Pressure        Not applicable.    
    Vapor Density        Not available.    
    Volatility        Not available.    
    Odor Threshold        Not available.    
    Not available.
    Water/Oil Dist. Coeff.
    Ionicity (in Water)        Not available.    
    See solubility in water.
    Dispersion Properties
    Solubility        Easily soluble in cold water, hot water.    
    Soluble in ethanol and propylene glycol

Section 10. Stability and Reactivity Data
    Stability        The product is stable.    
    Instability Temperature        Not available.    
    Conditions of Instability        Excess heat, incompatible materials    
    Incompatibility with various        Not available.    
    Corrosivity        Non-corrosive in presence of glass.    
    Hygroscopic; keep container tightly closed.
    Special Remarks on
    Not available.
    Special Remarks on
    Polymerization        Will not occur.    

Section 11. Toxicological Information
    Routes of Entry        Inhalation. Ingestion.    
    Toxicity to Animals        LD50: Not available.    
    LC50: Not available.
    Chronic Effects on Humans Not available.
    Other Toxic Effects on
    Slightly hazardous in case of skin contact (irritant), of ingestion, of inhalation.
    Special Remarks on        LD50 [Mouse] - Route: Intraperitoneal; Dose: 10100 mg/kg    
    Toxicity to Animals
    Special Remarks on        Not available.    
    Chronic Effects on Humans
    Special Remarks on other        Acute Potential Health Effects:    
    Toxic Effects on Humans        Skin: May cause skin irritation.    
    Eyes: May cause eye irritation.
    Inhalation: May cause respiratory tract irritation.
    Ingestion: Expected to be a low ingestion hazard. However, ingestion of large amounts may cause
    gastrointestinal tract irritation with nausea, vomiting and diarrhea.

Section 12. Ecological Information
    Ecotoxicity        Not available.    
    Not available.
    BOD5 and COD
    Possibly hazardous short term degradation products are not likely. However, long term degradation products may
    Products of Biodegradation
    Toxicity of the Products        The product itself and its products of degradation are not toxic.    
    of Biodegradation
    Special Remarks on the        Not available.    
    Products of Biodegradation

Section 13. Disposal Considerations
    Waste Disposal        Waste must be disposed of in accordance with federal, state and local environmental    
    control regulations.

Section 14. Transport Information
    DOT Classification        Not a DOT controlled material (United States).    
    Identification        Not applicable.    
    Not applicable.
    Special Provisions for
    DOT (Pictograms)

Section 15. Other Regulatory Information and Pictograms
    TSCA 8(b) inventory: Panthenol
    Federal and State
    Proposition 65
    Other Regulations        EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances.    
    WHMIS (Canada) Not controlled under WHMIS (Canada).
    Other Classifications
    DSCL (EEC)        This product is not classified according Not applicable.    
    to the EU regulations.
    Health Hazard
    HMIS (U.S.A.)        1 National Fire Protection    
    1 Flammability
    1 Association (U.S.A.)
    Fire Hazard
    1 0 Reactivity
    Specific hazard
    Personal Protection
    WHMIS (Canada)
    DSCL (Europe)
    TDG (Canada)
    ADR (Europe)
    Protective Equipment
    Lab coat.
    Dust respirator. Be sure to use an
    approved/certified respirator or


Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220