Recommended Suppliersmore
4-Butylphenol
CAS No.: 1638-22-8
Synonyms:
Formula: C10H14O
Exact Mass: 150.10400
Molecular Weight: 150.21800
PSA: 20.23000
LogP: 2.73480
Reference Price: $1,468/kg Inquiry Now
4-Butylphenol 1638-22-8 MSDS
Name: 4-Butylphenol 99% (gc) Material Safety Data Sheet
Synonym: Phenol, p-butyl-; p-Butylphenol; p-Hydroxybutylbenzene; 4-Butylphenol; 4-n-Butylphenol; p-n-Butylphenol; 1-Hydroxy-4-n-butylbenzene
CAS: 1638-22-8
Section 1 - Chemical Product   MSDS Name:4-Butylphenol 99% (gc) Material Safety Data Sheet
Synonym:Phenol, p-butyl-; p-Butylphenol; p-Hydroxybutylbenzene; 4-Butylphenol; 4-n-Butylphenol; p-n-Butylphenol; 1-Hydroxy-4-n-butylbenzene

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
1638-22-8 p-Butylphenol 99.0 216-672-5
Hazard Symbols: XN
Risk Phrases: 34 36/37/38 42/43

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Causes burns. Irritating to eyes, respiratory system and skin. May cause sensitization by inhalation and skin contact.Corrosive.
Potential Health Effects
Eye:
Causes eye irritation. Causes eye burns. May cause chemical conjunctivitis and corneal damage. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
May cause sensitization by skin contact.
Ingestion:
May cause severe and permanent damage to the digestive tract. May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May cause systemic effects.
Inhalation:
Causes respiratory tract irritation. Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. May cause systemic effects. May cause respiratory sensitization.
Chronic:
Effects may be delayed.

Section 4 - FIRST AID MEASURES
  Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Provide ventilation.

Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Use with adequate ventilation. Wash clothing before reuse. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.
Exposure Limits CAS# 1638-22-8: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 270 deg C @ 760.00mm Hg
Freezing/Melting Point: 22 deg C
Autoignition Temperature: Not available.
Flash Point: 121 deg C ( 249.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density:
Molecular Formula: C10H14O
Molecular Weight: 150.22

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
None reported.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 1638-22-8: SJ8922500 LD50/LC50:
Not available.
Carcinogenicity:
p-Butylphenol - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
  Other No information available.

Section 13 - DISPOSAL CONSIDERATIONS
  Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION
 
IATA
Shipping Name: ALKYLPHENOLS, LIQUID, N.O.S.
Hazard Class: 8
UN Number: 3145
Packing Group: III
IMO
Shipping Name: ALKYLPHENOLS, LIQUID, N.O.S.
Hazard Class: 8
UN Number: 3145
Packing Group: III
RID/ADR
Shipping Name: ALKYLPHENOLS, LIQUID, N.O.S.
Hazard Class: 8
UN Number: 3145
Packing group: III

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 34 Causes burns.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 42/43 May cause sensitization by inhalation and
skin contact.
Safety Phrases:
S 22 Do not breathe dust.
S 24 Avoid contact with skin.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 1638-22-8: No information available.
Canada
CAS# 1638-22-8 is listed on Canada's DSL List.
CAS# 1638-22-8 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1638-22-8 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220