Recommended Suppliersmore
4-Ethoxybenzoyl chloride 16331-46-7 MSDS
  4-Ethoxybenzoyl Chloride      Revision number: 6    
  SAFETY DATA SHEET

Section 1. IDENTIFICATION
  Product name:        4-Ethoxybenzoyl Chloride    
    
  Revision number:        6    

Section 2. HAZARDS IDENTIFICATION
  GHS classification
  PHYSICAL HAZARDS
    Category 1
  Corrosive to metals
  HEALTH HAZARDS
    Category 1B
  Skin corrosion/irritation
  Serious eye damage/eye irritation        Category 1    
    Not classified
  ENVIRONMENTAL HAZARDS
  GHS label elements, including precautionary statements
  Pictograms or hazard symbols
  Signal word        Danger    
  Hazard statements        May be corrosive to metals    
    Causes severe skin burns and eye damage
  Precautionary statements:
  [Prevention]        Keep only in original container.    
    Do not breathe dust/fume/gas/mist/vapours/spray.
    Wash hands thoroughly after handling.
    Wear protective gloves/eye protection/face protection.
  [Response]        IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for    
    breathing.
    IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
    if present and easy to do. Continue rinsing.
    IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
    skin with water/shower.
    Wash contaminated clothing before reuse.
    Immediately call a POISON CENTER or doctor/physician.
    Absorb spillage to prevent material damage.
  [Storage]        Store locked up.    
  [Disposal]        Dispose of contents/container through a waste management company authorized by    
    the local government.
  4-Ethoxybenzoyl Chloride

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Components:        4-Ethoxybenzoyl Chloride    
  Percent:        >98.0%(GC)(T)    
  CAS Number:        16331-46-7    
  Chemical Formula:        C9H9ClO2    

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Immediately call a POISON CENTER or doctor/physician.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. Immediately call a POISON CENTER or doctor/physician.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing.Immediately call a POISON CENTER or
    doctor/physician.
  Ingestion:        Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT    
    induce vomiting.
  Protection of first-aiders:        A rescuer should wear personal protective equipment, such as rubber gloves and air-    
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, carbon dioxide.    
  media:
  Unsuitable extinguishing Water
  media:
  Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
  from the chemical:        generate poisonous fume.    
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Remove movable
    containers if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
    Use extra personal protective equipment (P3 filter respirator for toxic particles). Keep
  Personal precautions,
  protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should
  emergency procedures: be controlled around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
  containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
  up: appropriate laws and regulations.
  Prevention of secondary Do not allow contact with water. Remove all sources of ignition. Fire-extinguishing
  hazards:        devices should be prepared in case of a fire. Use spark-proof tools and explosion-    
    proof equipment.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent dispersion of dust. Wash hands and face thoroughly after handling.
    Use a closed system if possible. Use a local exhaust if dust or aerosol will be
    generated.
    Avoid contact with skin, eyes and clothing.
  Advice on safe handling:
    May develop pressure. Open carefully.
    Use corrosive resistant equipment.
  Conditions for safe storage, including any
  incompatibilities
  4-Ethoxybenzoyl Chloride

Section 7. HANDLING AND STORAGE
  Storage conditions:        Keep container tightly closed. Store in a cool and dark place.    
    Store under inert gas.
    Protect from moisture.
    Store locked up.
    Store away from incompatible materials such as oxidizing agents.
    Moisture-sensitive
  Packaging material:        Comply with laws. Keep only in original container.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust. Also install safety shower and eye bath.    
  Personal protective equipment
  Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator,
    etc. Use respirators approved under appropriate government standards and follow
    local and national regulations.
  Hand protection:        Impervious gloves.    
  Eye protection:        Safety goggles. A face-shield, if the situation requires.    
  Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Solid    
  Form:        Crystal- Lump    
  Colour:        White - Slightly pale yellow    
  Odour:        No data available    
  pH: No data available
  Melting point/freezing point:22°C (Freezing point)
    145°C/2.7kPa
  Boiling point/range:
  Flash point:        No data available    
  Flammability or explosive
  limits:
    No data available
  Lower:
  Upper:        No data available    
    No data available
  Relative density:
  Solubility(ies):
    No data available
  [Water]
  [Other solvents]        No data available    

Section 10. STABILITY AND REACTIVITY
  Chemical stability:        Stable under proper conditions.    
  Possibility of hazardous Decomposes in contact with water and liberates toxic gases.
  reactions:
  Conditions to avoid:        Moisture    
  Incompatible materials: Oxidizing agents, Bases
  Hazardous decomposition Carbon monoxide, Carbon dioxide, Hydrogen chloride
  products:

Section 11. TOXICOLOGICAL INFORMATION
    No data available
  Acute Toxicity:
  Skin corrosion/irritation: No data available
    No data available
  Serious eye
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
    No data available
  IARC =
  NTP =        No data available    
    No data available
  Reproductive toxicity:
  4-Ethoxybenzoyl Chloride

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
  Fish:        No data available    
  Crustacea:        No data available    
  Algae:        No data available    
  Persistence / degradability: No data available
  Bioaccumulative        No data available    
  potential(BCF):
  Mobility in soil
  Log Pow:        No data available    
    No data available
  Soil adsorption (Koc):
  Henry's Law        No data available    
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material
    with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
    Observe all federal, state and local regulations when disposing of the substance.

Section 14. TRANSPORT INFORMATION
  Hazards Class:        8: Corrosive.    
    3261
  UN-No:
  Proper shipping name:        Corrosive solid, acidic, organic, n.o.s.    
  Packing group:        II    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
    loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220