Recommended Suppliersmore
4-Iodobenzyl Bromide
CAS No.: 16004-15-2
Synonyms:
Formula: C7H6BrI
Exact Mass: 295.87000
Molecular Weight: 296.93100
PSA: 0.00000
LogP: 3.18610
Reference Price: $956/kg Inquiry Now
4-Iodobenzyl Bromide 16004-15-2 MSDS
  Revision number: 5
  4-Iodobenzyl Bromide
  SAFETY DATA SHEET

Section 1. IDENTIFICATION
    4-Iodobenzyl Bromide
  Product name:
    

    5
  Revision number:

Section 2. HAZARDS IDENTIFICATION
  GHS classification
  PHYSICAL HAZARDS
    Category 1
  Corrosive to metals
  HEALTH HAZARDS
    Category 1B
  Skin corrosion/irritation
    Category 1
  Serious eye damage/eye irritation
    Category 2
  Germ cell mutagenicity
    Not classified
  ENVIRONMENTAL HAZARDS
  GHS label elements, including precautionary statements
  Pictograms or hazard symbols
    Danger
  Signal word
    May be corrosive to metals
  Hazard statements
    Causes severe skin burns and eye damage
    Suspected of causing genetic defects
  Precautionary statements:
    Obtain special instructions before use.
  [Prevention]
    Do not handle until all safety precautions have been read and understood.
    Keep only in original container.
    Do not breathe dust/fume/gas/mist/vapours/spray.
    Wash hands thoroughly after handling.
    Wear protective gloves/eye protection/face protection.
    IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
  [Response]
    breathing.
    IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
    if present and easy to do. Continue rinsing.
    IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
    skin with water/shower.
    Wash contaminated clothing before reuse.
    Immediately call a POISON CENTER or doctor/physician.
    Absorb spillage to prevent material damage.
    Store locked up.
  [Storage]
  4-Iodobenzyl Bromide

Section 2. HAZARDS IDENTIFICATION
    Dispose of contents/container through a waste management company authorized by
  [Disposal]
    the local government.

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
    Substance
  Substance/mixture:
    4-Iodobenzyl Bromide
  Components:
    >95.0%(GC)
  Percent:
    16004-15-2
  CAS Number:
    α-Bromo-4-iodotoluene
  Synonyms:
    C7H6BrI
  Chemical Formula:

Section 4. FIRST AID MEASURES
    Remove victim to fresh air and keep at rest in a position comfortable for breathing.
  Inhalation:
    Immediately call a POISON CENTER or doctor/physician.
    Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
  Skin contact:
    soap and water. Immediately call a POISON CENTER or doctor/physician.
    Rinse cautiously with water for several minutes. Remove contact lenses, if present
  Eye contact:
    and easy to do. Continue rinsing.Immediately call a POISON CENTER or
    doctor/physician.
    Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT
  Ingestion:
    induce vomiting.
    A rescuer should wear personal protective equipment, such as rubber gloves and air-
  Protection of first-aiders:
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
    Dry chemical, foam, water spray, carbon dioxide.
  Suitable extinguishing
  media:
  Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
    generate poisonous fume.
  from the chemical:
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Remove movable
    containers if safe to do so.
    When extinguishing fire, be sure to wear personal protective equipment.
  Special protective
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
    Use extra personal protective equipment (P3 filter respirator for toxic particles). Keep
  Personal precautions,
  protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should
  emergency procedures: be controlled around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
  containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
  up: appropriate laws and regulations.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
    Handling is performed in a well ventilated place. Wear suitable protective equipment.
  Technical measures:
    Prevent dispersion of dust. Wash hands and face thoroughly after handling.
    Use a closed system if possible. Use a local exhaust if dust or aerosol will be
    generated.
  Advice on safe handling: Avoid all contact!
    May develop pressure. Open carefully.
    Use corrosive resistant equipment.
  Conditions for safe storage, including any
  incompatibilities
  4-Iodobenzyl Bromide

Section 7. HANDLING AND STORAGE
    Keep container tightly closed. Store in a refrigerator.
  Storage conditions:
    Store under inert gas.
    Protect from moisture.
    Store locked up.
    Store away from incompatible materials such as oxidizing agents.
    Heat-sensitive, Light-sensitive, Moisture-sensitive
    Comply with laws. Keep only in original container.
  Packaging material:

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
    Install a closed system or local exhaust. Also install safety shower and eye bath.
  Engineering controls:
  Personal protective equipment
  Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator,
    etc. Use respirators approved under appropriate government standards and follow
    local and national regulations.
    Impervious gloves.
  Hand protection:
    Safety goggles. A face-shield, if the situation requires.
  Eye protection:
  Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
    Solid
  Physical state (20°C):
    Crystal- Powder
  Form:
    White - Slightly pale yellow
  Colour:
    No data available
  Odour:
  pH: No data available
  Melting point/freezing point:80°C
    No data available
  Boiling point/range:
    No data available
  Flash point:
  Flammability or explosive
  limits:
    No data available
  Lower:
    No data available
  Upper:
    No data available
  Relative density:
  Solubility(ies):
    No data available
  [Water]
  [Other solvents]
    Toluene
  Soluble:
    3.99
  Log Pow:

Section 10. STABILITY AND REACTIVITY
    Stable under proper conditions.
  Chemical stability:
  Possibility of hazardous No special reactivity has been reported.
  reactions:
  Incompatible materials: Oxidizing agents, Bases
  Hazardous decomposition Carbon monoxide, Carbon dioxide, Hydrogen Iodide, Hydrogen bromide
  products:

Section 11. TOXICOLOGICAL INFORMATION
    No data available
  Acute Toxicity:
  Skin corrosion/irritation: No data available
    No data available
  Serious eye
  damage/irritation:
    No data available
  Germ cell mutagenicity:
  Carcinogenicity:
    No data available
  IARC =
    No data available
  NTP =
    No data available
  Reproductive toxicity:
  4-Iodobenzyl Bromide

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
    No data available
  Fish:
    No data available
  Crustacea:
    No data available
  Algae:
  Persistence / degradability: No data available
    No data available
  Bioaccumulative
  potential(BCF):
  Mobility in soil
    3.99
  Log Pow:
    No data available
  Soil adsorption (Koc):
    No data available
  Henry's Law
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material
    with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
    Observe all federal, state and local regulations when disposing of the substance.

Section 14. TRANSPORT INFORMATION
    8: Corrosive.
  Hazards Class:
    3261
  UN-No:
    Corrosive solid, acidic, organic, n.o.s.
  Proper shipping name:
    II
  Packing group:

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
    loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220