Recommended Suppliersmore
N-BUTYRALDEHYDE 2,4-DINITROPHENYLHYDRAZONE 1527-98-6 MSDS

Section I.Chemical Product and Company Identification
    Chemical Name Butyraldehyde 2,4-Dinitrophenylhydrazone
    Portland OR
    Synonym        Not available.    
    Chemical Formula        C10H12N4O4    
    1527-98-6
    CAS Number

Section II.        Composition and Information on Ingredients    
    Toxicology Data
    Chemical Name        CAS Number Percent (%)        TLV/PEL    
    Butyraldehyde 2,4-Dinitrophenylhydrazone        1527-98-6        Min. 96.0 Not available.        Not available.    
    (HPLC,T)

Section III. Hazards Identification
    Acute Health Effects        Irritating to eyes and skin on contact. Inhalation causes irritation of the lungs and respiratory system. Inflammation of the    
    eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening, or,
    occasionally, blistering.
    Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.
    Chronic Health Effects        CARCINOGENIC EFFECTS : Not available.    
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    DEVELOPMENTAL TOXICITY: Not available.
    Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.

Section IV.        First Aid Measures    
    Eye Contact        Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15    
    minutes. Get medical attention.
    Skin Contact        In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing    
    before reuse. Thoroughly clean shoes before reuse. Get medical attention.
    If the victim is not breathing, perform mouth-to-mouth resuscitation. Loosen tight clothing such as a collar, tie, belt or
    Inhalation
    waistband. If breathing is difficult, oxygen can be administered. Seek medical attention if respiration problems do not
    improve.
    INDUCE VOMITING by sticking finger in throat. Lower the head so that the vomit will not reenter the mouth and throat.
    Ingestion
    Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth
    resuscitation. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the toxic
    material was ingested; the absence of such signs, however, is not conclusive.

Section V.        Fire and Explosion Data    
    Not available.
    Flammable.        Auto-Ignition    
    Flammability
    Flash Points        Flammable Limits        Not available.    
    Not available.
    These products are toxic carbon oxides (CO, CO2), nitrogen oxides (NO, NO2).
    Combustion Products
    Fire Hazards        Not available.    
    Risks of explosion of the product in presence of mechanical impact: Not available.
    Explosion Hazards
    Risks of explosion of the product in presence of static discharge: Not available.
    Fire Fighting Media
    Flammable solid.
    SMALL FIRE: Use DRY chemical powder.
    and Instructions
    LARGE FIRE: Use water spray or fog. Cool containing vessels with water jet in order to prevent pressure build-up,
    autoignition or explosion. Consult with local fire authorities before attempting large scale fire-fighting operations.
    Continued on Next Page
    Butyraldehyde 2,4-Dinitrophenylhydrazone

Section VI.        Accidental Release Measures    
    Spill Cleanup        Flammable material. Irritating material. Heat and shock sensitive material.    
    Stop leak if without risk. DO NOT touch spilled material. Use water spray curtain to divert vapor drift. Prevent entry into
    Instructions
    sewers, basements or confined areas; dike if needed. Eliminate all sources of ignition. Consult federal, state, and/or local
    authorities for assistance on disposal.

Section VII. Handling and Storage
    FLAMMABLE. IRRITANT. HEAT/SHOCK SENSITIVE. Keep away from heat. Mechanical exhaust required. Avoid excessive
    Handling and Storage
    heat and light. Do not breathe dust.
    Information
    Always store away from incompatible compounds such as oxidizing agents.

Section VIII. Exposure Controls/Personal Protection
    Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended
    Engineering Controls
    exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants
    below the exposure limit.
    Splash goggles. Lab coat. Dust respirator. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a
    Personal Protection
    specialist BEFORE handling this product. Be sure to use a MSHA/NIOSH approved respirator or equivalent.
    Exposure Limits        Not available.    

Section IX. Physical and Chemical Properties
    Solid. (Reddish-yellow crystalline powder.)        Solubility    
    Physical state @ 20°C        Not available.    
    Not available.
    Specific Gravity
    Molecular Weight        252.23        Partition Coefficient    
    LOG Pow: 2.06
    Boiling Point        Not available.        Vapor Pressure        Not applicable.    
    122°C (251.6°F)        Not available.    
    Melting Point        Vapor Density    
    Refractive Index        Not available.        Volatility        Not available.    
    Not available.        Not available.    
    Critical Temperature        Odor    
    Viscosity        Not available.        Taste        Not available.    

Section X.        Stability and Reactivity Data    

This material is stable if stored under proper conditions. (See Section VII for instructions)
    Stability
    Conditions of Instability        Avoid excessive heat and light.    
    Incompatibilities
    Reactive with oxidizing agents.

Section XI. Toxicological Information
    Not available.
    RTECS Number
    Eye Contact. Ingestion. Inhalation.
    Routes of Exposure
    Not available.
    Toxicity Data
    Chronic Toxic Effects        CARCINOGENIC EFFECTS : Not available.    
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    DEVELOPMENTAL TOXICITY: Not available.
    Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.
    Irritating to eyes and skin on contact. Inhalation causes irritation of the lungs and respiratory system. Inflammation of the eye
    Acute Toxic Effects
    is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening, or,
    occasionally, blistering.
    Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.

Section XII.        Ecological Information    
    Ecotoxicity        Not available.    
    Environmental Fate        Not available.    
    Continued on Next Page
    Butyraldehyde 2,4-Dinitrophenylhydrazone

Section XIII. Disposal Considerations
    Waste Disposal        Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a    
    combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all
    federal, state and local regulations when disposing of the substance.

Section XIV. Transport Information
    DOT CLASS 4.1: Flammable solid
    DOT Classification
    PIN Number
    Proper Shipping Name        Flammable solid, organic, n.o.s.    
    Packing Group (PG)        III    
    DOT Pictograms

Section XV. Other Regulatory Information and Pictograms
    TSCA Chemical Inventory        This product is NOT on the EPA Toxic Substances Control Act (TSCA) inventory. The following notices are required by 40    
    CFR 720.36 (C) for those products not on the inventory list:
    (EPA)
    (i) These products are supplied solely for use in research and development by or under the supervision of a technically
    qualified individual as defined in 40 CFR 720.0 et sec.
    (ii) The health risks of these products have not been fully determined. Any information that is or becomes available will be
    supplied on an MSDS sheet.
    WHMIS Classification        CLASS B-4: Flammable solid.    
    (Canada)
    EINECS Number (EEC)        Not available.    
    EEC Risk Statements        R10- Flammable.    
    R18- In use, may form flammable/explosive vapor-air mixture.
    R36/37/38- Irritating to eyes, respiratory system and skin.
    Not available.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220