Recommended Suppliersmore
2-BROMO-3,3,3-TRIFLUOROPROPENE 1514-82-5 MSDS
  2-Bromo-3,3,3-trifluoro-1-propene (stabilized with      Revision number: 1    
  Copper chip)
  SAFETY DATA SHEET

Section 1. BASE INFORMATION
  Product name:        2-Bromo-3,3,3-trifluoro-1-propene (stabilized with Copper chip)    
             
  Revision number:        1    

Section 2. HAZARDS IDENTIFICATION
  Classification of the GHS
    Not classified
  PHYSICAL HAZARDS
  HEALTH HAZARDS
    Category 2
  Germ cell mutagenicity
  ENVIRONMENTAL HAZARDS        Not classified    
  GHS label elements
  Pictograms or hazard symbols
    Danger
  Signal word
  Hazard statement        Suspected of causing genetic defects    
  Precautionary statements
  [Prevention]        Obtain special instructions before use.    
    Do not handle until all safety precautions have been read and understood.
    Use personal protective equipment as required.
    IF exposed or concerned: Get medical advice/attention.
  [Response]
  [Storage]        Store locked up.    
    Dispose of contents/container through a waste management company authorized by
  [Disposal]
    the local government

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Component(s):        2-Bromo-3,3,3-trifluoro-1-propene (stabilized with Copper chip)    
  Percent:        >97.0%(GC)    
    1514-82-5
  CAS Number:
  Chemical Formula:        C3H2BrF3    

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Get medical advice/attention.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. Get medical advice/attention.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Get medical advice/attention.
  Ingestion:        Get medical advice/attention.Rinse mouth.    
  with Copper chip)
  Protection of first-aiders: A rescuer should wear personal protective equipment, such as rubber gloves and air-
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, water spray, carbon dioxide.    
  media:
  Specific hazards:        Take care as it may decompose upon combustion or in high temperatures to    
    generate poisonous fume.
  Specific methods:        Fire-extinguishing work is done from the windward and the suitable fire-extinguishing    
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Remove movable
    containers if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions,        Use extra personal protective equipment (self-contained breathing apparatus). Keep    
  protective equipment and people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-
  emergency procedures: involved personnel should be controlled around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
  containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
  up: material should be promptly disposed of, in accordance with appropriate laws and
    regulations.

Section 7. HANDLING AND STORAGE
  Handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent generation of vapor or mist. Wash hands and face thoroughly after handling.
    Use a closed system if possible. Use a ventilation, local exhaust if vapor or aerosol
    will be generated.
  Advice on safe handling:        Avoid all contact!    
    A small amount of copper chip is added as a stabilizer. Separation such as filtration
    should be taken as necessary.
  Storage
  Storage conditions:        Keep container tightly closed. Store in a refrigerator.    
    Store under inert gas.
    Store locked up.
    Store away from incompatible materials such as oxidizing agents.
  Packaging material:        Law is followed.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust. Also install safety shower and eye bath.    
  Personal protective equipment
  Respiratory protection: Half or full facepiece respirator, self-contained breathing apparatus(SCBA), supplied
    air respirator, etc. Use respirators approved under appropriate government standards
    and follow local and national regulations.
  Hand protection:        Impervious gloves.    
  Eye protection:        Safety goggles. A face-shield, if the situation requires.    
  Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Liquid    
  Form:        clear    
  Color:        Colorless - Very pale yellow    
  Odor:        No data available    
  with Copper chip)

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  pH: No data available
  Melting point/freezing point:No data available
  Boiling Point/Range:        34 °C    
  Flash Point:        No data available    
  Explosive limits
    No data available
  Lower:
  Upper:        No data available    
    1.66
  Density:
  Solubility:        No data available    

Section 10. STABILITY AND REACTIVITY
  Stability:        Stable under proper conditions.    
  Reactivity:        No special reactivity has been reported.    
  Conditions to avoid:        Heat-sensitive, Air-sensitive    
  Incompartible materials: oxidizing agents
  Hazardous Decomposition Carbon monoxide, Carbon dioxide, Hydrogen fluoride, Hydrogen bromide
  Products:

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        No data available    
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
    No data available
  NTP =
  Reproductive toxicity:        No data available    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
  Fish:        No data available    
  Crustacea:        No data available    
  Algae:        No data available    
  Persistence / degradability: No data available
    No data available
  Bioaccumulative
  potential(BCF):
  Mobillity in soil
  log Pow:        No data available    
  Soil adsorption (Koc):        No data available    
  Henry's Law        No data available    
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. Observe all federal, state and local
    regulations when disposing of the substance.

Section 14. TRANSPORT INFORMATION
  Hazards Class:        Does not correspond to the classification standard of the United Nations    
  UN-No:        Not Listed    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26,
  2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
    prescribed.
  with Copper chip)


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220