Hunan HuaTeng Pharmaceutical C...Purity: 95%Lead Time: 3 Day
Jiangsu Yonghua Fine Chemical ...Purity: 99%Lead Time: 1 Day
HENAN QING'AN CHEMICAL HI-TECH...Purity: 98%Lead Time: 14 Day
Crescent Chemical Co., Inc.Purity: 95%Lead Time: 7 Day
Shandong Zibo Dingjin Chemical...Purity: 95%Lead Time: 14 Day
|Name:||2-Ethylhexanoic acid 99% Material Safety Data Sheet|
|Synonym:||Butylethylacetic aicd; 2-Butylbutanoic aicd; Clobuzarit alpha-Ethylcaproic acid; 2-Ethylcaproic aicd; 2-EHA; Ethylhexanoic acid; alpha-Ethylhexanoic acid; 2-Ethylhexoic acid; Ethylhexoic acid; 3-Heptanecarboxylic acid; Octanoic acid|
Synonym:Butylethylacetic aicd; 2-Butylbutanoic aicd; Clobuzarit alpha-Ethylcaproic acid; 2-Ethylcaproic aicd; 2-EHA; Ethylhexanoic acid; alpha-Ethylhexanoic acid; 2-Ethylhexoic acid; Ethylhexoic acid; 3-Heptanecarboxylic acid; Octanoic acid
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 63
Section 3 - HAZARDS IDENTIFICATION
Possible risk of harm to the unborn child.
Potential Health Effects
Causes eye irritation.
Causes skin irritation. A single prolonged skin exposure is not likely to result in the material being absorbed in harmful amounts.
May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
May cause respiratory tract irritation.
Prolonged or repeated skin contact may cause defatting and dermatitis. Possible risk of harm to the unborn child.
Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid immediately.
In case of contact, immediately flush skin with plenty of water.
Remove contaminated clothing and shoes. Get medical aid. Wash clothing before reuse.
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Use only with adequate ventilation. Avoid breathing vapor or mist.
Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower.
Exposure Limits CAS# 149-57-5: Personal Protective Equipment Eyes: Wear chemical splash goggles.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: clear, colorless
Odor: mild odor
Vapor Pressure: 0.03 mm Hg @ 20 deg C
Viscosity: 7.73 cps
Boiling Point: 228 deg C @ 760 mm Hg
Freezing/Melting Point: -59 deg C
Autoignition Temperature: 371 deg C ( 699.80 deg F)
Flash Point: 118 deg C ( 244.40 deg F)
Explosion Limits, lower: .80 vol %
Explosion Limits, upper: 6.00 vol %
Solubility in water: Slightly soluble.
Specific Gravity/Density: 0.903 g/ml @ 25C
Molecular Formula: C8H16O2
Molecular Weight: 144.21
Section 10 - STABILITY AND REACTIVITY
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatibilities with Other Materials:
Strong oxidizing agents, reducing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 149-57-5: MO7700000 LD50/LC50:
CAS# 149-57-5: Dermal, guinea pig: LD50 = 6300 uL/kg; Draize test, rabbit, eye: 20 mg Severe; Oral, rat: LD50 = 3 gm/kg; Skin, rabbit: LD50 = 1260 uL/kg.
Rabbit LD50 Skin; 1260 uL/kg = 1138 mg/kg.
6300 uL/kg = 5689 mg/kg.
(slight to moderate) was observed in 5 of 6 New Zealand white rabbits 4 hours after application of undiluted 2-ethylhexanoic acid.
2-Ethylhexanoic acid - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Other No information available.
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
R 63 Possible risk of harm to the unborn child.
S 36/37 Wear suitable protective clothing and
WGK (Water Danger/Protection)
CAS# 149-57-5: 1
CAS# 149-57-5 is listed on Canada's DSL List.
CAS# 149-57-5 is listed on Canada's Ingredient Disclosure List.
CAS# 149-57-5 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION