Recommended Suppliersmore
cinnamaldehyde 14371-10-9 MSDS
  trans-Cinnamaldehyde      Revision number: 1    
  SAFETY DATA SHEET

Section 1. BASE INFORMATION
  Product name:        trans-Cinnamaldehyde    

  Revision number:        1    

Section 2. HAZARDS IDENTIFICATION
  Classification of the GHS
  PHYSICAL HAZARDS        Not classified    
  HEALTH HAZARDS
    Category 2
  Skin corrosion/irritation
  Serious eye damage/eye irritation        Category 2A    
    Category 1
  Skin sensitization
  ENVIRONMENTAL HAZARDS        Not classified    
  GHS label elements
  Pictograms or hazard symbols
  Signal word        Warning    
  Hazard statement        Causes skin irritation    
    Causes serious eye irritation
    May cause an allergic skin reaction
  Precautionary statements
  [Prevention]        Avoid breathing.    
    Contaminated work clothing should not be allowed out of the workplace.
    Wash hands thoroughly after handling.
    Wear protective gloves/eye protection/face protection.
  [Response]        IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,    
    if present and easy to do. Continue rinsing.
    If eye irritation persists: Get medical advice/attention.
    IF ON SKIN: Gently wash with plenty of soap and water.
    If skin irritation or rash occurs: Get medical advice/attention.
    Wash contaminated clothing before reuse.

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Component(s):        trans-Cinnamaldehyde    
  Percent:        >98.0%(GC)    
  CAS Number:        14371-10-9    
    trans-Phenylacrolein , trans-Phenylacrylaldehyde
  Synonyms:
  Chemical Formula:        C9H8O    
  trans-Cinnamaldehyde

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Get medical advice/attention if you feel unwell.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. If skin irritation or rash occurs: Get medical advice/attention.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing. If eye irritation persists: Get medical
    advice/attention.
  Ingestion:        Get medical advice/attention if you feel unwell. Rinse mouth.    
    A rescuer should wear personal protective equipment, such as rubber gloves and air-
  Protection of first-aiders:
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, water spray, carbon dioxide.    
  media:
  Extinguishing media not to Solid streams of water
  be used:
  Specific methods:        Fire-extinguishing work is done from the windward and the suitable fire-extinguishing    
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Remove movable
    containers if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions,        Use personal protective equipment. Keep people away from and upwind of spill/leak.    
  protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
  emergency procedures: around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
  containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
  up: material should be promptly disposed of, in accordance with appropriate laws and
    regulations.

Section 7. HANDLING AND STORAGE
  Handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent generation of vapor or mist. Wash hands and face thoroughly after handling.
    Use a ventilation, local exhaust if vapor or aerosol will be generated.
  Advice on safe handling:        Avoid contact with skin, eyes and clothing.    
  Storage
  Storage conditions:        Keep container tightly closed. Store in a cool and dark place.    
    Store away from incompatible materials such as oxidizing agents.
  Packaging material:        Law is followed.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust as possible so that workers should not be    
    exposed directly. Also install safety shower and eye bath.
  Personal protective equipment
  Respiratory protection: Vapor respirator. Follow local and national regulations.
  Hand protection:        Protective gloves.    
  Eye protection:        Safety glasses. A face-shield, if the situation requires.    
  Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
    Liquid
  Physical state (20°C):
  Form:        clear    
  trans-Cinnamaldehyde

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Color:        Colorless - Yellow    
  Odor:        Aromatic    
  pH: No data available
  Melting point/freezing point:-8 °C
  Boiling Point/Range:        252 °C    
  Flash Point:        129°C    
  Explosive limits
    No data available
  Lower:
  Upper:        No data available    
    0.1kPa/76°C
  Vapor Pressure:
  Vapor Density:        4.6    
  Density:        1.05    
  Solubility:        Soluble in : Alcohol    
    Very slightly soluble in: Water
    Insoluble in: Ether
  log Pow =        1.9    

Section 10. STABILITY AND REACTIVITY
    Stable under proper conditions.
  Stability:
  Reactivity:        No special reactivity has been reported.    
  Incompartible materials: oxidizing agents, strong bases
  Hazardous Decomposition Carbon monoxide, Carbon dioxide
  Products:

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        orl-rat LD50:3350 mg/kg    
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: mnt-rat-orl 1100 mg/kg
    mtr-ham-fbr 10 nmol/L
  Carcinogenicity:
  IARC =        No data available    
  NTP =        No data available    
  Reproductive toxicity:        No data available    
  RTECS Number:        GD6476000    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
    No data available
  Fish:
  Crustacea:        No data available    
    No data available
  Algae:
  Persistence / degradability: No data available
    No data available
  Bioaccumulative
  potential(BCF):
  Mobillity in soil
  log Pow:        1.9    
    No data available
  Soil adsorption (Koc):
  Henry's Law        No data available    
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
    incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
    disposing of the substance.
  trans-Cinnamaldehyde

Section 14. TRANSPORT INFORMATION
  Hazards Class:        Does not correspond to the classification standard of the United Nations    
  UN-No:        Not Listed    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26,
  2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
    prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220