Recommended Suppliersmore
dodecamethylpentasiloxane
CAS No.: 141-63-9
Synonyms:
Formula: C12H36O4Si5
Exact Mass: 384.14600
Molecular Weight: 384.83900
PSA: 36.92000
LogP: 4.82800
Reference Price: $715/kg Inquiry Now
dodecamethylpentasiloxane 141-63-9 MSDS
Name: Dodecamethylpentasiloxane 97% Material Safety Data Sheet
Synonym: Silicone liquid
CAS: 141-63-9
Section 1 - Chemical Product   MSDS Name:Dodecamethylpentasiloxane 97% Material Safety Data Sheet
Synonym:Silicone liquid

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
141-63-9 Dodecamethylpentasiloxane 97 205-492-2
Hazard Symbols: XI
Risk Phrases: 36/37/38

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Low hazard for usual industrial handling.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
  Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible liquid and vapor.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Forms smooth, slippery surfaces on floors, posing an accident risk. Remove all sources of ignition.
Provide ventilation.

Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep away from heat and flame. Avoid breathing vapor or mist. When heated to temperatures above 150C in the presence of air, product can form formaldehyde vapors.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Storage under a nitrogen blanket has been recommended.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 141-63-9: Personal Protective Equipment Eyes: Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Liquid
Color: colorless
Odor: odorless
pH: Not available.
Vapor Pressure: < 1 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 91 deg C @ 3 mmHg
Freezing/Melting Point: -81 deg C
Autoignition Temperature: Not available.
Flash Point: 86 deg C ( 186.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Negligible.
Specific Gravity/Density: 0.88
Molecular Formula: C12H36O4Si5
Molecular Weight: 384.84

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable.
Conditions to Avoid:
Excess heat, exposure to flame.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, silicon dioxide, formaldehyde.
Hazardous Polymerization: Will not occur.

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 141-63-9: SB0970000 LD50/LC50:
Not available.
Oral LDLo, guinea pig: 50 g/kg.
Carcinogenicity:
Dodecamethylpentasiloxane - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
  Other No information available.

Section 13 - DISPOSAL CONSIDERATIONS
  Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION
 
IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 141-63-9: No information available.
Canada
CAS# 141-63-9 is listed on Canada's DSL List.
CAS# 141-63-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 141-63-9 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220