Zibo Wanchang Science&Technolo...Purity: 98%Lead Time: 14 Day
Zibo Tiandan Chemical Industry...Purity: >95%Lead Time: 14 Day
Yangzhou huayang chemical addi...Purity: 99%Lead Time: 2 Day
nan jing hua xue shi ji gu fen...Purity: 99.5%Lead Time: 7 Day
YiChang KAI XIANG CHEMICAL CO....Purity: 98%Lead Time: 14 Day
Section 1. Chemical Product and Company Identification
CARCINOGENIC EFFECTS: Not available.
Potential Chronic Health
MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available.
The substance may be toxic to lungs.
Repeated or prolonged exposure to the substance can produce target organs damage. Repeated exposure
of the eyes to a low level of dust can produce eye irritation. Repeated skin exposure can produce local skin
destruction, or dermatitis. Repeated inhalation of dust can produce varying degree of respiratory irritation or
Section 4. First Aid Measures
Eye Contact Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water
for at least 15 minutes. Cold water may be used. Get medical attention immediately.
Skin Contact In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing
contaminated clothing and shoes. Cover the irritated skin with an emollient. Cold water may be used.Wash
clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention immediately.
Serious Skin Contact Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek
immediate medical attention.
Inhalation If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Get medical attention immediately.
Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or
waistband. If breathing is difficult, administer oxygen. If the victim is not breathing, perform mouth-to-mouth
resuscitation. WARNING: It may be hazardous to the person providing aid to give mouth-to-mouth
resuscitation when the inhaled material is toxic, infectious or corrosive. Seek immediate medical attention.
Ingestion Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to
an unconscious person. If large quantities of this material are swallowed, call a physician immediately.
Loosen tight clothing such as a collar, tie, belt or waistband.
Serious Ingestion Not available.
Section 5. Fire and Explosion Data
Flammability of the Product Non-flammable.
Auto-Ignition Temperature Not applicable.
Flash Points Not applicable.
Flammable Limits Not applicable.
Products of Combustion Not available.
Fire Hazards in Presence of Not applicable.
Explosion Hazards in Risks of explosion of the product in presence of mechanical impact: Not available.
Presence of Various Risks of explosion of the product in presence of static discharge: Not available.
Fire Fighting Media Not applicable.
Special Remarks on
Special Remarks on Explosion Not available.
Section 6. Accidental Release Measures
Small Spill Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill Corrosive solid.
Stop leak if without risk. Do not get water inside container. Do not touch spilled material. Use water spray
assistance on disposal.
Section 7. Handling and Storage
Keep container dry. Do not ingest. Do not breathe dust. In case of insufficient ventilation, wear suitable
respiratory equipment. If ingested, seek medical advice immediately and show the container or the label.
Avoid contact with skin and eyes. Keep away from incompatibles such as oxidizing agents.
Storage Keep container tightly closed. Keep container in a cool, well-ventilated area. Hygroscopic
Section 8. Exposure Controls/Personal Protection
Engineering Controls Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels
below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep
exposure to airborne contaminants below the exposure limit.
Personal Protection Splash goggles. Synthetic apron. Dust respirator. Be sure to use an approved/certified respirator or
equivalent. Gloves (impervious).
Personal Protection in Case of Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be
a Large Spill used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a
specialist BEFORE handling this product.
Exposure Limits Not available.
Section 9. Physical and Chemical Properties
Physical state and appearance Solid. (Crystals solid. Crystalline solid.) Odor Odorless.
Color White to yellowish.
pH (1% soln/water)
Boiling Point Decomposition temperature: 200°C (392°F)
Melting Point 73°C (163.4°F) - 74 C.
Critical Temperature Not available.
Specific Gravity 1.651 (Water = 1)
Vapor Density Not available.
Odor Threshold Not available.
Water/Oil Dist. Coeff. Not available.
Ionicity (in Water)
Dispersion Properties See solubility in water.
Soluble in cold water.
Section 10. Stability and Reactivity Data
The product is stable.
Instability Temperature Not available.
Incompatible materials, water/moisture
Conditions of Instability
Incompatibility with various Reactive with oxidizing agents, metals, alkalis.
Special Remarks on Hygroscopic; keep container tightly closed.
Special Remarks on Not available.
Will not occur.
Section 11. Toxicological Information
Routes of Entry Inhalation. Ingestion.
Toxicity to Animals Acute oral toxicity (LD50): 1700 mg/kg [Mouse].
Chronic Effects on Humans May cause damage to the following organs: lungs.
Other Toxic Effects on Very hazardous in case of skin contact (irritant), of ingestion.
Humans Hazardous in case of skin contact (corrosive), of eye contact (corrosive), .
Special Remarks on Not available.
Toxicity to Animals
Special Remarks on Not available.
Chronic Effects on Humans
Special Remarks on other Acute Potential Health Effects:
Toxic Effects on Humans Skin: Corrosive. Causes severe irritation and burns.
Eyes: Corrosive. Causes severe irritation and burns. May cause corneal damage.
Inhalation: Causes respiratory tract and lung irritation and possible chemical burns to the upper respiratory
tract. Symptoms may include coughing, wheezing, and/or shortness of breath, laryngitis, inflammation,
edema, chemical pneumonitis, headache, nausea, vomiting.
Ingestion: Causes severe irritation and burns to the digestive/gastrointestinal tract.
Section 12. Ecological Information
BOD5 and COD Not available.
Products of Biodegradation Possibly hazardous short term degradation products are not likely. However, long term degradation
products may arise.
Toxicity of the Products The products of degradation are less toxic than the product itself.
Special Remarks on the Not available.
Products of Biodegradation
Section 13. Disposal Considerations
Waste Disposal Waste must be disposed of in accordance with federal, state and local environmental
Section 14. Transport Information
DOT Classification Class 8: Corrosive material
UNNA: 2834 : Phosphorous acid PG: III
Special Provisions for
Section 15. Other Regulatory Information and Pictograms
New Jersey: Phosphorous acid
Federal and State
TSCA 8(b) inventory: Phosphorous acid
California California prop. 65: This product contains the following ingredients for which the State of California has
Proposition 65 found to cause cancer which would require a warning under the statute: No products were found.
California prop. 65: This product contains the following ingredients for which the State of California has
found to cause birth defects which would require a warning under the statute: No products were found.
Other Regulations OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances (EINECS
Canada: Listed on Canadian Domestic Substance List (DSL).
China: Listed on National Inventory.
Japan: Listed on National Inventory (ENCS).
Korea: Listed on National Inventory (KECI).
Philippines: Listed on National Inventory (PICCS).
Australia: Listed on AICS.
WHMIS (Canada) CLASS E: Corrosive solid.
R22- Harmful if swallowed. S26- In case of contact with eyes, rinse
R35- Causes severe burns. immediately with plenty of water and seek
S36/37/39- Wear suitable protective clothing,
gloves and eye/face protection.
S45- In case of accident or if you feel unwell,
seek medical advice immediately (show the
label where possible).
HMIS (U.S.A.) 3 National Fire Protection
0 Association (U.S.A.)
3 0 Reactivity
Dust respirator. Be sure to use an
approved/certified respirator or
equivalent. Wear appropriate respirator
when ventilation is inadequate.
SECTION 16 - ADDITIONAL INFORMATION