Recommended Suppliersmore
CAS No.: 13446-09-8
Formula: H4INO3
Exact Mass: 192.92400
Molecular Weight: 192.94100
PSA: 57.61000
LogP: 0.79520
Reference Price: $559/kg Inquiry Now

  Product identifiers
    Product name        : Ammonium iodate    
    CAS-No.        : 13446-09-8    
  Relevant identified uses of the substance or mixture and uses advised against
    Identified uses        : Laboratory chemicals, Manufacture of substances    

  Classification of the substance or mixture
  Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
    Oxidizing solids (Category 2)
    Skin irritation (Category 2)
    Eye irritation (Category 2)
  Classification according to EU Directives 67/548/EEC or 1999/45/EC
    Contact with combustible material may cause fire. Irritating to eyes and skin.
  Label elements
  Labelling according Regulation (EC) No 1272/2008 [CLP]
    Signal word        Danger    
    Hazard statement(s)
    H272        May intensify fire; oxidiser.    
    H315        Causes skin irritation.    
    H319        Causes serious eye irritation.    
    Precautionary statement(s)
    P220        Keep/Store away from clothing/ combustible materials.    
    P305 + P351 + P338        IF IN EYES: Rinse cautiously with water for several minutes. Remove    
    contact lenses, if present and easy to do. Continue rinsing.
    Supplemental Hazard        none    
  According to European Directive 67/548/EEC as amended.
    Hazard symbol(s)
    R8        Contact with combustible material may cause fire.    
    R36/38        Irritating to eyes and skin.    
    S17        Keep away from combustible material.    
    S26        In case of contact with eyes, rinse immediately with plenty of water and    
    seek medical advice.
    S36        Wear suitable protective clothing.    
  Other hazards - none

    Formula        : H4INO3    
    Molecular Weight        : 192,94 g/mol    
    Component        Concentration    
  Ammonium iodate
    CAS-No.        13446-09-8        -    
    EC-No.        236-592-4    

  Description of first aid measures
  General advice
    Consult a physician. Show this safety data sheet to the doctor in attendance.
  If inhaled
    If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
  In case of skin contact
    Wash off with soap and plenty of water. Consult a physician.
  In case of eye contact
    Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
  If swallowed
    Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
  Most important symptoms and effects, both acute and delayed
    Nausea, Vomiting, Diarrhoea, Rash
  Indication of any immediate medical attention and special treatment needed
    no data available

  Extinguishing media
  Suitable extinguishing media
    Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
  Special hazards arising from the substance or mixture
    nitrogen oxides (NOx), Hydrogen iodide
  Advice for firefighters
    Wear self contained breathing apparatus for fire fighting if necessary.
  Further information
    Use water spray to cool unopened containers.

  Personal precautions, protective equipment and emergency procedures
    Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
    adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
  Environmental precautions
    Do not let product enter drains.
  Methods and materials for containment and cleaning up
    Sweep up and shovel. Contain spillage, and then collect with an electrically protected vacuum cleaner or
    by wet-brushing and place in container for disposal according to local regulations (see section 13). Keep
    in suitable, closed containers for disposal.
  Reference to other sections
    For disposal see section 13.

  Precautions for safe handling
    Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
    Provide appropriate exhaust ventilation at places where dust is formed.Keep away from sources of ignition
    - No smoking.Keep away from heat and sources of ignition.Normal measures for preventive fire protection.
  Conditions for safe storage, including any incompatibilities
    Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
    Air, light, and moisture sensitive.
  Specific end uses
    no data available

  Control parameters
  Components with workplace control parameters
  Exposure controls
  Appropriate engineering controls
    Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
    at the end of workday.
  Personal protective equipment
  Eye/face protection
    Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
    and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
  Skin protection
    Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
    (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
    contaminated gloves after use in accordance with applicable laws and good laboratory practices.
    Wash and dry hands.
    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
    the standard EN 374 derived from it.
  Body Protection
    impervious clothing, The type of protective equipment must be selected according to the
    concentration and amount of the dangerous substance at the specific workplace.
  Respiratory protection
    Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
    respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
    controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
    respirators and components tested and approved under appropriate government standards such
    as NIOSH (US) or CEN (EU).

  Information on basic physical and chemical properties
    a) Appearance        Form: Powder with lumps    
    b) Odour        no data available    
    c) Odour Threshold        no data available    
    d) pH        no data available    
    e) Melting point/freezing        Melting point/range: 150 °C - dec.    
    f) Initial boiling point and no data available
    boiling range
    g) Flash point        not applicable    
    h) Evaporation rate        no data available    
    i) Flammability (solid, gas) no data available
    j) Upper/lower        no data available    
    flammability or
    explosive limits
    k) Vapour pressure        no data available    
    l) Vapour density        no data available    
    m) Relative density        3,309 g/mL at 25 °C    
    n) Water solubility        no data available    
    o) Partition coefficient: n- no data available
    p) Autoignition        no data available    
    q) Decomposition        no data available    
    r) Viscosity        no data available    
    s) Explosive properties        no data available    
    t) Oxidizing properties        The substance or mixture is classified as oxidizing with the category 2.    
  Other safety information
    no data available

    no data available
  Chemical stability
    no data available
  Possibility of hazardous reactions
    no data available
  Conditions to avoid
    no data available
  Incompatible materials
    Strong reducing agents, Powdered metals, Incompatibility: mixtures of iodates with finely divided
    aluminum, arsenic, copper, carbon, phosphorous (red or white) sulfur; hydrides of alkali and alkaline earth
    metals; sulfides of antimony, arsenic, copper or tin, metal cyanides, thiocyanates or impure manganese
    dioxide may react violently or explosively, either spontaneously (especially in the presence of moisture) or
    on initiation by heat, friction impact, sparks, or addition of sulfuric acid
  Hazardous decomposition products
    Other decomposition products - no data available

  Information on toxicological effects
  Acute toxicity
    no data available
  Skin corrosion/irritation
    no data available
  Serious eye damage/eye irritation
    no data available
  Respiratory or skin sensitization
    no data available
  Germ cell mutagenicity
    no data available
    IARC:        No component of this product present at levels greater than or equal to 0.1% is identified as    
    probable, possible or confirmed human carcinogen by IARC.
  Reproductive toxicity
    no data available
  Specific target organ toxicity - single exposure
    no data available
  Specific target organ toxicity - repeated exposure
    no data available
  Aspiration hazard
    no data available
  Potential health effects
  Inhalation        May be harmful if inhaled. Causes respiratory tract irritation.    
  Ingestion        May be harmful if swallowed.    
  Skin        May be harmful if absorbed through skin. Causes skin irritation.    
  Eyes        Causes serious eye irritation.    
  Signs and Symptoms of Exposure
    Nausea, Vomiting, Diarrhoea, Rash
  Additional Information
    RTECS: Not available

    no data available
  Persistence and degradability
    no data available
  Bioaccumulative potential
    no data available
  Mobility in soil
    no data available
  Results of PBT and vPvB assessment
    no data available
  Other adverse effects
    no data available

  Waste treatment methods
    Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting
    as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal
    company. Contact a licensed professional waste disposal service to dispose of this material.
  Contaminated packaging
    Dispose of as unused product.

  UN number
    ADR/RID: 1479        IMDG: 1479        IATA: 1479    
  UN proper shipping name
    ADR/RID: OXIDIZING SOLID, N.O.S. (Ammonium iodate)
    IMDG: OXIDIZING SOLID, N.O.S. (Ammonium iodate)
    IATA:        Oxidizing solid, n.o.s. (Ammonium iodate)    
  Transport hazard class(es)
    ADR/RID: 5.1        IMDG: 5.1        IATA: 5.1    
  Packaging group
    ADR/RID: II        IMDG: II        IATA: II    
  Environmental hazards
    ADR/RID: yes        IMDG Marine pollutant: yes        IATA: no    
  Special precautions for user
    no data available

    This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
  Safety, health and environmental regulations/legislation specific for the substance or mixture
    no data available
  Chemical Safety Assessment
    no data available

  Further information
    Copyright 2012 Co. LLC. License granted to make unlimited paper copies for internal use
    The above information is believed to be correct but does not purport to be all inclusive and shall be
    used only as a guide. The information in this document is based on the present state of our knowledge
    and is applicable to the product with regard to appropriate safety precautions. It does not represent any
    guarantee of the properties of the product. Corporation and its Affiliates shall not be held
    liable for any damage resulting from handling or from contact with the above product. See
     and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220