Recommended Suppliersmore

Section 1: Product Identification
   Chemical Name:       Sodium aluminate, contains approx. 8% H2O (99.9%-Al)    
   CAS Registry Number:       1302-42-7    
   Formula:       NaAlO2    
   EINECS Number:       215-100-1    
   Chemical Family:       inorganic compound    
   Synonym:       Aluminum sodium oxide    

Section 2: Composition and Information on Ingredients
   Ingredient       CAS Number       Percent       ACGIH (TWA)       OSHA (PEL)    
   Title Compound       1302-42-7       90%       no data       no data    

Section 3: Hazards Identification
   Emergency Overview:       Corrosive to eyes, skin and respiratory tract. May be harmful if swallowed    
   Primary Routes of Exposure:       Ingestion, inhalation    
   Eye Contact:       Causes burns to the eyes.    
   Skin Contact:       Causes burns to the skin.    
   Inhalation:       Corrosive to the nose, mucous membranes and respiratory tract.    
   Ingestion:       No information on the physiological effects of ingestion.    
   Acute Health Affects:       Corrosive to skin, eyes and respiratory tract.    
   Chronic Health Affects:       No information available on long-term chronic effects.    
   NTP:       No    
   IARC:       No    
   OSHA:       No    

SECTION 4: First Aid Measures
   Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
   Eye Exposure:
   assistance in keeping their eye lids open. Get immediate medical attention.
   Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
   Skin Exposure:
   irritation persists.
   Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
   in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
   Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
   vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
   Flash Point:       not applicable    
   Autoignition Temperature:       none    
   Explosion Limits:       none    
   Extinguishing Medium:       none required    
   If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained
   Special Fire Fighting Procedures:
   breathing apparatus and full protective clothing.
   Hazardous Combustion and       None    
   Decomposion Products:
   Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
   Spill and Leak Procedures:       Small spills can be mixed with powdered sodium carbonate or ground limestone and swept up.    

SECTION 7: Handling and Storage
   Handling and Storage:       Store material in a tightly sealed bottle away from moisture.    

SECTION 8: Exposure Controls and Personal Protection
   Eye Protection:       Always wear approved safety glasses when handling a chemical substance in the laboratory.    
   Skin Protection:       Wear protective clothes and gloves. Consult with glove manufacturer to determine the proper type of glove.    
   Ventilation:       If possible, handle the material in an efficient fume hood.    
   In the absence of adequate ventilation a respirator should be worn. The use of a respiratory requires a
   Respirator Protection Program to be in compliance with 29 CFR 1910.134.
   Ventilation:       If possible, handle the material in an efficient fume hood.    
   Additional Protection:       No additional protection required.    

SECTION 9: Physical and Chemical Properties
   Color and Form:       white pwdr.    
   Molecular Weight:       81.97    
   Melting Point:       1800°    
   Boiling Point:       no data    
   Vapor Pressure:       no data    
   Specific Gravity:       no data    
   Odor:       none    
   Solubility in Water:       soluble    

SECTION 10: Stability and Reactivity
   Stability:       hygroscopic    
   Hazardous Polymerization:       no hazardous polymerization    
   Conditions to Avoid:       none    
   Incompatibility:       Active metals    
   Decomposition Products:       none    

SECTION 11: Toxicological Information
   RTECS Data:       No information available in the RTECS files.    
   Carcinogenic Effects:       none    
   Mutagenic Effects:       none    
   Tetratogenic Effects:       none    

SECTION 12: Ecological Information
   Ecological Information:       No information available    

SECTION 13: Disposal Considerations
   Disposal:       Dispose of according to local, state and federal regulations.    

SECTION 14: Transportation
   Shipping Name (CFR):       Sodium aluminate, solid    
   Hazard Class (CFR):       8    
   Additional Hazard Class (CFR):       NA    
   Packaging Group (CFR):       III    
   UN ID Number (CFR):       UN# 2812    
   Shipping Name (IATA):       Sodium aluminate, solid    
   Hazard Class (IATA):       8    
   Additional Hazard Class (IATA):       NA    
   Packaging Group (IATA):       III    
   UN ID Number (IATA):       UN# 2812    

SECTION 15: Regulatory Information
   TSCA:       Listed in the TSCA inventory.    
   SARA (Title 313):       Title compound not listed    
   Second Ingredient:       none    


Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220