Recommended Suppliersmore
pyrrolidine
CAS No.: 123-75-1
Synonyms:
Formula: C4H9N
Exact Mass: 71.07350
Molecular Weight: 71.12100
PSA: 12.03000
LogP: 0.69860
Reference Price: $632/20kg Inquiry Now
pyrrolidine 123-75-1 MSDS
Name: Pyrrolidine Material Safety Data Sheet
Synonym: Tetrahydropyrrole; tetramethylenimin
CAS: 123-75-1
Section 1 - Chemical Product   MSDS Name:Pyrrolidine Material Safety Data Sheet
Synonym:Tetrahydropyrrole; tetramethylenimin

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
123-75-1 Pyrrolidine 100.0 204-648-7
Hazard Symbols: XN F
Risk Phrases: 11 20/21/22

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Highly flammable. Harmful by inhalation, in contact with skin and if swallowed.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation. Vapors may cause dizziness or suffocation.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
  Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
  General Information:
Containers can build up pressure if exposed to heat and/or fire. As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Use water spray to keep fire-exposed containers cool. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. May be ignited by heat, sparks, and flame. Containers may explode when heated.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Use foam, dry chemical, or carbon dioxide. Do NOT get water inside containers. For large fires, use water spray, fog or alcohol-resistant foam. Cool containers with flooding quantities of water until well after fire is out.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Remove all sources of ignition. A vapor suppressing foam may be used to reduce vapors. Water spray may reduce vapor but may not prevent ignition in closed spaces.

Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels.
Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Liquid
Appearance: colourless
Odor: amine-like
pH: Not available.
Vapor Pressure: 128 mm Hg @39C
Viscosity: Not available.
Boiling Point: 88.5-89.0
Freezing/Melting Point: -63 deg C
Autoignition Temperature: Not applicable.
Flash Point: 3 deg C ( 37.40 deg F)
Explosion Limits, lower: 2.9
Explosion Limits, upper: 13.0
Decomposition Temperature:
Solubility in water: Miscible with water.
Specific Gravity/Density: 0.86
Molecular Formula: (CH2)4NH
Molecular Weight: 71.0697

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, incompatible materials, ignition sources.
Incompatibilities with Other Materials:
Benzaldehyde and propionic acid, oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 123-75-1: UX9650000 LD50/LC50:
CAS# 123-75-1: Inhalation, mouse: LC50 = 1300 mg/m3/2H; Oral, mouse: LD50 = 450 mg/kg; Oral, rat: LD50 = 300 mg/kg.
Carcinogenicity:
Pyrrolidine - Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
  Other No information available.

Section 13 - DISPOSAL CONSIDERATIONS
  Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.

Section 14 - TRANSPORT INFORMATION
 
IATA
Shipping Name: PYRROLIDINE
Hazard Class: 3
UN Number: 1922
Packing Group: II
IMO
Shipping Name: PYRROLIDINE
Hazard Class: 3
UN Number: 1922
Packing Group: II
RID/ADR
Shipping Name: PYRROLIDINE
Dangerous Goods Code: 3(22B)
UN Number: 1922

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN F
Risk Phrases:
R 11 Highly flammable.
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 123-75-1: 2
United Kingdom Occupational Exposure Limits
Canada
CAS# 123-75-1 is listed on Canada's DSL List.
CAS# 123-75-1 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 123-75-1: OEL-RUSSIA:STEL 0.1 mg/m3;Skin
US FEDERAL
TSCA
CAS# 123-75-1 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220