Wuhan Jadechem International T...Purity: 98%Lead Time: 14 Day
Chengdu Herbpurify CO.,LTDPurity: 98%Lead Time: 7 Day
Nanjing Zhi Bai Cui Biology Te...Purity: 98%Lead Time: 1 Day
Nanjing Caobenyuan Biotechnolo...Purity: 98%Lead Time: 1 Day
zhong hua he bei you xian gong...Purity: 99%Lead Time: 15 Day
|Name:||Anisaldehyde Material Safety Data Sheet|
|Synonym:||4-Methoxybenzaldehyde; Anisic aldehyde; p-Methoxybenzaldehyde; p-Formylanisole|
Synonym:4-Methoxybenzaldehyde; Anisic aldehyde; p-Methoxybenzaldehyde; p-Formylanisole
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 22 36/37/38
Section 3 - HAZARDS IDENTIFICATION
Harmful if swallowed. Irritating to eyes, respiratory system and skin.Air sensitive.
Potential Health Effects
May cause eye irritation.
May cause skin irritation. Prolonged or repeated contact may dry/defat the skin and cause irritation.
May cause irritation of the digestive tract. May be harmful if swallowed.
May cause respiratory tract irritation.
Laboratory experiments have resulted in mutagenic effects.
Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid.
In case of contact, flush skin with plenty of water. Remove contaminated clothing and shoes. Get medical aid if irritation develops and persists. Wash clothing before reuse.
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Use extinguishing media most appropriate for the surrounding fire.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Avoid breathing vapor or mist.
Do not store in direct sunlight. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Storage under a nitrogen blanket has been recommended.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 123-11-5: Personal Protective Equipment Eyes: Wear chemical splash goggles.
Wear appropriate protective gloves and clothing to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: colorless to slight yellow
Odor: sweetish odor
pH: Not available.
Vapor Pressure: 3.29E-002 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 248 - 249 deg C @ 760mmHg
Freezing/Melting Point: -1 deg C
Autoignition Temperature: 225 deg C ( 437.00 deg F)
Flash Point: 116 deg C ( 240.80 deg F)
Explosion Limits, lower: 1.4 vol %
Explosion Limits, upper: 5.3 vol %
Decomposition Temperature: >160 deg C
Solubility in water: Insoluble.
Specific Gravity/Density: 1.1190g/cm3
Molecular Formula: C8H8O2
Molecular Weight: 136.15
Section 10 - STABILITY AND REACTIVITY
Stable under normal temperatures and pressures.
Conditions to Avoid:
Prolonged exposure to air.
Incompatibilities with Other Materials:
Strong bases, strong oxidizing agents, strong reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 123-11-5: BZ2625000 LD50/LC50:
CAS# 123-11-5: Draize test, rabbit, skin: 500 mg/24H Moderate; Oral, mouse: LD50 = 1859 mg/kg; Oral, mouse: LD50 = 1858.6 mg/kg; Oral, rat: LD50 = 1510 mg/kg; Oral, rat: LD50 = 1847.8 mg/kg; Skin, rabbit: LD50 = >5 gm/kg.
p-Anisaldehyde - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.
Section 14 - TRANSPORT INFORMATION
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
R 22 Harmful if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
S 23 Do not inhale gas/fumes/vapour/spray.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 123-11-5: 1
CAS# 123-11-5 is listed on Canada's DSL List.
CAS# 123-11-5 is listed on Canada's Ingredient Disclosure List.
CAS# 123-11-5 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION