Yingcheng Wuhan Organic Materi...Purity: 98%Lead Time: 14 Day
Taicang Zhenhu Chemical Factor...Purity: 95%Lead Time: 14 Day
Xiamen Peony Perfume & Chemica...Purity: 95%Lead Time: 14 Day
Chengdu Alfa Biotechnology Co....Purity: 98%Lead Time: 7 Day
Hangzhou J&H Chemical Co., Ltd...Purity: 98%Lead Time: 3 Day
|Name:||3-Phenyl-1-propanol, 98% Material Safety Data Sheet|
|Synonym:||3-Phenylpropyl alcohol; (3-Hydroxypropyl)benzene; 1-Propanol, 3-phenyl-; 3-Benzenepropanol; 3-Phenylpropan-1-ol; 3-Phenylpropanol; 3-Phenylpropyl alcohol; Benzenepropanol; gamma-Phenylpropanol; gamma-Phenylpropyl alcohol; Hydrocinnamic alcohol; Hydrocinnamyl alcohol; Phenylpropyl alcohol; Propanol, 3-phenyl-|
Synonym: 3-Phenylpropyl alcohol; (3-Hydroxypropyl)benzene; 1-Propanol, 3-phenyl-; 3-Benzenepropanol; 3-Phenylpropan-1-ol; 3-Phenylpropanol; 3-Phenylpropyl alcohol; Benzenepropanol; gamma-Phenylpropanol; gamma-Phenylpropyl alcohol; Hydrocinnamic alcohol; Hydrocinnamyl alcohol; Phenylpropyl alcohol; Propanol, 3-phenyl-
SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: None Listed.
SECTION 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW The toxicological properties of this material have not been fully investigated. Potential Health Effects
May cause eye irritation.
Causes moderate skin irritation. Low hazard for usual industrial handling.
May cause irritation of the digestive tract. Expected to be a low ingestion hazard.
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
No information found.
SECTION 4 - FIRST AID MEASURES
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
SECTION 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Provide ventilation.
SECTION 7 - HANDLING and STORAGE
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 122-97-4: Personal Protective Equipment
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Clear liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 0.5 hPa @ 20 C
Viscosity: 20 MPA 20.00 deg C
Boiling Point: 235 deg C @ 760.00mm Hg
Freezing/Melting Point: -18 deg C
Autoignition Temperature: 430 deg C ( 806.00 deg F)
Flash Point: 109 deg C ( 228.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: practically insoluble
Specific Gravity/Density: 1.0080g/cm3
Molecular Formula: C9H12O
Molecular Weight: 136.19
SECTION 10 - STABILITY AND REACTIVITY
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.
SECTION 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 122-97-4: UB8970000
CAS# 122-97-4: Draize test, rabbit, skin: 500 mg/24H Moderate; Oral,
rat: LD50 = 2300 mg/kg; Skin, rabbit: LD50 = 5 gm/kg.
3-Phenyl-1-propanol - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
SECTION 12 - ECOLOGICAL INFORMATION
SECTION 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations.
SECTION 14 - TRANSPORT INFORMATION IATA Not regulated as a hazardous material. IMO Not regulated as a hazardous material. RID/ADR Not regulated as a hazardous material.
SECTION 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Safety Phrases: S 24/25 Avoid contact with skin and eyes. WGK (Water Danger/Protection) CAS# 122-97-4: 1 Canada CAS# 122-97-4 is listed on Canada's DSL List. CAS# 122-97-4 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 122-97-4 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION
MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003 The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if the company has been advised of the possibility of such damages.
SECTION 16 - ADDITIONAL INFORMATION