Recommended Suppliersmore
Vanillin 121-33-5 MSDS
Name: Vanillin Material Safety Data Sheet
Synonym: Vanilla; Vanillaldehyde; 4-Hydroxy-m-anisaldehyde; 4-Hydroxy-3-methoxy-benzaldehyde; Lioxin; Methyl-protocatechualdehyde; p-Vanil
CAS: 121-33-5
Section 1 - Chemical Product   MSDS Name:Vanillin Material Safety Data Sheet
Synonym:Vanilla; Vanillaldehyde; 4-Hydroxy-m-anisaldehyde; 4-Hydroxy-3-methoxy-benzaldehyde; Lioxin; Methyl-protocatechualdehyde; p-Vanil

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
121-33-5 Vanillin 100 204-465-2
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Light sensitive.Moisture sensitive.
Potential Health Effects
Eye:
Dust may cause mechanical irritation. Low hazard for normal industrial handling.
Skin:
Dust may cause mechanical irritation. May cause skin sensitization, an allergic reaction, which becomes evident upon re-exposure to this material. Low hazard for usual industrial handling.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
No hazard expected in normal industrial use. Dust is irritating to the respiratory tract.
Chronic:
Not available.

Section 4 - FIRST AID MEASURES
  Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Wash clothing before reuse. Flush skin with plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Treat symptomatically and supportively. Get medical aid if irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use agent most appropriate to extinguish fire.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up, then place into a suitable container for disposal. Provide ventilation.

Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Store protected from light.
Storage:
Store in a cool, dry place. Store protected from moisture. Store protected from light.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 121-33-5: Russia: 1.5 mg/m3 TWA Personal Protective Equipment Eyes: Wear safety glasses and chemical goggles if splashing is possible.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Solid
Color: very slightly yellow
Odor: vanilla-like
pH: Not available.
Vapor Pressure: 1 mm Hg @ 107 deg C
Viscosity: Not applicable.
Boiling Point: 285 deg C
Freezing/Melting Point: 81-83 deg C
Autoignition Temperature: Not available.
Flash Point: 147 deg C ( 296.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not applicable.
Solubility in water: Slightly soluble in water.
Specific Gravity/Density: 1.05
Molecular Formula: C8H8O3
Molecular Weight: 152.0542

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, moisture.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, light, air, strong reducing agents, moisture, bromine, perchloric acid, potassium t-butoxide, t-chlorobenzene and sodium hydroxide, formic acid and thallium nitrate.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 121-33-5: YW5775000 LD50/LC50:
CAS# 121-33-5: Oral, mouse: LD50 = 3925 mg/kg; Oral, mouse: LD50 = 1480 mg/kg; Oral, rat: LD50 = 1580 mg/kg; Skin, rabbit: LD50 = >5010 mg/kg.
Carcinogenicity:
Vanillin - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
 

Section 13 - DISPOSAL CONSIDERATIONS
  Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.

Section 14 - TRANSPORT INFORMATION
 
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 121-33-5: No information available.
Canada
CAS# 121-33-5 is listed on Canada's DSL List.
CAS# 121-33-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 121-33-5 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220