Recommended Suppliersmore
2,4-dichlorophenol 120-83-2 MSDS
Name: 2 4-Dichlorophenol Material Safety Data Sheet
Synonym: 2,4-Dichlorohydroxybenzene; 2,4-DCP
CAS: 120-83-2
Section 1 - Chemical Product   MSDS Name:2 4-Dichlorophenol Material Safety Data Sheet
Synonym:2,4-Dichlorohydroxybenzene; 2,4-DCP

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
120-83-2
Hazard Symbols: T C N
Risk Phrases:

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Harmful if swallowed. Toxic in contact with skin. Causes burns.
Toxic to aquatic organisms; may cause long-term adverse effects in the aquatic environment.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
May be fatal if absorbed through the skin. Causes skin burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
Causes severe respiratory tract irritation with possible burns.
Chronic:
May cause liver and kidney damage. Chronic exposure may cause blood effects.

Section 4 - FIRST AID MEASURES
  Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid immediately.
Skin:
SPEEDY ACTION IS CRITICAL! Destroy contaminated shoes. In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Material may destroy the nerve endings in the skin; the absence of pain does not necessarily mean the skin has been properly decontaminated.
Antidote: It is recommended that further amounts of 2,4-DCP may be removed from the skin by repeatedly spraying/swabbing the skin with polyethylene or polypropylene glycol mixtures, alternating with rinsing with large quantities of water for 30 minutes.

Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. This material in sufficient quantity and reduced particle size is capable of creating a dust explosion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Solid streams of water may spread fire.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions. Provide ventilation.

Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Use only with adequate ventilation.
Storage:
Store in a cool, dry place. Store in a tightly closed container. Do not store in copper or copper alloy storage vessels. Moisture in 2,4-DCP increases the potential for corrosion, therefore, rendering carbon steel inadequate as a material of construction. Stainless steel should be avoided due to the potential for stress-corrosion cracking.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. EXPOSURE GUIDELINE for 2,4-DCP: Dow Agrosciences industrial hygiene guideline is 1 ppm, Skin. (Immediately absorbed through the skin in amounts that have caused rapid death to humans).
Personal Protective Equipment Eyes: Wear chemical goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin exposure. Nitrile or Neoprene gloves are recommended.
Clothing:
Wear appropriate protective clothing to prevent skin exposure. Recommended personal protective clothing includes neoprene boots and suit of Saranex, Neoprene, or Kapler CPF3.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Crystals
Color: white
Odor: phenolic
pH: Not available.
Vapor Pressure: 0.07 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 209-210 deg C @ 760 mm Hg
Freezing/Melting Point: 41-44 deg C
Autoignition Temperature: 653 deg C ( 1,207.40 deg F)
Flash Point: 104 deg C ( 219.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Slightly soluble.
Specific Gravity/Density: 1.382 @ 60/4C
Molecular Formula: C6H4Cl2O
Molecular Weight: 163.00

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, dust generation.
Incompatibilities with Other Materials:
Oxidizing agents, acid chlorides, copper, steel, acid anhydrides.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 120-83-2: SK8575000 LD50/LC50:
Not available.
Carcinogenicity:
2,4-Dichlorophenol - Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
  Ecotoxicity:
Fish: Fathead Minnow: 7.75 mg/l.; 96 hour; bioassay not specified

Section 13 - DISPOSAL CONSIDERATIONS
  Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.

Section 14 - TRANSPORT INFORMATION
 
IATA
Shipping Name: Toxic Solid, Corrosive, Organic, N.O.S.
Hazard Class: 6.1
UN Number: 2928
Packing Group: II
IMO
Shipping Name: Toxic Solid, Corrosive, Organic, N.O.S.
Hazard Class: 6.1
UN Number: 2928
Packing Group: II
RID/ADR
Shipping Name: Toxic Solid, Corrosive, Organic, N.O.S.
Hazard Class: 6.1
UN Number: 2928
Packing group:

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T C N
Risk Phrases:
R 22 Harmful if swallowed.
R 24 Toxic in contact with skin.
R 34 Causes burns.
R 51/53 Toxic to aquatic organisms; may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 61 Avoid release to the environment. Refer to
special instructions/Safety data sheets.
WGK (Water Danger/Protection)
CAS# 120-83-2: 3
United Kingdom Occupational Exposure Limits
United Kingdom Maximum Exposure Limits
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 120-83-2 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 120-83-2: Not available.
US FEDERAL
TSCA
CAS# 120-83-2 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220