shang hai yi bo sheng wu yi ya...Purity: >95%Lead Time: 7 Day
Baoji Guokang Bio-Technology C...Purity: 99%Lead Time: 5 Day
Chongqing Sipunasi Technology...Purity: 99%Lead Time: 1 Day
Tengzhou Jitian Aroma Chemical...Purity: 97%Lead Time: 7 Day
enlighten Chemical Technology ...Purity: 98%Lead Time: 14 Day
|Name:||2-Acetylfuran, 99% Material Safety Data Sheet|
|Synonym:||2-Furyl methyl ketone; 1-(2-Furanyl)ethanone.|
Synonym: 2-Furyl methyl ketone; 1-(2-Furanyl)ethanone.
SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: None Listed.
SECTION 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW The toxicological properties of this material have not been fully investigated. Potential Health Effects
May cause eye irritation.
May cause skin irritation.
Ingestion of large amounts may cause gastrointestinal irritation.
May cause respiratory tract irritation.
No information found.
SECTION 4 - FIRST AID MEASURES
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
SECTION 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up, then place into a suitable container for disposal.
SECTION 7 - HANDLING and STORAGE
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
Store in a cool, dry place. Keep container closed when not in use. Keep refrigerated. (Store below 4C/39F.)
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits. Exposure Limits CAS# 1192-62-7: Personal Protective Equipment
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Wear appropriate protective gloves and clothing to prevent skin exposure.
Wear appropriate protective clothing to minimize contact with skin.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: colorless or yellow or brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 67 deg C @ 10.00mmHg
Freezing/Melting Point: 29.00 - 30.00 deg C
Autoignition Temperature: Not available.
Flash Point: 71 deg C ( 159.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Solubility in water: slightly soluble in water
Specific Gravity/Density: 1.0980g/cm3
Molecular Weight: 110.11
SECTION 10 - STABILITY AND REACTIVITY
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatibilities with Other Materials:
Strong oxidizing agents; strong bases; and strong reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.
SECTION 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 1192-62-7: OB3870000
CAS# 1192-62-7: Inhalation, rat: LC50 = 1130 mg/m3/4H.
2-Acetylfuran - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
SECTION 12 - ECOLOGICAL INFORMATION
SECTION 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations.
SECTION 14 - TRANSPORT INFORMATION IATA Not regulated as a hazardous material. IMO Not regulated as a hazardous material. RID/ADR Not regulated as a hazardous material.
SECTION 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Safety Phrases: S 24/25 Avoid contact with skin and eyes. WGK (Water Danger/Protection) CAS# 1192-62-7: No information available. Canada CAS# 1192-62-7 is listed on Canada's DSL List. CAS# 1192-62-7 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 1192-62-7 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003 The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if the company has been advised of the possibility of such damages.
SECTION 16 - ADDITIONAL INFORMATION