Recommended Suppliersmore
pyridaphenthion 119-12-0 MSDS

SECTION 1: Identification of the substance/mixture and of the company/undertaking
  Product identifiers
    Product name        : Pyridaphenthion    
    REACH No.        : A registration number is not available for this substance as the substance    
    or its uses are exempted from registration, the annual tonnage does not
    require a registration or the registration is envisaged for a later
    registration deadline.
    CAS-No.        : 119-12-0    
  Relevant identified uses of the substance or mixture and uses advised against
    Identified uses        : Laboratory chemicals, Manufacture of substances    

SECTION 2: Hazards identification
  Classification of the substance or mixture
  Classification according to Regulation (EC) No 1272/2008
    Acute toxicity, Oral (Category 4), H302
    Acute toxicity, Inhalation (Category 4), H332
    For the full text of the H-Statements mentioned in this Section, see Section 16.
  Classification according to EU Directives 67/548/EEC or 1999/45/EC
    N, Xn Dangerous for the        R20/22, R51/53, R57    
    environment, Harmful
    For the full text of the R-phrases mentioned in this Section, see Section 16.
  Label elements
  Labelling according Regulation (EC) No 1272/2008
    Signal word        Warning    
    Hazard statement(s)
    H302 + H332        Harmful if swallowed or if inhaled    
    Precautionary statement(s)        none    
    Supplemental Hazard        none    
  Other hazards - none

SECTION 3: Composition/information on ingredients
    Synonyms        : O,O-Diethyl O-(1,6-dihydro-6-oxo-1-phenylpyridazin-3-yl) thiophosphate    
    Formula        : C14H17N2O4PS    
    Molecular Weight        : 340,33 g/mol    
    CAS-No.        : 119-12-0    
    EC-No.        : 204-298-5    
  Hazardous ingredients according to Regulation (EC) No 1272/2008
    Component        Classification        Concentration    
  O,O-Diethyl O-(1,6-dihydro-6-oxo-1-phenylpyridazin-3-yl) thiophosphate
    Acute Tox. 4; H302 + H332        -    
    For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
  Description of first aid measures
  General advice
    Consult a physician. Show this safety data sheet to the doctor in attendance.
  If inhaled
    If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
  In case of skin contact
    Wash off with soap and plenty of water. Consult a physician.
  In case of eye contact
    Flush eyes with water as a precaution.
  If swallowed
    Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
  Most important symptoms and effects, both acute and delayed
    The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
    section 11
  Indication of any immediate medical attention and special treatment needed
    no data available

SECTION 5: Firefighting measures
  Extinguishing media
  Suitable extinguishing media
    Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
  Special hazards arising from the substance or mixture
    Carbon oxides, nitrogen oxides (NOx), Sulphur oxides, Oxides of phosphorus
  Advice for firefighters
    Wear self contained breathing apparatus for fire fighting if necessary.
  Further information
    no data available

SECTION 6: Accidental release measures
  Personal precautions, protective equipment and emergency procedures
    Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
    adequate ventilation. Avoid breathing dust.
    For personal protection see section 8.
  Environmental precautions
    Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
    environment must be avoided.
  Methods and materials for containment and cleaning up
    Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
    containers for disposal.
  Reference to other sections
    For disposal see section 13.

SECTION 7: Handling and storage
  Precautions for safe handling
    Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
    Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
    For precautions see section 2.2.
  Conditions for safe storage, including any incompatibilities
    Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
  Specific end use(s)
    A part from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
  Control parameters
  Components with workplace control parameters
  Exposure controls
  Appropriate engineering controls
    Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
    at the end of workday.
  Personal protective equipment
  Eye/face protection
    Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
    and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
  Skin protection
    Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
    (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
    contaminated gloves after use in accordance with applicable laws and good laboratory practices.
    Wash and dry hands.
    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
    the standard EN 374 derived from it.
  Body Protection
    Complete suit protecting against chemicals, The type of protective equipment must be selected
    according to the concentration and amount of the dangerous substance at the specific workplace.
  Respiratory protection
    For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
    level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
    Use respirators and components tested and approved under appropriate government standards
    such as NIOSH (US) or CEN (EU).
  Control of environmental exposure
    Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into
    the environment must be avoided.

SECTION 9: Physical and chemical properties
  Information on basic physical and chemical properties
    a) Appearance        Form: solid    
    Colour: white
    b) Odour        no data available    
    c) Odour Threshold        no data available    
    d) pH        no data available    
    e) Melting point/freezing        55,7 - 56,7 °C    
    f) Initial boiling point and 180 °C - Decomposes on heating.
    boiling range
    g) Flash point        no data available    
    h) Evapouration rate        no data available    
    i) Flammability (solid, gas) no data available
    j) Upper/lower        no data available    
    flammability or
    explosive limits
    k) Vapour pressure        no data available    
    l) Vapour density        no data available    
    m) Relative density        1,334 g/cm3 at 20 °C    
    n) Water solubility        0,055 g/l at 20 °C    
    o) Partition coefficient: n- log Pow: 3,2
    p) Auto-ignition        no data available    
    q) Decomposition        no data available    
    r) Viscosity        no data available    
    s) Explosive properties        no data available    
    t) Oxidizing properties        no data available    
  Other safety information
    no data available

SECTION 10: Stability and reactivity
    no data available
  Chemical stability
    Stable under recommended storage conditions.
  Possibility of hazardous reactions
    no data available
  Conditions to avoid
    no data available
  Incompatible materials
    Strong oxidizing agents
  Hazardous decomposition products
    Other decomposition products - no data available
    In the event of fire: see section 5

SECTION 11: Toxicological information
  Information on toxicological effects
  Acute toxicity
    LD50 Oral - rat - 424 mg/kg
    LC50 Inhalation - rat - 4 h - 1.100 mg/m3
    LD50 Dermal - rat - 2.100 mg/kg
  Skin corrosion/irritation
    no data available
  Serious eye damage/eye irritation
    no data available
  Respiratory or skin sensitisation
    no data available
  Germ cell mutagenicity
    no data available
    IARC:        No component of this product present at levels greater than or equal to 0.1% is identified as    
    probable, possible or confirmed human carcinogen by IARC.
  Reproductive toxicity
    no data available
  Specific target organ toxicity - single exposure
    no data available
  Specific target organ toxicity - repeated exposure
    no data available
  Aspiration hazard
    no data available
  Additional Information
    RTECS: TF2275000

SECTION 12: Ecological information
    Toxicity to fish        LC50 - Oncorhynchus mykiss (rainbow trout) - 7,5 mg/l - 96,0 h    
  Persistence and degradability
  Bioaccumulative potential
    Bioaccumulation        Cyprinus carpio (Carp) - 168 h    
    - 3,4 µg/l
    Bioconcentration factor (BCF): 6
  Mobility in soil
    no data available
  Results of PBT and vPvB assessment
    PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
  Other adverse effects
    Toxic to aquatic life.

SECTION 13: Disposal considerations
  Waste treatment methods
    Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
    professional waste disposal service to dispose of this material. Dissolve or mix the material with a
    combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
  Contaminated packaging
    Dispose of as unused product.

SECTION 14: Transport information
  UN number
    ADR/RID: 3077        IMDG: 3077        IATA: 3077    
  UN proper shipping name
    dihydro-6-oxo-1-phenylpyridazin-3-yl) thiophosphate)
    dihydro-6-oxo-1-phenylpyridazin-3-yl) thiophosphate)
    IATA:        Environmentally hazardous substance, solid, n.o.s. (O,O-Diethyl O-(1,6-dihydro-6-oxo-1-    
    phenylpyridazin-3-yl) thiophosphate)
  Transport hazard class(es)
    ADR/RID: 9        IMDG: 9        IATA: 9    
  Packaging group
    ADR/RID: III        IMDG: III        IATA: III    
  Environmental hazards
    ADR/RID: yes        IMDG Marine pollutant: yes        IATA: yes    
  Special precautions for user
  Further information
    EHS-Mark required (ADR, IMDG code 2.10.3) for single packagings and combination
    packagings containing inner packagings with Dangerous Goods > 5L for liquids or > 5kg for solids.

SECTION 15: Regulatory information
    This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
  Safety, health and environmental regulations/legislation specific for the substance or mixture
    no data available
  Chemical Safety Assessment
    For this product a chemical safety assessment was not carried out

SECTION 16: Other information
  Full text of H-Statements referred to under sections 2 and 3.
    Acute Tox.        Acute toxicity    
    H302        Harmful if swallowed.    
    H302 + H332        Harmful if swallowed or if inhaled    
    H332        Harmful if inhaled.    
  Full text of R-phrases referred to under sections 2 and 3
    R20/22        Harmful by inhalation and if swallowed.    
    R51/53        Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic    
    R57        Toxic to bees.    
  Further information
    Copyright 2013 Co. LLC. License granted to make unlimited paper copies for internal use
    The above information is believed to be correct but does not purport to be all inclusive and shall be
    used only as a guide. The information in this document is based on the present state of our knowledge
    and is applicable to the product with regard to appropriate safety precautions. It does not represent any
    guarantee of the properties of the product. Corporation and its Affiliates shall not be held
    liable for any damage resulting from handling or from contact with the above product. See
     and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220